LDPQ-132-33 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • small size 1008(2.5 x 2.0 mm)
  • temperature stable
  • LTCC construction

Applications

  • communication systems
  • GSM
  • GPS
  • IoT LDPQ-132-33+ Outline Dimensions ( )inch mm Outline Drawing REV. OR ECO-001769 LDPQ-132-33+ AVB/CP/AM 200323 Electrical Specifications1,2 at 25°C Typical Performance Data at 25°C CASE STYLE: NL1008C-4 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Parameter Port Frequency (MHz) Min. Typ. Max. Unit Pass Band Insertion Loss Low Pass DC - 1280 — 1 2.2 dBHigh Pass 1550 - 3000 — 1.5 2.2 Return Loss Common DC - 3000 — 15 — dB Stop Band Isolation High Pass DC - 1240 10 15 — dB Low Pass 1620 - 3000 11 15 — dB Functional Schematic Demo Board MCL P/N: TB-985+ Suggested PCB Layout (PL-646) * passband rating, derate linearly to 1W at 105°C ambient. Permanent damage may occur if any of these limits are exceeded. A B C D E F G H J K wt .020 .012 .016 .095 grams 1 In Application where DC voltage is present at either input or output port, coupling capacitors are required.

2 Measured on Mini-Circuits Characterization Test Board TB-985+ with auto port extension

7” 20, 50, 100, 200, 500,1000, 4000 Generic photo used for illustration purposes only Outline Dimensions PCB Land Pattern Suggested Layout, Tolerance to be within □.002

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 2 of 2 LDPQ-132-33+Performance Charts 0 600 1200 1800 2400 3000 INSERTION LOSS (dB) FREQUENCY (MHz) LDPQ-132-33+ LOW FREQUENCY PORT INSERTION LOSS (Pin=0dBm) 0 600 1200 1800 2400 3000 RETURN LOSS (dB) FREQUENCY (MHz) LDPQ-132-33+ COMMON PORT RETURN LOSS (Pin=0 dBm) 0 600 1200 1800 2400 3000 RETURN LOSS (dB) FREQUENCY (MHz) LDPQ-132-33+ HIGH FREQUENCY PORT RETURN LOSS (Pin=0dBm) 0 600 1200 1800 2400 3000 INSERTION LOSS (dB) FREQUENCY (MHz) LDPQ-132-33+ HIGH FREQUENCY PORT INSERTION LOSS (Pin=0dBm) 0 600 1200 1800 2400 3000 RETURN LOSS (dB) FREQUENCY (MHz) LDPQ-132-33+ LOW FREQUENCY PORT RETURN LOSS (Pin=0dBm)

Ceramic Diplexer LDPQ-132-33+ Typical Performance Data (MHz) Low Pass port High Pass port Common port Low Pass port High Pass port (dB) (dB) FREQUENCY INSERTION LOSS RETURN LOSS REV. OR LDPQ-132-33+ 5/6/2020 Page 1 of 1

Ceramic Diplexer LDPQ-132-33+ Typical Performance Curves 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 Insertion Loss (dB) Frequency (MHz) Low Pass Port Insertion Loss 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 Return Loss (dB) Frequency (MHz) Low Pass Port Return Loss 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 Insertion Loss (dB) Frequency (MHz) High Pass Port Insertion Loss 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 Return Loss (dB) Frequency (MHz) High Pass Port Return Loss 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 Return Loss (dB) Frequency (MHz) Common Port Return Loss REV. OR LDPQ-132-33+ 5/6/2020 Page 1 of 1

NL1008C-4 Rev.: C (05/01/19) M174052 File: NL1008C-4 Sheet 1 of 1 This document and its contents are the property of Mini-Circuits. Case Style NL CASE # A B C D E F G H J K M WT. GRAM NL1008C-4 .098 (2.50) .079 (2.00) .039 (.99) .020 (.49) .010 (.25) .008 (.20) .020 (.49) .012 (.30) .016 (.41) .095 (2.41) -- .019 Notes: 1. Open style, ceramic base. 2. Termination finish: For RoHS Case Styles: Tin plate over Nickel plate. All models, (+) suffix. For RoHS-5 Case Styles: Tin-Lead plate. All models, no (+) suffix. 3. Line width should be designed to match 50 characteristic depending on PCB material and thickness. Outline Dimensions NL1008C-4 PCB Land Pattern Suggested Layout, Tolerance to be within .002

Environmental Specifications All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec ENV06T6 Operating Temperature -55° to 105°C Ambient Environment Individual Model Data Sheet Storage Temperature -55° to 105°C Ambient Environment Individual Model Data Sheet Humidity 90 to 95% RH, 240 hours, 50°C MIL-STD-202, Method 103, Condition A, Except 50°C and end-point electrical test done within 12 hours Solder Reflow Heat Sn-Pb Eutectic Process 225°C peak Pb-Free Process 245° - 250°C peak J-STD-020C, Table 4-1, 4-2 and 5-2, Figure 5-1 Solderability 10X Magnification J-STD-002, Para 4.2.5, Test S, 95% Coverage Vibration (High Frequency) 20g peak, 10-2000 Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-202, Method 204, Condition D Mechanical Shock 50g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-202, Method 213, Condition A This document and its contents are the property of Mini-Circuits. Rev:ENV06T6 OR 01/15/20 File:DCO-116 ENV06T6.pdf Page: 1