LH1-021-300 ROSENBERGER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
15 MEASUREMENT CABLE LH1-021-XXX
Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 RF_35/08.06/4.0 All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to 15K101-40M IEC 60169-15 Suitable cables RTK 013, cable group H1 Micro coax cable d=1.37mm, center conductor AWG30 Connector are only sold with cable Minimum bending radius single 4x ø Minimum bending radius repeated 8x ø Documents Technical data sheet Micro RF plug 15S209-3H1E4 Technical data sheet SMA plug 32S101-3H1L5 Technical data sheet cable RTK 013 Available Variants Standard length available and customized length on request Electrical data Impedance 50 Ω Frequency DC to 6 GHz Return loss ≤ -25 dB at 2 GHz (Simulated) ≤ -22 dB at 3 GHz ≤ -16 dB at 6 GHz Insulation resistance ≥ 0.5 x103 MΩ Center contact resistance ≤ 50 mΩ Outer contact resistance ≤ 50 mΩ Working voltage 4 V Type Length a [mm] Weight [g] LH1-021-100 100 4.5 LH1-021-300 300 8.2 LH1-021-600 600 9.6
Micro RF CABLE CONNECTOR LH1-021-XXX Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 RF_35/08.06/4.0 Mechanical data Mating form Snap-on Mating cycles > 10,000 Mating force < 6N Unmating force > 7N Environmental data Temperature range -40°C to +90°C 2002/95/EC (RoHS) compliant Cables Cable group H1 Micro coax cable H1 (RTK 013) Center conductor AWG 30 Mating and un-mating For the reliable mating and un-mating follow the precautions : 1. The vertical mating axis of the PCB receptacle and the adapter has to be aligned during the connecting and a hearable click will confirm that the connectors are mated correctly. 2. The disconnection of the 2 connectors is carried out by vertical pulling of the adapter. 3. The connectors should not be mated under an extreme angle. 4. The mating force should be in the limits 5 N ≤ F ≤ 10 N misalignment max. 5° Packing Standard 1 pcs in plastic bag Draft Date Approved Date Rev. Engineering change number Name Date While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.