DS187 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

DS187 LUXEON F ES Cool White Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT FEATUrEs And BEnEFITs PrIMAry APPlIcATIOns Higher drive current capability for increased flux performance Daytime Running Lights Low thermal resistance for better hot lumen performance Front Fog Standard packaging for low cost and ease of manufacturability Headlight Hot binned at 85°C monopulse (MP) to match closer to operating conditions IEC/PAS 62707-1 White LED LUXEON F ES Cool White LEDs are the only automotive LEDs that deliver design flexibility and advanced functionality. These products, with their miniaturized form factor, are designed to support daytime running lights, front fog and low and high beam applications. The Lumileds automotive binning structure meets both SAE and ECE color specifications and is hot binned at 85°C, consistent with actual automotive operational environments. LUXEON F ES Cool White provides an industry-leading solution for your front automotive lights applications. All LUXEON F LEDs are IEC-60810 qualified. lUXEOn F Es cool White Industry-leading solutions for light guide DRL, and signature lamps

DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON F ES Cool White LEDs are tested and binned using a 20ms monopulse (MP) at 700mA drive current, case temperature, Tc, of 85°C. Part Number Nomenclature Part numbers for LUXEON F ES Cool White follow the convention below: L F X H – A B C – E F G H Where: L – designates LUXEON F – designates LUXEON F product family X H – designates hot binning A – designates color variant (C=White) B – designates die size (2=2mm2) C – designates binning current (B=700mA) E – designates future product offerings F G H – designates minimum luminous flux Therefore, the following part number is used for a LUXEON F ES Cool White with a minimum luminous flux of 220 lumens: L F X H – C 2 B – 0 2 2 0 Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON F ES Cool White is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). Tj = LED junction temperature Tc = Tsolder = Case Temperature Tsensor = Temperature at thermo sensor location (not solder location) Figure 1 . Example of case temperature location on sample board for LUXEON F ES Cool White .

DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 3 Performance Characteristics Product Selection Guide Table 1 . Product selection for LUXEON F ES Cool White at 20ms MP test current, T c=85°C . MInIMUM lUMInOUs FlUX [1] (lm) TEsT cUrrEnT (m A) PArT nUMBEr 220 700 LFXH-C2B-0220 240 700 LFXH-C2B-0240 260 700 LFXH-C2B-0260 Notes for Table 1: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. Optical Characteristics Table 2 . Typical optical characteristics for LUXEON F ES Cool White at 20ms MP test current, T c=85°C . PArT nUMBEr cOrrElATEd cOlOr TEMPErATUrE TOTAl InclUdEd AnglE [1] θ0.90V VIEWIng AnglE [2] 2θ1/2MInIMUM MAXIMUM LFXH-C2B-0xxx 5500K 6680K 140° 120° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.Electrical and Thermal Characteristics Table 3 . Electrical characteristics for LUXEON F ES Cool White at 20ms MP test current, T c=85°C . PArT nUMBEr FOrWArd VOlTAgE [1] (Vf) dynAMIc rEsIsTAncE [2] (Ω) Rd TEMPErATUrE cOEFFIcIEnT OF FOrWArd VOlTAgE [3] (mV/°C) ΔVf / ΔTj TyPIcAl ThErMAl rEsIsTAncE— JUncTIOn TO cAsE (°c/W) rθj-c el [4] rθj-c real [5] MInIMUM MAXIMUM TyPIcAl MAXIMUM TyPIcAl MAXIMUM Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs (see Figure 4a. Typical forward current vs. forward voltage). 3. Measured between T c=80°C and Tc=90°C at binning current. 4. Rθj-c el: Electrical thermal resistance (junction to case).

DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 4 Absolute Ratings Table 4 . Absolute ratings for LUXEON F ES Cool White . PArAMETEr PErFOrMAncE Minimum DC Forward Current 50mA Maximum DC Forward Current 1000mA Maximum Junction Temperature [1] 150°C Operating Case Temperature at Test Current [1] -40°C to 120°C Operating Case Temperature at Maximum Current [1] -40°C to 120°C LED Storage Temperature -40°C to 130°C Maximum Soldering Temperature 260°C Allowable Reflow Cycles 3 ESD Sensitivity [2] ±8kV HBM, ±400V MM, ±2kV CDM Reverse Voltage (Vreverse) LUXEON F LEDs are not designed to be driven in reverse bias Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum. LUXEON F LEDs driven at or above maximum LED case temperature may have a shorter lifetime. 2. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101). JEDEC Moisture Sensitivity Table 5 . Moisture sensitivity levels for LUXEON F ES Cool White . lEVEl FlOOr lIFE sTAndArd sOAk rEqUIrEMEnT TIME cOndITIOns TIME cOndITIOns

1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH

to request the flux bin range with best supportability for program timing. technical datasheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage. particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 6. Luminous flux bin definitions for LUXEON F ES Cool White at 20ms MP test current, T c=85°C .

  1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.

DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. 11 Color Codes Notes for Figure 9: 1. Lumileds supports the following bins for LUXEON F ES Cool White: H2 and HC. 2. LUXEON F historical large color notations. Color bins must be ordered by fine bin designators, shown below. H1 = 1A, 1B, 1C, 1D H2 = 2A, 2B, 2C, 2D H3 = 3A, 3B, 3C, 3D H4 = 4A, 4B, 4C, 4D HC = 1D, 2C, 3B, 4A Figure 9 . Color bin structure in CIE 1931 color space for LUXEON F ES Cool White . 0.3 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 y x

Table 7. Color bin definitions for LUXEON F ES Cool White.

  1. Lumileds maintains a tester tolerance of ± 0.005 on x and y color coordinates.
  2. CIE 1931 x and y coordinate frame.

Table 8. Forward voltage bin definitions for LUXEON F ES Cool White.

  1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
  2. Although several bins are outlined, product availability in a particular bin varies by production run and product performance.
  3. Drawings are not to scale.
  4. All dimensions are in millimeters.

Figure 10 . Mechanical dimensions for LUXEON F ES Cool White .

DS187 LUXEON F ES Cool White Product Datasheet 20171108 ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents. About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com.