LF07WBJ-3S

LF_18 HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

2018.7ᶆ 36.4 Receptacle Plug Ø13 8.9 mm max. (3 pos.) Miniature Waterproof Shielded Connectors LF Series Fig. 1 ■Features 1. Ease of shielded termination and connector assembly All components are self-aligning and do not require complex assembly tooling. The shield of the cable is connected with the metal housing of the connector using simple shielding clamp, supplied with the connector. (Fig. 2) 2. Water and dust protected The LF series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67 : Left in water at a depth of 1 m for 30 minutes IP68 : Left in water at a depth of 2 m for 14 days 3. Simplified assembly procedure No use of screws makes wiring and mounting easier. 4. Bayonet lock Short turn bayonet lock assures secure vibration resistant mating of the connectors. (Fig. 3) 5. Acquired safety standard 4 pos. is 10A and meets safety standards (TÜV) Also 3- and 4-pos. have acquired the UL standard. 6. High current rating capacity Mated dimensions (Example : LF07) No. of contacts 6, 12 and 20 Current rating 5A max. 10A max. 2A max. 10A max. 2A max. Built-in shield connection spring Cable shielding connection clamp Cable Shielding Connection - Plug Fig. 2 Mating: Insert the plug, and then turn the locking collar clockwise, as indicated by the coupling direction marking. Mating: Insert the plug, and then turn the locking collar clockwise, as indicated by the coupling direction marking. PlugPlug Locking collarLocking collar ReceptacleReceptacle Un-mating: Turn the locking collar counter-clockwise then pull off the plug. Coupling direction markingCoupling direction marking Coupling direction markingCoupling direction marking Short turn bayonet lock Fig. 3 In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.

LF Series●Miniature Waterproof Shielded Connectors Series name : LF Shell size 07 Waterproof W : Waterproof type Lock Mechanism B : Bayonet lock Connector type P : Plug R : Receptacle J : Jack (* : Form change zoning symbols in an identical class) ■Product Specifi cations Ratings Voltage rating 125V AC, 175V DC (3 pos.) 125V AC, 125V DC (4 pos.) 30V AC, 42V DC (6 pos. , 12pos. , 20pos.) 125V AC, 125V DC (11 pos. A to D) 30V AC, 42V DC (11 pos. 1 to 7) Current rating 5A max. (3 pos.) 10A max. (4 pos.) 2A max. (6 pos. , 12pos. , 20pos.) 10A(11 pos. A to D), 2A(11 pos. 1 to 7) Operating temperature range –25ç to +85ç Storage temperature range –10ç to +60ç Item Specifi cations Conditions 1.Contact resistance 15mø max. (3, 6, 12, 20 pos.) 5mø max. (4 pos.) 5mø max. (A to D), 15mø max. (1 to 7)(11 pos.) 1A DC 2.Insulation resistance 1000Mø min. 500V DC (3, 4 pos.) 100V DC (6, 12, 20 pos.) 500V DC (A to D), 100V DC (1 to 7)(11pos.) 3.Withstanding voltage No fl ashover or insulation breakdown. 1250V AC/1 minute (3, 4 pos.) 300V AC/1 minute (6, 12, 20 pos.) 1250V AC(A to D),300V AC(1 to 7) / 1 minute(11pos.) 4.Vibration No electrical discontinuity for 10µs max. 10 ˠ 55 ˠ 10Hz /cycle, single amplitude of 0.75mm 5 minutes / cycle, three directions, 10 cycles for each direction. 5.Shock No electrical discontinuity for 10µs max Acceleration of 490m/s , duration of 11ms, three directions, three times for each direction. 6.Durability6. ɹ(Mating/un-mating) 30mø max. (3, 6, 12, 20 pos.) 10mø max. (4 pos.) 10mø max.(A to D), 30mø max.(1 to 7)(11pos.) 1000 cycles 7.Temperature cycle Insulation resistance : 100Mø min. Temperature : -55ç ˠ Room temperature ˠ +85ç ˠ Room temperature Time : 30 ˠ 2 to 3 ˠ 30 ˠ 2 to 3 (minutes) 5 cycles 8.Humidity Insulation resistance : 10Mø min. (at high humidity condition) Insulation resistance : 100Mø min. (at dry condition) 96 hours at temperature of 40ç and humidity of 90% to 95%. 9.Water / dust protection When mated with corresponding connector. Complete dust protection. No water penetration when submerged for 48 hours at the depth of 1.8 meter. ■Materials / Finish Components Material Finish / Color Remarks Body / back shell Zinc alloy Nickel plated –––––––––– Insulator PPS Black UL94V-0 Contacts Copper alloy Selective Gold plated –––––––––– Tightening collar PPS Brown UL94V-0 ■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. LF 07 - WB P * - 6S (**) No. of contacts : 3, 4, 6, 11, 12, 20 Contact type P : Male contact S : Female contact Other specifications : A two-digit character is added to indicate other specifications as needed. 2 7 1 6

LF Series●Miniature Waterproof Shielded Connectors ■Plugs ØA B ØC (Cable dia.) ØA B ØC(Cable dia.)

