LHA-1 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Ultra High IP3
  • Broadband High Dynamic Range without external Matching Components Product Overview LHA-1+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the LHA-1+, unlike competitive models, is well matched (input and output) over a broad frequency range without the need for external matching components. Lead finish is tin-silver over nickel. It is enclosed in a 3x3 mm MCLP package for low parasitic interface. LHA-1+ Key Features Feature Advantages Broad Band: 0.05 to 6.0 GHz Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX Extremely High IP3 versus DC power Consumption 40 dBm typical at 2 GHz The LHA-1+ matches industry leading IP3 performance relative to device size and pow- er consumption. The combination of the design and E-PHEMT Structure provides en - hanced linearity over a broad frequency range as evidence in the IP3 being typically 17 dB above the P 1dB point. This feature makes this amplifier ideal for use in:
  • Driver amplifiers for complex waveform up converter paths
  • Drivers in linearized transmit systems
  • Secondary amplifiers in ultra High Dynamic range receivers No External Matching Components Required LHA-1+ provides Input and Output Return Loss of 10-21 dB up to 4 GHz without the need for any external matching components Low Noise Figure: 2.6dB typ. up to 4 GHz 3.4dB typ. up to 6 GHz A unique feature of the LHA-1+ which separates this design from all competitors is the low noise figure performance in combination with the high dynamic range. 50Ω 0.05 to 6 GHz MCLP PACKAGE

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits simplified schematic and pin description Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Ap- plication Circuit”, Fig. 2 GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. 0.05-6 GHz CASE STYLE: FG873 LHA-1+ Product Features

  • High IP3, 40 dBm typ. at 2 GHz, 5V
  • Gain, 14.1 dB typ. at 2 GHz, 5V
  • High Pout, P1dB 22.7 dBm typ. at 2 GHz, 5V
  • Low noise figure, 2.1 dB @2 GHz, 5V
  • Usable to 4.0V
  • No external matching components required REV. A M151107 LHA-1+ TH/RS/CP/AM 150819 General Description LHA-1+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition, the LHA-1+ has well matched input and output over a broad frequency range without the need for external matching components. Lead finish is tin-silver over nickel. It has repeatable performance from lot to lot and is enclosed in a 3 x 3 mm MCLP package for low parasitic interface. Typical Applications
  • Base station infrastructure
  • Portable Wireless
  • CATV & DBS
  • MMDS & Wireless LAN
  • LTE RF-IN RF-OUT and DC-IN GND +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications INDEX ON TOP GND(4) BOTTOM VIEW GND (2) RF OUT and DC IN (3) RF IN (1)

Monolithic E-PHEMT MMIC Amplifier Page 3 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Operating Current at 5V 210 mA Power Dissipation 1 W Input Power (CW) 24 dBm DC Voltage on Pin 3 6 V Note: Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation. Absolute Maximum Ratings Electrical Specifications1 at 25°C, unless noted LHA-1+ (1) Measured on Mini-Circuits Characterization test board TB-784+. See Characterization Test Circuit (Fig. 1) (2) (Current at 85°C — Current at -45°C)/130 DC Current Histogram 110 115 120 125 130 135 140 145 150 155 160 165 170 175 DC Current (mA) LSL USL Parameter Condition (GHz) Vd=5.0V Vd=4.5V Vd=4.0V Units Frequency Range 0.05 6 0.05-6 0.05-6 GHz Input Return Loss 0.05 — 11.2 — 11.2 11.1 dB Output Return Loss 0.05 — 14.1 — 14.0 13.8 dB Reverse Isolation 2.0 19.3 19.1 18.7 dB Output IP3 0.05 — 40.3 — 39.0 35.2 dBm Noise Figure 0.05 1.8 1.7 1.7 dB 0.8 2.0 2.0 2.0 2.0 2.1 2.0 2.0 3.0 2.3 2.2 2.2 4.0 2.6 2.4 2.4 6.0 3.4 3.2 3.0 Device Operating Current 110 146 180 114 87 mA Device Current Variation vs. Tem- perature(2) 116 138 138 µA/°C Device Current Variation vs Voltage 116 0.057 — 0.055 0.055 mA/mV Thermal Resistance, junction-to-ground lead 59 59 59 °C/W

Monolithic E-PHEMT MMIC Amplifier Page 4 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits LHA-1+ Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-784+) Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 5 dBm/tone at output. Characterization Test Circuit Recommended Application Circuit Cblock IN Cblock Ibias OUT Vd RFC Cbypass Vcc Fig 2. Test Board includes case, connectors, and components soldered to PCB Product Marking RF-IN RF-OUT3 Vcc (Supply voltage) BLK-18+ Bias-Tee ZX85-12G-S+ DUT TB-313 2,4 +5V 784+ MCL LHA1

Monolithic E-PHEMT MMIC Amplifier Page 5 of 5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits LHA-1+ Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start MSL Test Flow Chart ESD Rating Human Body Model (HBM): Class 1A (250 to <500V) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 (>25V) in accordance with ANSI/ESD STM5.2-1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D Performance Data Data Table Swept Graphs S-Parameter (S2P Files) Data Set (.zip file) Case Style FG873 (3x3 mm MCLP) Plastic package, exposed paddle lead finish: tin-silver over nickel Tape & Reel F68 Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices Suggested Layout for PCB Design PL-443 Evaluation Board TB-819+ Environmental Ratings ENV08T1 Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Stop Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp