LDO10C ADVANCEDENERGY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
©2020 Advanced Energy Industries, Inc. ARTESYN LDO10C SERiES
50 Watts
Total Power: input Voltage: 3 - 13.8 Vdc # of Outputs: Single Data Sheet SPECiAL fEATuRES 10 A output current rating Input voltage range: 3 - 13.8 Vdc Adjustable output voltage: 0.59 - 5.1 V Excellent transient response Power enable (5-pin model) Minimum airflow Small package Termination voltage capability RoHS compliant SAfETY UL, cUL 60950-1 TÜV Product Service (EN60950) CE Advanced Energy's Artesyn LDO10C series non-isolated DC-DC converter is designed for cost- and space-sensitive applications. It has a wide 3–13.8 Vdc input range and offers a 0.59–5.1 Vdc adjustable output that accommodates a wide variety of silicon power needs. Capable of delivering up to 10 amps, the converter has a typical efficiency of 94%. A remote enable facility is provided as standard.
2 advancedenergy.com LDO10C ELECTRiCAL SPECifiCATiONS ENViRONmENTAL SPECifiCATiONS input Input voltage ra nge 3 - 13.8 Vdc Input current Minimum load Remote OFF 50 mA 5 mA Input current (max.) See Note 3 10 A @ lo max. Start-up time Power up Remote ON/OFF 3 ms 2 ms Output Output voltage See Note 5 0.59 - 5.1 V Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min./max. load 0 A/10 A Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. Ripple and noise
5 Hz to 20 MHz
Vin = 5 V, Vout = 2.5 V Transient response See Note 1, 2 130 mV max. deviation 15 μs recovery to within regulation band General Efficiency (high input) Vin = 5 V, Vo = 2.5 V, lo = 6 A 91% Switching frequency Fixed 620 kHz Material flammability UL94V-0 Weight 1.899 g (0.067 oz.) MTBF 12 V @ 40 °C, 100% load Bellcore 332 >8,222,210 hours Coplanarity Surface mount models 150 μm Thermal performance Operating ambient temperature -40 °C to +85 °C See Note 5 Non-operating ambient temperature -40 °C to +125 °C Protection Short-circuit Hiccup, non-latching Recommended System Capacitance input See Note 6 0 μF Output See Note 7 0 μF
advancedenergy.com 3 LDO10C
ORDERiNG iNfORmATiON
(3,5) Output Power (max.) input Voltage Output Voltage Output Current (min.) Output Current (max.) Efficiency (Typical) Regulation Line Load PART NumbER SYSTEm WiTH OPTiONS LDO 10 C 00 5W 05 V 1 J Product family Product family LDO = LDO Series Rated Output Current Rated Output Current 10 = 10 Amp Performance Performance C = Cost Optimized input Voltage input Voltage 00 = 3 - 13.8 V Number of Pins Type of Output Type of Output
5 W = 5 Pins and
05 = 0.59 - 5.1 V mounting Option mounting Option V = Vertical H = Horizontal S = SMT RoHS Compliance RoHS Compliance J = Pb free (RoHS 6/6 compliant) Custom Option Custom Option 1 = Vertical, 0.199” pin length OuTPuT VOLTAGE ADJuSTmENT Of THE LDO10C SERiES The ultra-wide output voltage trim range offers major advantages to users who select the LDO10C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.59 - 5.1 Vdc. When the LDO10C converter leaves the factory, the output has been adjusted to the default voltage of 0.59 V. Notes : 1. Measured as per recommended system capacitance. See Application Note 186. 2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo to full lo and full lo to 0.50. 3. External input fusing is recommended. 4. Additional part numbers may be available with different output voltages. 5. Airflow dependent, 100 LFM minimum required. 6. No capacitors needed for ripple current stability. 7. No capacitors needed for stability. 8. NOTICE: the input voltage must be greater than the programmed output voltage. The max duty cycle is 95%. These non-isolated dc-dc modules are buck converters. LD O10C Remote O N/O FF Vin G ND R trim (f or trim dow n) C in R L O A D Vout C out
4 advancedenergy.com LDO10C mECHANiCAL DRAWiNGS Vertical mount (model LDO10C-005W05-VJ) .071 .050 .410 .650 4X .067 TYP .160±.010 .030 .131 .34 REF.055 REF.062 MAX.460 .025 .001 SQ PINS TYP 5 1 Pin Assignments Pin No. Function
1 Enable
2 Vin
3 Common/RTN
4 Vout
5 Trim
.071 .050 .410 .650 TYP 4X .067 .199±.010 064. XAM .055 REF .062 REF .025 .001 SQ PINS TYP .131 .030 .34 Vertical mount (model LDO10C-005W05-V1J) Pin Assignments Pin No. Function
advancedenergy.com 5 LDO10C mECHANiCAL DRAWiNGS (CONTiNuED) Horizontal mount (model LDO10C-005W05-HJ) Pin Assignments Pin No. Function
6 Mech Pin
.071 .050 .410 .650 4X .067 TYP .160±.010 .030 .131 .34 REF.055 REF.062 MAX.460 .025 .001 SQ PINS TYP .071 TYP .050 .067 .650 .410 .035 .580 .545 MAX .125 TYP .055 REF REF.062 .120 TYP .025±.001 SQ PIN TYP
6 PLACES
.071 TYP .050 .067 .410 .035 .580 .545 MAX .125 TYP .055 REF REF.062 .120 TYP .025±.001 SQ PIN TYP
6 PLACES5 1
Surface mount (model LDO10C-005W05-SJ) Pin Assignments Pin No. Function
7 Mech Pin
0 (0.00) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) 0.050 (1.27) 0.360 (9.14) 0.410 (10.41) 0.650 (16.51) 0.035 (0.89) REF 0.062 (1.57) REF 0.040 (1.02) REF 0.52 (13.13) 0.055 (1.40) REF 0.125 (3.18) TYP 0.025 (0.64) REF 7 6 LDO10C- 005W05-
ENG-LDO10C-235-01 12.25 For international contact information, visit advancedenergy .com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 AbOuT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc.