LD60 LIGHTGRAPHIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Page 1 of 5 | Data sheet issued: 8 April 2026 LD60 > Larger bezel to hide damage that might caused to the delicate surrounding surfaces when drilling hole cut-out > Can be specified with frosted glass for indicator applications, a wide beam works best for this effect > Machined from a solid billet of stainless steel 316 > No visible fixings. Fixing options include O-rings and a first fix sleeve or bonding directly into the mounting surface > Contains our integral moisture guard (anti-wicking barrier), stopping water ingress from going up the cable into the product from incorrect IP-rated connections > Not designed for permanent submersion, please use our LD242A > Available with Switch, 0-10V, DMX, Dali or Mains dimmable drivers KEY FEATURES DIMENSIONS For fixings and dimensions please go to page 3. Design: Brilliant Lighting Project: Private Residence Product: LD60 Ø28Ø28 Ø44Ø44 MINIATURE LED UPLIGHT AND WALL LIGHT LD60 With a slightly larger bezel than the LD41, the LD60 completely covers the first fix sleeve. This is a robust, versatile fitting with a 5mm thick glass and no visible fixings, available in a choice of colour temperatures. It can be run up to 1.7W, and comes with a range of beam angles making it suitable for a wide range of applications.
Page 2 of 5 | Data sheet issued: 8 April 2026 Data sheet issued: 8 April 2026 | Issue 1 WHITE LED ENGINE SPECIFICATION Engine C1 Beam angles 12°, 31°, 55°, 12° x 36° LED manufacturer NICHIA Colour temperature 2200K / 2700K / 3000K / 4000K / 5000K Current 350mA [1.2W] 500mA [1.7W] Typical LED Circuit wattage 1.1W 1.6W Delivered lumens (L100) * 108 141 Delivered lm/Circuit W** 99 88 Typical LED Source wattage 1W 1.5W Source LED lm 133 187 Source lm/W 136 129 Forward voltage (V100) 2.8V 2.9V CRI 93 Colour consistency 2 SCDM Peak intensity 869 LOR 0.75 TM30 RF93 | RG99 UGR rating (‘downlight’ mounted) 13.8 14.7 BUG rating (Sideways mounted) B0-U2-G1 BUG rating (‘uplight’ mounted) B0-U3-G0 LED lifetime L90B5 at 90,000hrs
Applications
This data is based on LD60-C1-500-LW27-NB LED wattage includes losses assocaited with using a 90% efficient driver Lumen output data applies to all colour temperatures. ENVIRONMENTAL TM65 Available on request TM66 2.7 Repair + Refurbish This product is included in our Repair and Refurbish scheme. This offers customers the ability to send back products to us for repair or refurbishment to extend their life without having to buy new fittings. RLE (REPLACEABLE LIGHT ENGINE) Visit page 4 for replacement parts 1 MECHANICAL 350mA 500mA Ambient temperature -20°C to 55°C -20°C to 55°C Glass 5mm thick borosilicate Materials Machine finish 316 stainless steel IP rating IP68 - Not for permanent submersion (for permanent submersion applications use LD242A) Wiring Comes pre-wired with 2 core 100mm lead, can be specified with up to 10m at extra cost
Page 3 of 5 | Data sheet issued: 8 April 2026 Data sheet issued: 8 April 2026 | Issue 1 AVAILABLE FINISHES Please refer to our finishes guide for full details
316 STAINLESS STEEL POLISHED & PASSIVATED
316 STAINLESS STEEL
Marine grade 316 Steel > Standard machined finish > Extremely durable with very high corrosion resistance > Passivation recommended for marine environments to prevent corrosion and build up of brown stains caused by oxidation > Interior & exterior use > Marine Grade 316 Steel > Mirror like finish > Extremely durable with very high corrosion resistance > Passivated to extensively prolong resistance to corrosion and brown stains caused by oxidation in marine environments > Interior & exterior use PAINT FINISH - WET SPRAY > White (RAL 9016), Black (RAL 9005), Antique Bronze, Satin Antique Brass, Satin Brass, Anthracite Grey (7016) or any RAL colour available > Not recommended for footlights in high traffic areas > Interior & exterior use > Solid Bronze > Hand finished Flamed Bronze unique to LightGraphix > Extremely durable with very high corrosion resistance. > Please note a natural dark patination layer will form after long term exposure to the elements, the extent of this discolouration will be dependant on its location. > Interior & exterior use Dimensions in mmDIMENSIONS & FIXING OPTIONS /SC Spring clip fixing Useful for most wall mounted applications /480GT Ground tube The in-ground tube has been designed for applications where a recessed uplighter is required in soil or gravel surfaces. The tube can be buried with the necessary wiring, and then the fitting installed after the landscaping work has been completed. It is supplied with the fixing sleeve bonded into the tube, and can be cut down on site. /480 O-rings and sleeve A more robust and water tight method of fixing, for wet areas Ø44 2.4 Ø28 Scaled Drawings. Use common elemtents, such as surfaces. But keep cables to scale. Reduce lines, simplify drawing. 2.4 Cut-Out Ø32 /SC Spring Clips Ø44 Ø28 2.4 Cut-Out Ø32 /480 Fixing Sleeve with ‘O’ rings Ø44 Ø44 Cut-out Ø32 Ø28 2.4 Ø44 2.4 Ø28 Scaled Drawings. Use common elemtents, such as surfaces. But keep cables to scale. Reduce lines, simplify drawing. 2.4 Cut-Out Ø32 /SC Spring Clips Ø44 Ø28 2.4 Cut-Out Ø32 /480 Fixing Sleeve with ‘O’ rings Ø44Ø44 Cut-out Ø32 2.4 Ø44 2.4 Ø28 Scaled Drawings. Use common elemtents, such as surfaces. But keep cables to scale. Reduce lines, simplify drawing. 2.4 Cut-Out Ø32 /SC Spring Clips Ø44 Ø28 2.4 Cut-Out Ø32 /480 Fixing Sleeve with ‘O’ rings Ø44 Ø52 Ø34 Ø81 /484GT In-ground Tube 25 25 25 Ø36.6 Ø50 Ø83.3 200 220 300 0.8 0.8 0.75 /476GT In-ground Tube /480GT In-ground Tube 0.8 200 Ø37
Page 4 of 5 | Data sheet issued: 8 April 2026 RLE - REPLACEABLE LIGHT ENGINESRLE - REPLACEABLE LIGHT ENGINES LD43DR RLE REPLACEMENT PARTS Please use the configurator below to specify your replacement engine and optic. If you are unsure of your original specifications, please check the label on your LightGraphix fitting, or get in touch with our sales team. Installation sheets will be supplied with the new components. RLE Engine LED Colour Beam Angle Accessories RLE 1 ENGINE RLE1/ Super Warm White (2200K) /LW22 Extra Warm White (2700K) /LW27 Warm White (3000K) /LW30 White (4000K) - on request /LW40 Cool White (5000K) /LW50 Narrow beam 16mm optic RLE/OP-16/NB O-ring RLE/OR2 Threaded back plate RLE/TBP What is RLE On the surface, RLE is LightGraphix’s answer to the Circular economy question that is facing many industries at the moment. However for us, RLE is an ethos; a commitment that LightGraphix will factor in the principles of good circular design into all of its future product design. It allows us to offer luminaires that contain replaceable, energy-efficient light engines. This gives customers the ability to refurbish existing lighting installations rather have having to replace the entire luminaire. This will fall into two types of refurbishments: replaceable, and repairable. RLE Engines Repairs can be conducted on any site worldwide, or in our factory, with a small tool. Simply swap out the singular modular LED insert, and replace it with another, along with a new optic, which are both supplied by us. The warranty provided with the product with vary based on who is performing RLE repairs. There are three types of RLE engine, categorised based on the size of the product. RLE1 is the smallest, with RLE3 being the largest. Threaded back plate RLE 1 ENGINE HeatsinkOptic LED O-ring RLE1/
ORDER CODES & OPTIONSORDER CODES & OPTIONS Example: LD60-C1-700/LW27/MB/316 Stainless Steel/480ORDER CODES & OPTIONSORDER CODES & OPTIONS Light Engine & Drive Current LED Colour Beam Angle FixingFinish / / // Data sheet issued: 8 April 2026 | Issue 1 1.2W LED at 350mA LD60-C1-350 1.7W LED at 500mA LD60-C1-500 Super Warm White (2200K) /LW22 Extra Warm White (2700K) /LW27 Warm White (3000K) /LW30 White (4000K) - on request /LW40 Cool White (5000K) /LW50 Blue /LB Green /LG Red /LR Amber /LA 12° Narrow /NB 31° Medium /MB 48° Wide /WB 12° x 36° Oval /OB Drivers Use with 350mA, 500mA & 700mA constant current LED drivers We have a wide range of LED drivers available. Please see the downloads section of our website. Polished & Passivated (for marine environments) Wet Spray Black (RAL 9005) Wet Spray Classic Bronze (YM262E) Wet Spray Gunmetal Grey (RAL 7021) Wet Spray White (RAL 9016) Wet Spray RAL /SC /480 /480GT Ambient temperature key: 55°C