• Lock ease type Unit : mm (Representative example.) (Representative example.) Unit : mm Part No. HRS No. No. of contacts ØA B ØCØC Weight LF07WBPD-6S(31) LF10WBPD-4S(31) LF10WBPD-4P(31) LF10WBPD-12S(31) LF10WBPD-12P(31) 136-0020-6 31 136-0014-3 31 136-0017-1 31 136-0015-6 31 136-0018-4 31 16.8 41.8 7.3 19g Part No. HRS No. No. of contacts ØA B ØC Weight LF07WBP-3S(31) LF07WBP-3P(31) LF07WBP-6S(31) LF07WBP-6P(31) LF10WBP-4S(31) LF10WBP-4P(31) LF10WBP-12S(31) LF10WBP-12P(31) LF13WBP-20S LF13WBP-20P LF13WBP-11S LF13WBP-11P 136-0003-7 31 136-0004-0 31 136-0001-1 31 136-0002-4 31 136-0005-2 31 136-0006-5 31 136-0007-8 31 136-0008-0 31 136-0009-3 136-0010-2 136-0011-5 136-0012-8 12.3 14.8 17.9 35.8 41.8 51.9 7.3 8.7 11g 17g 16g 29g 6 14.3 35.8 5 12g

LF Series●Miniature Waterproof Shielded Connectors E ØA ØB D C F(HEX) ■Receptacles

• Front panel mount typeɾSolder Type Unit : mm Part No. HRS No. No. of contacts ØA ØB ØCC D E Weight LF07WBR-3P LF07WBR-3S LF07WBR-6P LF07WBR-6S LF10WBR-4P LF10WBR-4S LF10WBR-12P LF10WBR-12S LF13WBR-20P LF13WBR-20S LF13WBR-11P LF13WBR-11S 136-1003-2 136-1004-5 136-1001-7 136-1002-0 136-1005-8 136-1006-0 136-1007-3 136-1008-6 136-1009-9 136-1010-8 136-1011-0 136-1012-3 10.3 12.8 15.9 15.3 18.3 7.75 16.55 15.05 15.25 19.05 17.25 17.25 19.05 7.65 7.75 1M9∞0.75 M11∞0.75 M14∞0.75 10g 10g F (Representative example.) (Representative example.)
• Front panel mount typeɾThrough hole Type ØA ØB D E F(HEX) Unit : mm Part No. HRS No. No. of contacts ØA ØB C D E F Weight

LF Series●Miniature Waterproof Shielded Connectors

• Rear panel mount type ɾ Through hole Type ØA C E ØB Unit : mm ØA C E D(HEX) ØB ■Receptacles
• Rear panel mount typeɾSolder Type ■Jacks ØA ØB C ØD (Cable dia.) Unit : mm (Representative example.) (Representative example.) (Representative example.) Part No. HRS No. No. of contacts ØA ØB C D E Weight LF10WBRB-12PD 136-1015-1 12 12.8 18.3 17.5 17 M14∞0.75 9gLF10WBRB-12SD 136-1016-4 Unit : mm Part No. HRS No. No. of contacts ØA ØB C D E Weight LF10WBRB-4P 136-1118-4 4 12.8 18.3 19.05 17 M14∞0.75 10gLF10WBRB-12P 136-1013-6 12 17.25LF10WBRB-12S 136-1014-9 LF13WBRB-20S 136-1018-0 20 15.9 21.5 19.25 20 M17∞0.75 16gLF13WBRB-11S 136-1019-2 11 Part No. HRS No. No. of contacts ØA ØB C ØD Weight LF07WBJ-3P 136-2003-8 3 10.3 11.5 36.3 5 11gLF07WBJ-3S 136-2004-0 LF07WBJ-6P 136-2001-2 6LF07WBJ-6S 136-2002-5 LF10WBJ-4P 136-2005-3 4 12.8 13.8 42.4 7.3 16gLF10WBJ-4S 136-2006-6 LF10WBJ-12P 136-2007-9 12LF10WBJ-12S 136-2008-1 LF13WBJ-20P 136-2009-4 20 15.9 16.9 52.4 8.7 29g LF13WBJ-20S 136-2010-3 30g LF13WBJ-11P 136-2011-6 11 29g LF13WBJ-11S 136-2012-9 30g D(HEX)

