LF9412 MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Specification for an Highpass LC Filter MtronPTI P/N: LF9412 Rev. - 09/06/12 Page 1 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI I. General & Electrical Requirements 1. Corner Frequency (FON): 1215MHz 2. Passband: 1215MHz to 1400MHz 3. Passband Insertion Loss: ≤ 0.7dB 4. Passband VSWR: ≤ 1.4:1 5. Passband Phase Linearity: ≤ 9 6. Rejection (Minimum, Relative to Insertion Loss) 35dB: 960MHz to 1100MHz 7. Signal Level: ≤ -16dBm CW, ≤ +51dBm 2msec pulsed 40% duty cycle 8. ZS/ZL: 50Ω nominal Note: The filter shall meet all performance requirements over the full operating temperature range ( -40C to +85C) II. Environmental & Physical Requirements: 1. Temperature Range Operating: -40C to +85C Non-Operating: -55C to +125C 2. Altitude: Operating: Sea Level to 10,000-ft Non-Operating: Sea Level to 40,000-ft 3. Humidity: 0 to 100% Relative Humidity 4. Salt Atmosphere: Per MIL-STD-810F, Method 521.2 5. Vibration: Per MIL-STD-810F, Method 514.5, Category 4, 6, 11, 17, 18 & 21, Procedure I, II & IV 6. Shock: Per MIL-STD-810F, Method 516.5, Procedure I (Functional) & VII (Rail) 7. Temperature Cycling: Per MIL-STD-883, Method 1010.8, Test Condition B 8. Materials and Finish: Non-nutrient to fungus and non-corrosive in the specified application environment 9. Package (see Figure 1): Figure 1 –Filter Package Outline Drawing
Specification for an Highpass LC Filter MtronPTI P/N: LF9412 Rev. - 09/06/12 Page 2 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI