LF9403 MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Specification for an SMD LC Band Reject Filter MtronPTI P/N: LF9403 Page 1 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI I. General & Electrical Requirements 1. Upper Passband Characteristics: Passband @ 4dB: 20.1MHz to 30.0MHz Passband @ 6dB: 20.05MHz to 20.1MHz Return Loss: 10dB minimum 2. Band Reject Characteristics 16dB: 19.0Hz to 19.9MHz 3. Signal Level: +20dBm (CW) with a 2:1 load 4. ZIN/ZOUT: 50Ω nominal Note: All performance parameters are to be validated at the prototype build. II. Environmental & Physical Requirements: 1. Temperature Range Operating: -40C to +85C Storage: -45C to +90C 2. Vibration: 10g 3. Solderability: Per EIAJ-STD-002 4. Package (see Figure 1): Figure 1 – Suggested Filter Package Outline & Recommended PAD Layout Drawings
Specification for an SMD LC Band Reject Filter MtronPTI P/N: LF9403 Page 2 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI III. Design Simulation Plots: IV. Maximum Solder Reflow Profile: V. Data Sheet Revision Table: Date Rev. Author Details of Revision 06/18/12 - BRM Initial Release.