LF Series●Miniature Waterproof Shielded Connectors ■CAP

• For Receptacles B ØA Unit : mm (Representative example.) Part No. HRS No. Applicable connector ØA B Weight LF07WBR-C 136-3008-7 LF07WBR-6P 12.3 8.8 LF07WBR-6S LF07WBR-3P LF07WBR-3S LF10WBR-C 136-3001-8 LF10WBR-4P 14.8 5g LF10WBR-4S LF10WBR-12P LF10WBR-12S LF10WBRB-4P LF10WBRB-12P LF10WBRB-12S LF10WBRB-12PD LF10WBRB-12SD LF13WBR-C 136-3003-3 LF13WBR-20P 17.9 7g LF13WBR-20S LF13WBR-11P LF13WBR-11S LF13WBR-20SD LF13WBRB-20S LF13WBRB-11S

LF Series●Miniature Waterproof Shielded Connectors BContact position arrangement and specifications Note 1 : The contact configuration as viewed from the female contact connector mating side. Note 2 : The ▼ symbol indicates polarizing key position. Note 3 : Withstanding voltages are test voltage values. A+0.05 0Alignment guide B+0.05 BPanel Cutout Unit : mm 6 1 456 1112 A B 5 6 1 3 D C 32 876 9 10 4 5 1716 131211 14 15 18 19 BSolder termination fixture Note : It is applicable regard less of given alphabets or Numbers shown at *. HRS No.Part No. Applicable connectors 150-0232-0 150-0233-3 150-0235-9 150-0236-1 150-0237-4 150-0238-7 LF07BP-T01 LF07BJ-T01 LF10BP-T01 LF10BJ-T01 LF13BP-T01 LF13BJ-T01 LF07WBP- LF07WBJ- LF10WBP- LF10WBJ- LF13WBP- LF13WBJ- (Representative example.) (Representative example.) BApplicable tools Part No.Description HRS No. LF series Applicable cable dia. HR10A-TC-02 LF-TC-01 Manual cable clamp crimp Note : Applicable cable dia. is only 5mm for LF series. 150-0041-2 150-0234-6 5 (Note) 7.3 · 8.7 Unit : mm (Representative example.) Shell size LF07 LF10 LF13 Contact arrangement No. of contacts 3 6 4 12 11 20 Withstanding voltage 1250V AC 300V AC 1250V AC 300V AC 47 AC300VAC1250V AC300V Current rating 5A 2A 10A 2A 47 2A10A 2A Insulation resistance 1000Mø Contact resistance 15mø 5mø 15mø 47 15mø5mø 15mø Shell size A B Weight LF07WBR- Ø9.05 8.1 0.7 to 2 LF10WBR- Ø11.05 10.2 LF13WBR- Ø14.05 13.1LF10WBRB- LF13WBRB-** Ø17.05 16.1 0.7 to 4.8

LF Series●Miniature Waterproof Shielded Connectors ⿆Termination and Assembly Instructions 2 2 Thread the tightening collar, strain relief collar, seal bushing and the backshell over the cable as illustrated. No. Illustration Operation Solder termination fixture

1 Plug 1

Solder termination fixture Jack Insertion direction Body / insulator assembly Backshell Jack Disassembly Insert the plug into securely held solder termination fixture as shown. Loosen the backshell turning it counter clockwise and remove it from the body/ insulator assembly. Insert the jack into the securely held solder termination fixture as shown. Loosen the backshell turning it counterclockwise. Notes Connector Assembly (1) (2) (3) Backshell Threaded section Tightening collar Threaded section

1 Apply a coating of Loctite 7649

(Manufactured by Henkel Japan, Ltd,) primer to the threaded sections of the backshell and the tightening collar. Completely dry the coated surfaces. Drying time at room temperature is approximately 30 to 70 seconds. Ensure sufficient ventilation of the area at time of drying. Take necessary steps to protect the coated surfaces from contamination. Fixture Part No. Applicable connector LF07BP-T01 LF07WBP-6S,6P,3S,3P LF10BP-T01 LF13BP-T01 LF10WBP-4S,4P,12S,12P LF13WBP-20S,20P,11S,11P Fixture Part No. Applicable connector LF07BJ-T01 LF07WBJ-6S,6P,3S,3P LF10BJ-T01 LF13BJ-T01 LF10WBJ-4S,4P,12S,12P LF13WBJ-20S,20P,11S,11P Tightening collar Strain relief collarBackshell Gasket CableCable preparation end Note Threading the components may not be possible after the cable-end finishing process. Note When removing, assembling and wiring, be sure to use a solder termination fixture. Directly fixing the locking collar in place with a vice etc.. could lead to damage, deformation or lacuna of retaining ring. Note When removing, assembling and wiring, be sure to use a solder termination fixture. Directly fixing the body in place with a vice etc.. could lead to damage or deformation. Retaining ringA Detail view Note Vice fixed ban Note Vice fixed ban AVice Vice Vice Vice The connectors are delivered with pre-assembed condition and the disassembly as shown No.1.

