LH0041

LH0041 NSC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Features

LH0021 1.0 Amp LH0041 0.2 Amp Y Output voltage swing LH0021 g12V into 10 X LH0041 g14V into 100 X Y Wide full power bandwidth 15 kHz Y Low standby power 100 mW at g15V Y Low input offset voltage and current 1 mV and 20 nA Y High slew rate 3.0V/ ms Y High open loop gain 100 dB Schematic Diagram TL/H/9298–1 *RSC external on ‘‘G’’ and ‘‘K’’ packages. R SC internal on ‘‘J’’ package. Offset Null connec- tions available only on ‘‘G’’ package. C1995 National Semiconductor Corporation RRD-B30M115/Printed in U. S. A.

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage g18V Power Dissipation See Curves Differential Input Voltage g30V Input Voltage (Note 1) g15V Peak Output Current (Note 2) LH0021/LH0021C 2.0 Amps LH0041/LH0041C 0.5 Amps Output Short Circuit Duration (Note 3) Continuous Operating Temperature Range LH0021/LH0041 b55§Ct o a125§C LH0021C/LH0041C b25§Ct o a85§C Storage Temperature Range b65§Ct o a150§C Lead Temperature (Soldering, 10 sec.) 300 §C ESD rating to be determined. Limits Parameter Conditions LH0021 LH0021C Units Min Typ Max Min Typ Max Input Offset Voltage R S k 100X,T C e 25§C 1.0 3.0 3.0 6.0 mV RS k 100X 5.0 7.5 mV Voltage Drift with Temperature R S k 100X 32 5 53 0 mV/§C Offset Voltage Drift with Time 5 5 mV/week Offset Voltage Change with Output Power 5 15 5 20 mV/W Input Offset Current T C e 25§C 30 100 50 200 nA 300 500 nA Offset Current Drift with Temperature 0.1 1.0 0.2 1.0 nA/ §C Offset Current Drift with Time 2 2 nA/week Input Bias Current T C e 25§C 100 300 200 500 nA 1.0 1.0 mA Input Resistance T C e 25§C 0.3 1.0 0.3 1.0 M X Input Capacitance 33 p F Common Mode Rejection Ratio R S 100X, DVCM e g10V 70 90 70 90 dB Input Voltage Range V S e g15V g12 g12 V Power Supply Rejection Ratio R S s 100X, DVS e g10V 80 96 70 90 dB Voltage Gain V S e g15V, V O e g10V RL e 1k X,T C e 25§C 100 200 100 200 V/mV VS e g15V, V O e g10V RL e 100X 25 20 V/mV Output Voltage Swing V S e g15V, R L e 100X g13.5 14 g13 g14 V VS e g15V, R L e 10X,T C e 25§C g11.0 g12 g10 g12 V Power Supply Current V S e g15V, V OUT e 0 2.5 3.5 3.0 4.0 mA Power Consumption V S e g15V, V OUT e 0 75 105 90 120 mW Limits Parameter Conditions LH0021 LH0021C Units Min Typ Max Min Typ Max Slew Rate A V ea 1, R L e 100X 0.8 3.0 1.0 3.0 V/ ms Power Bandwidth R L e 100X 20 20 kHz Small Signal Transient Response 0.3 1.0 0.3 1.5 ms Small Signal Overshoot 5 20 10 30 % Settling Time (0.1%) DVIN e 10V, A V ea 14 4 ms Overload Recovery Time 3 3 ms Harmonic Distortion f e 1 kHz, P O e 0.5W 0.2 0.2 % Input Noise Voltage R s e 50X, B.W. e 10 Hz to 10 kHz 5 5 mV/rms Input Noise Current B.W. e 10 Hz to 10 kHz 0.05 0.05 nA/rms

Parameter Conditions LH0041 LH0041C Units Min Typ Max Min Typ Max Input Offset Voltage R S k 100X,T A e 25§C 1.0 3.0 3.0 6.0 mV RS k 100X 5.0 7.5 mV Voltage Drift with Temperature R S k 100X 35 mV/§C Offset Voltage Drift with Time 5 5 mV/week Offset Voltage Change with Output Power 15 15 mV/W Offset Voltage Adjustment Range (Note 5) 20 20 mV Input Offset Current T A e 25§C 30 100 50 200 nA 300 500 nA Offset Current Drift with Temperature 0.1 1.0 0.2 1.0 nA/ §C Offset Current Drift with Time 2 2 nA/week Input Bias Current T A e 25§C 100 300 200 500 nA 1.0 1.0 mA Input Resistance T A e 25§C 0.3 1.0 0.3 1.0 M X Input Capacitance 3 3 pF Common Mode Rejection Ratio R S 100X, DVCM e g10V 70 90 70 90 dB Input Voltage Range V S e g15V a12 a12 V Power Supply Rejection Ratio R S s 100X, DVS e g10V 80 96 70 90 dB Voltage Gain V S e g15V, V O e g10V RL e 1k X,T A e 25§C 100 200 100 200 V/mV VS e g15V, V O e g10V RL e 100X 25 20 V/mV Output Voltage Swing V S e g15V, R L e 100X g13 14 g13 g14 V Output Short Circuit Current V S e g15V, T A e 25§C 200 300 200 300 mA (Note 6) Power Supply Current V S e g15V, V OUT e 0 2.5 3.5 3.0 4.0 mA Power Consumption V S e g15V, V OUT e 0 75 105 90 120 mW Limits Parameter Conditions LH0041 LH0041C Units Min Typ Max Min Typ Max Slew Rate A V ea 1, R L e 100X 1.5 3.0 1.0 3.0 V/ ms Power Bandwidth R L e 100X 20 20 kHz Small Signal Transient Response 0.3 1.0 0.3 1.5 ms Small Signal Overshoot 5 20 10 30 % Settling Time (0.1%) DVIN e 10V, A V ea 14 4 ms Overload Recovery Time 3 3 ms Harmonic Distortion f e 1 kHz, P O e 0.5W 0.2 0.2 % Input Noise Voltage R s e 50X, B.W. e 10 Hz to 10 kHz 5 5 mV/rms Input Noise Current B.W. e 10 Hz to 10 kHz 0.05 0.05 nA/rms Note 1: Rating applies for supply voltages above g15V. For supplies less than g15V, rating is equal to supply voltage. Note 2: Rating applies for LH0041G and LH0021K with R SC e 0X. Note 3: Rating applies as long as package power rating is not exceeded. Note 4: Specifications apply for g5V s VS g18V, and b55§C s TC e s 125§C for LH0021K and LH0041G, and b25§C s TC s a85§C for LH0021CK, LH0041CG and LH0041CJ unless otherwise specified. Typical values are for 25 §C only. Note 5: TO-8 ‘‘G’’ packages only. Note 6: Rating applies for ‘‘J’’ DIP package and for TO-8 ‘‘G’’ package with R SC e 3.3 ohms. Note 7: See Typical Performance Characteristics.

Typical Performance Characteristics Power Derating-LH0021 Safe Operating AreaÐLH0021 LH0041/LH0041C Package Power Dissipation Output Voltage Swing Response Open Loop Frequency Response Large Signal Frequency Response Voltage Follower Pulse No Load Supply Current Temperature LH0021/LH0021C Short Circuit Current vs Short Circuit Current vs Temperature LH0041/LH0041C Input Bias Current Voltage Gain TL/H/9298–6

Typical Performance Characteristics (Continued) Input Current Input Voltage Range Input Noise Voltage Input Noise Current Distortion vs Frequency TL/H/9298–7 Connections Diagrams TL/H/9298–2 Top View Order Number LH0021K or LH0021CK See NS Package Number K08A TL/H/9298–3 Order Number LH0041G or LH0041CG See NS Package Number H12B

Connection Diagrams (Continued) TL/H/9298–4 Top View Order Number LH0041CJ See NS Package Number HY08A TL/H/9298–5 Order Number LH0041E See NS Package Number E48A Typical Applications Programmable One Amp Power Supply TL/H/9298–8

Typical Applications (Continued) 10W (rms) Audio Amplifier TL/H/9298–9 Dual Tracking One Amp Power Supply TL/H/9298–10

Typical Applications (Continued) CRT Deflection Yoke Driver TL/H/9298–11 Two Way Intercom TL/H/9298–12 Programmable High Current Source/Sink TL/H/9298–13

Typical Applications (Continued) Power Comparator *Type 327 Lamp TL/H/9298–14 DC Servo Amplifier TL/H/9298–15 Auxiliary Circuits LH0021 Unity Gain Circuit with Short Circuit Limiting ISC e 0.7 RSC e 1.4 amps TL/H/9298–16 LH0041G Unity Gain with Short Circuit Limiting IDC e 0.7 RSC e 210 mA TL/H/9298–17 LH0041/LH0021 Offset Voltage Null Circuit (LH0041CJ Pin Connections Shown) * R1 e R3 AV eb R2 TL/H/9298–18 LH0041G Offset Voltage Null Circuit * R1 e R3 AV eb R2 TL/H/9298–19

Auxiliary Circuits (Continued) Operation from Single Supplies TL/H/9298–20 TL/H/9298–21

Auxiliary Circuits (Continued) Operation from Non-Symmetrical Supplies TL/H/9298–22 TL/H/9298–23 *For additional offset null circuit techniques see National Linear Applications Handbook. Physical Dimensions inches (millimeters) Leadless Chip Carrier (E) Order Number LH0041E

Physical Dimensions inches (millimeters) (Continued) Metal Can Package (H) Order Number LH0041G or LH0041CG

Physical Dimensions inches (millimeters) (Continued) Ceramic Hybrid Package (HY) Order Number LH0041CJ

LH0021/LH0021C 1.0 Amp Power Operational Amplifier LH0041/LH0041C 0.2 Amp Power Operational Amplifier Physical Dimensions inches (millimeters) (Continued) Metal Can Package (K) Order Number LH0021K or LH0021CK LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant support device or system whose failure to perform can into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life failure to perform, when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can effectiveness. be reasonably expected to result in a significant injury to the user. National Semiconductor National Semiconductor National Semiconductor National Semiconductor Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: (

a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309 Arlington, TX 76017 Email: cnjwge @ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408 Tel: 1(800) 272-9959 Deutsch Tel: ( a49) 0-180-530 85 85 Tsimshatsui, Kowloon Fax: 1(800) 737-7018 English Tel: ( a49) 0-180-532 78 32 Hong Kong Fran3ais Tel: ( a49) 0-180-532 93 58 Tel: (852) 2737-1600 Italiano Tel: ( a49) 0-180-534 16 80 Fax: (852) 2736-9960 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.