LDE160-26 BEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
LDE160-26 is a wide range DIN rail switching power supply with output power up to 160 W offering unmatched flexibility for many applications. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes it market leader for various industrial applications. LDE160-26 is Class I isolation device suitable for SELV and PELV circuitry and is designed to be mounted on DIN rail and installed inside a protective enclosure.
- Single or two-phase AC input 187 - 528 VAC
- Latched overload and short-circuit protection
- Designed according to EN12015 and EN12016 for elevators use
- High efficiency
- Industrial Control
- Instrumentation Equipment
2 LDE160-26
tech.support@psbel.com LDE160-26 380 VAC (range 187 - 528 VAC) 26 VDC (Fixed) 6.0 A Specifications are measured at 25°C and 230 VAC, typical unless otherwise stated. Input AC Voltage Nominal – single or two phases Range
380 VAC
Input Frequency 47 - 63 Hz Input AC Rated Current Vin = 187 VAC Vin = 380 VAC Vin = 528 VAC 1.8 A 1.0 A 0.8 A Inrush Peak Current ≤ 30 A Touch (Leakage) Current ≤ 0.8 mA Internal Protection Fuse None, external fuse must be provided External Protection on AC Line It is strongly recommended to provide external surge arresters (SPD) according to local regulations. Fuse 4AT or MCB 6A C curve Output Power 160 W Output Voltage 26 VDC (Fixed) Continuous Current 6 A Overload Limit Latched protection Up to 10 A / 5 s Short Circuit Peak Current 25 A Load Regulation ≤ 1% Ripple & Noise1 ≤ 150 mVpp Hold up Time Vin = 230 VAC Vin = 480 VAC ≥ 20 ms ≥ 110 ms Output Overvoltage Protection ≥ 33 VDC Protections Overload and overvoltage latched off Thermal protection Output overvoltage Status Signals Green LED - DC OK Red LED - ALARM Parallel Connection Possible for redundancy (with external ORing module) Efficiency > 88% Dissipated Power < 25 W 1 Ripple and Noise are measured with 20 MHz bandwidth, probe terminated with a 0.1 μF MKP parallel capacitor.
+86 755 298 85888 Europe, Middle East +353 61 225 977 North America +1 408 785 5200 © 2017 Bel Power Solutions & Protection BCD.00850_AA Operating Temperature2 - 40°C to + 50°C Storage Temperature - 40°C to + 80°C Derating - 15 W/ºC over 45ºC Humidity Non-condensing 5 – 95% RH Life Time Expectancy At 25°C ambient, full load 77 726 h (8.8 years) Overvoltage Category Pollution Degree EN50178 IEC60664-1 III Safety Standards & Approvals UL508 (reference) EN60950 (reference) EN50178 (reference) EMC Standards Emission: EN55011 (CISPR11) EN55022 (CISPR22) EN12015 Class A Class A Class A Immunity: EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-11 EN12016 Level 3 Level 3 Level 3 Level 3 Level 2 Isolation Voltage Input to output Input to ground Output to ground 4.2 kVDC 2.2 kVDC 0.75 kVDC Protection Degree EN60529 IP20 Vibration Sinusoidal IEC 60068-2-6 (5-17.8Hz: ±1.6mm; 17.8-500Hz: 2g 2Hours / axis (X,Y,Z) Shock IEC 60068-2-27 (30g 6ms, 20g 11ms; 3 bumps / direction, 18 bumps total) Weight 0.5 kg Dimensions (W x H x D) 108.5 x 110.0 x 74.5 mm Connection Terminals Screw type (24 - 12 AWG) 2.5 mm² Case Material Aluminum IEC 60715/H15/TH35-7.5(-15) Mounting Rail Rail Mounting Information Vertical, allow 10mm spacing between adjacent items NOTES: Technical parameters are typical, measured in laboratory environment at 25ºC and 400 VAC / 50 Hz. Power rating, losses, efficiency, ripple, thermal behaviour and start-up may change outside of the nominal rated input range. Contact factory for details. 2 Start-up type tested: - 40°C, possible at nominal voltage with load derating.
4 LDE160-26
Figure 1. Mechanical Drawing equipment used in hazardous environments, or nuclear control systems. date manufactured. Specifications are subject to change without notice.