LF9348 MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Specification for a Bandpass LC Filter MtronPTI P/N: LF9348 Rev. - 07/28/11 Page 1 of 1 Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence. Information may not be copied or divulged without written permission from MtronPTI. I. General & Electrical Requirements: Center Frequency (FON): 10.0MHz Bandwidth @ 3dB: ≥ 1.0MHz Insertion Loss (at the peak of transmission within the 3dB bandwidth): ≤ 3.0dB Rejection (minimum, ref. to IL): 30dB: FON ±2MHz maximum ZIN/ZOUT: 50Ω nominal Note: Sn10 high temperature solder is utilized in the construction of this filter in support of automated assembly & reflow processing. II. Environmental & Physical Requirements: 1. Temperature Ranges Operating (OTR): -40C to +85C Storage (STR): -45C to +90C 2. Per EIAJ Per EIAJ-STD-002 3. Seal: Waterproof, supports post-reflow aqueous/non-aqueous wash 4. Package: (reference drawing) 5. Tape & Reel Available: 100-units/reel minimum 6. Package: (reference drawing) Recommended PAD Layout Package Outline Drawing Recommended Reflow Soldering Profile