LDVDSV2-1587 ADVANTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

All product specifications are subject to change without notice. www.advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 orders@advantech-bb.com support@advantech-bb.com

ORDERING INFORMATION

MODEL NO. DESCRIPTION BB-LDVDSV2-1587 OBDII Data Streamer/Converter BB-QCLDVDSV2-KIT Bundled Kit, includes: Model LDVSV2-1587 Streamer/Converter, Y cable, host cable, installation kit ACCESSORIES / REPLACEMENT PARTS BB-LDVYCBL - Y Cable, 61 cm (24 in) length BB-45-JB723 - Host Cable BB-65-J9545-1 - Installation Kit, includes: 4 tie wraps, 1 alcohol wipe pad, 2 mounting tape strips Advanced OBDII Data Streamer Models LDVDSV2-1587 & QCLDVSV2-KIT + Outputs OBDII data in J1708 data format + Ignition-On signal output + Status LEDs for vehicle connection and power + Automatic low power mode senses when vehicle speed and engine speed is zero + Automatic disconnect when technician scan tool is connected (requires separate OBDII Y-cable) + Proprietary vehicle detection algorithm and embedded database permits same hardware to work on all compliant vehicles + Wide Operating Temperature: -40 to 85 ºC (-40 to 185 ºF) + Low Power Consumption: 2W in Operating Mode; 0.15W in Automatic Sleep Mode (Key Off) Model LDVDSV2-1587, OBDII Data Streamer, connects your PC, driver terminal, Java-enabled phone, or other on-board computing device to the OBDII diagnostic bus of light-duty and medium-duty vehicles. It enables the retrieval of the most commonly used parameters of value in telematics and fleet management applications. The OBDII Streamer supports any 1996 or newer vehicles that comply with the SAE’s J1979 OBDII specification. Model LDVDSV2-1587 provides a simple operational protocol to communicate to the OBDII bus. It provides a common interface and deterministic response time for all vehicles. The complete Command and Response Protocol is available on the company website. Model QCLDVDSV2-KIT conveniently bundles the converter with accompanying cables and an installation kit. PROTOCOLS & PARAMETERS SUPPORTED PROTOCOLS SAE J1850 VPW SAE J1850 PWM SAE J2284/ISO 15765 (CAN) ISO 9141-2 ISO 14230-4 (KWP2000) SUPPORTED PARAMETERS Vehicle Identification Number Vehicle Speed - monitor aggressive driving Engine Speed - monitor idle time and engine abuse Throttle Position Odometer/Distance Traveled - monitor trip distance and HOS Instantaneous Fuel Rate in Gallons per Hour Total Fuel - Monitor MPG & protect against theft Ignition status – track idle time Battery Voltage – watch for charging system failures PTO Status - automatically figure fuel tax savings Diagnostic Trouble Codes MIL Status Emissions Readiness Monitors - check remotely if vehicles are ready for emissions certification Brake Switch Status and Seatbelt Fastened - available on most Ford & GM trucks and vans Other parameters available on a custom basis LDVDSV2_QCLDVSV2-KIT_0118ds

Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 orders@advantech-bb.com support@advantech-bb.com SPECIFICATIONS LED STATE DESCRIPTIONS - On (LED_ON): lit, solid - Off (LED_OFF): unlit - FB (LED_FAST): Alternating on-off; 125ms on, 125ms off - SB (LED_SLOW): Alternating on-off; .5 sec on, 0.5 sec off - VSB (LED_VERY_SLOW): Alternating on-off; 0.25 sec on, 2 sec off Advanced OBDII Data Streamer Models LDVDSV2-1587 & QCLDVSV2-KIT LEDS Red LED (Power) Green LED (Activity) Red LED (Debug) Actual State Description

1 On On Off Normal operation Normal operation

2 On SB Off Detecting vehicle Detecting vehicle

3 Off FB Off Database version mismatch Database needs to be updated

4 Off SB Off Update in progress Update in progress

5 Off VSB VSB Device asleep Device asleep

6 Off Off Off Device unpowered Device unpowered

7 Off On FB Error FPGA image invalid Firmware needs to be updated

8 Off Off FB Error with EMM code Update system manager

9 Off Off FB EMM checking CRC of images Wait 10 seconds. If state does not change, see #8. 10 Off SB FB Error writing/reading to/from flash during update. Restart update of current component. VEHICLE BUS CONNECTION - DB15 FEMALE Pin 1 ISO9141 K/ Pins 4, 5 J1850-, J1850+ Pins 6, 7 Ground Pin 9 Vehicle unswitched Vbat Pin 10 ISO9141L Pin 11 Vehicle Vbat to external scan tool Pin 12 CAN Low Pin 13 CAN High RS-232 CONNECTION - DB9 FEMALE (DCE) Pin 1 Optional Vbat Power In or Vbat Power Out (2 separate build options) Pin 3 J1708- Pin 7 Ground Pin 8 J1708+ ADDITIONAL SPECIFICATIONS Operating Voltage Range 8 to 30 VDC MTBF, Calculated 111440 Hours APPROVALS, DIERECTIVES, STANDARDS EMC TESTING Radiated Interference SAE J1113/41 Load Dump and Transient Protection SAE J1113/11 ESD Immunity SAE J113/13 ENVIRONMENTAL TESTING Temperature Test Ten (10) temperature cycles as follows, with unit operating normally: 1. Room (25ºC) to Tmin in 15 minutes. 2. Soak at Tmin 1 Hour with power removed from unit 3. Start unit at Tmin, confirm successful start by executing a command/response. Power-down unit. Maintain unit un- powered for one minute between power-ups. 4. Repeat Step 3 three times 5. Start unit at Tmin and ramp Tmin to Tmax in 30 minutes 6. Operate at Tmax for 1 hour 7. Ramp Tmax to Tmin in 15 minutes 8. Repeat steps 1 through 7 nine times for a total of 10 cycles: a. 5 cycles at Vmin input b. 5 cycles at Vmax input Vibration Test: IEC 60068-2-6 10 sweeps of 10 to 500 to 10Hz at rate 0.5 oct/min. each axis. Level to be 10 to 36Hz, 0.06 in DA 36 to 500Hz, 4g’s Unit must remain operational during and after the test. Shock Test: IEC 60068-2-27 18 to 50g’s, 11ms, ½ sine pulses, 3 each direction each axis Unit must remain operational during and after the test. Drop Test: IEC 60068-2-32 10 Freefall drops from 1 meter onto concrete surface. Drop 1 time one each face (6), 1 on a corner and the 3 edges of this corner. The drop unit shall return to normal operation without physical damage. QCLDVDSV2-KIT