Table 2. Stripping Dimensions shielding mesh or cable’s outer jacket. conduction, and waterproof performance. Table 1. Stripping Dimensions

4 Soldering

1 Soldering conditions

Soldering time: within 5 sec. sufficiently melted on the soldering iron tip. between the conductor and the contact. 1.1 mm min.) over every other wire. tubing should touch the insulator as shown.

outer jacket as illustrated. assure correct assembly of the backshell. Table 4. Wire Dimensions mesh does not protrude from under it. copper tape as shown on the illustration. should overlap itself by 2mm max.

LF Series●Miniature Waterproof Shielded Connectors No. Note It is critical that the protrusions are inside the corresponding grooves. It may cause breakage, when a tightening collar is assembled. Forming cavity Crimping tool 5.3 7.0 Connector Assembly12, BackshellThreaded section Wrench width : D 34, Tightening collar Groove Protrusion Strain relief collar Gasket Tightening collar Threaded section Both sides of the shielding clamp must be placed in the forming cavity of the tool (as shown on the illustration) and crimped over the cable by closing the tool completely.

1 Place the body/insulator assembly in the

applicable solder termination fixture. Slide forward the gasket and insert it in the backshell until fully seated. Verify that the Locktite 7649 primer (or equivalent) on the threaded sections of the backshell and tightening collar are dry. Apply the Locktite 263 compound to the tightening collar’s threaded section and attach it to the backshell. Slide forward the strain relief collar and insert it in the backshell, making sure that the opposing protrusions fit inside the corresponding grooves, as shown on the illustration.

2 Coat the thread section of the body/insulator

assembly with Loctite 263 compound (manufactured by Henkel Japan, Ltd.) or equivalent, tightening it with a torque specified in the table 6. Illustration Operation Crimping tool Forming cavity Applicable cable diameter Shielding clamp diameter after crimping HR10A-TC-02 5.3 5mm ––– 7.3mm 8.7mm 5.3mm to 5.5mm ––– 7.9mm to 8.1mm 9.1mm to 9.3mm 7.0 LF-TC-01 7.9 9.1 Shell size Tightening torque Wrench width LF07 LF10 10mm1N·m to 1.5N·m 1N·m to 1.5N·m 13mm LF13 1.5N·m to 2N·m 16mm Table 6 (Recommend tightening torgue) Fixture Part No. Applicable connector Fixture Part No. Applicable connector LF07BP-T01 LF10BP-T01 LF13BP-T01 LF07WBP-6S,6P,3S,3P LF10WBP-4S,4P,12S,12P LF13WBP-20S,20P,11S,11P LF07BJ-T01 LF10BJ-T01 LF13BJ-T01 LF07WBJ-6S,6P,3S,3P LF10WBJ-4S,4P,12S,12P LF13WBJ-20S,20P,11S,11P Locktite area Wiring side 1 to 2 threaded portion Body/insulator assembly Notes (1) (2) The applied loctite should not protrude out further than the wiring side 1 to 2 threaded section. If it does, it may affect waterproof performance and locking. Please remove any protruding loctite with a cloth or cotton swab. etc. It is critical that the cable itself will not turn or twist during this operation. It may cause breakage at the soldered area. For plug assembly For jack assembly

LF Series●Miniature Waterproof Shielded Connectors No. 6 66 Remove the connector from the solder termination fixture, holding it by the locking collar. Do not pull on the cable. It may cause breakage.7 After connector assembly procedure is completed, compress air in to the connector from the mating side under 17.6 kPa for 30 seconds check that no air leaks out of the connector. Tightening collar Illustration Operation Shell size Tightening torqueWrench width LF07 LF10 LF13 10mm0.8N·m to 1N·m 0.7N·m to 1N·m 1 N·m to 1.5 N·m 14mm 16mm Wrench width Recommended tightening torgue Confirmation of Waterproof Performance Remarks : The cable satisfies required specifications for UL specification. Notes : The cable pull and twisting strength, waterproof tightness and other characteristics may differ, depending on the cable structure, please confirm before the use. ⿆Cable Specifications (Reference) The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com Conductor Material Tin plated soft copper wire Size (AWG) 20 AWG 16 AWG 26 AWG 26 AWG 26 AWG 16 AWG 26 AWG Shield Material Tin plated soft copper wire Density 85% 80% or more 85% 80% or more 80% or more 80% or more Jacket Diameter (mm) Powered by TCPDF (www.tcpdf.org)