LD30

LD30 LIGHTGRAPHIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

LightGraphix reserve the right to change specifications without notice Data sheet issued: 14 March 2025 LD30 High Power Linear Reflector LED System The ultra slim profile is the ideal lighting solution for display cases. The LEDs are mounted within a unique linear reflector system which creates a very even and focused beam with no spotting from lenses or loss of output from just using the LED itself. For its size this system packs a huge punch! LD30 offers great flexibility to the designer, with a range of options that suit most applications, details and project budgets. Key Features Specification Superb continuous lighting capabilities Multiple point sources create maximum sparkle High power for compact size 5 different mounting options Reflector focuses the light where it is needed LED spacing of 50, 75 and 100mm are available, allowing cost savings with fewer LEDs and drivers whilst still achieving the desired effect Custom made lengths as standard Available with Switched, 0-10V, DMX or Dali drivers

Applications

Beam Angles 82° LED type Cree XPG2 Colour temperature 2700K** / 3000K 5000K Drive Current (mA) 350 500 350 500 LED power* (W) 1.2W 1.7W 1.2W 1.7W CRI (typical) 93 93 75 75 Forward voltage (V) 100 3.0V 3.2V 3.0V 3.2V LED spacing Delivered lm/m (L 100) 50mm 2052 2800 2493 3402 75mm 1334 1820 1620 2211 100mm 1026 1400 1247 1701 Lumens per circuit watt* 86 82 104 100 LED lifetime (to 70% lumen maintenance) 50,000hrs at a max ambient temperature of 35 °C Materials Silver anodised aluminium body, Polycarbonate cover. Aluminium reflector and end caps. Wiring Comes pre-wired with 2m lead, can be specified with up to 10m at extra cost IP rating IP40 *LED wattage includes losses associated with using an 85% efficient driver 2700K lumen output is 12% lower than the 3000K figure listed 4000K lumen output is 14% higher than the 3000K figure listed (80 CRI) *Data shown allows for 50mm spacing /478 Fixing Sleeve with 'O' rings Ø50.5 Ø27.5 12.5 Recommended mounting details when using multiple lengths end to end to ensure a continuous wash of light Method 1 /478 Fixing Sleeve with 'O 'rings/479 Fixing Sleeve with 'O' rings Ø30.5 Ø27.5 30 40 Ø32Ø30 13.2 17.6 11.5 21.5 C128 Fixing clip is supplied as standard E2121 Aluminium U channel for LED lighttube with fixing clip 100° OAL 15 1520 OAL 15 1530 LD12LT and LD12LT/RGB LD12LT/ECO End allowance and LED spacing IP68 End allowance 3030 DIM 17.4 Ø15 21.5 METHOD 1 METHOD 2 METHOD 3 METHOD 4 METHOD 5 Ø29 Ø29 DIM Ø29 Ø29 DIM M8 M8 M8 14 14 DIM SUPPORT RODS MAX 400MM 14 14 DIM M8 M8 DIM 6 6 Ø29 DIM Ø30 DIM DIM 12.5 Ø29 Ø54 DIM Ø30 DIM DIM Ø54Ø29 A second rail can be added /CS Optional centre support for lengths over 1.2m Wardrobe M4 grub screw Method 1 M8 M8 Method 2 Mounting Methods DIM Ø29 DIM Ø29 DIM 14 14 MAX 400mm SUPPORT Method 3 Adjustable and lockable Method 5 DIM14 14 DIM6 6 Method 4 Ø29 82° Beam angle 82° Ø29 Project: Goldsmiths Product: LD26

LightGraphix reserve the right to change specifications without notice Data sheet issued: 14 March 2025 LD30 High Power Linear Reflector LED System /478 Fixing Sleeve with 'O' rings Ø50.5 Ø27.5 12.5 Recommended mounting details when using multiple lengths end to end to ensure a continuous wash of light Method 1 /478 Fixing Sleeve with 'O 'rings/479 Fixing Sleeve with 'O' rings Ø30.5 Ø27.5 30 40 Ø32Ø30 13.2 17.6 11.5 21.5 C128 Fixing clip is supplied as standard E2121 Aluminium U channel for LED lighttube with fixing clip 100° OAL 15 1520 OAL 15 1530 LD12LT and LD12LT/RGB LD12LT/ECO End allowance and LED spacing IP68 End allowance 3030 DIM 17.4 Ø15 21.5 METHOD 1 METHOD 2 METHOD 3 METHOD 4 METHOD 5 Ø29 Ø29 DIM Ø29 Ø29 DIM M8 M8 M8 14 14 DIM SUPPORT RODS MAX 400MM 14 14 DIM M8 M8 DIM 6 6 Ø29 DIM Ø30 DIM DIM 12.5 Ø29 Ø54 DIM Ø30 DIM DIM Ø54Ø29 A second rail can be added /CS Optional centre support for lengths over 1.2m Wardrobe M4 grub screw Method 1 M8 M8 Method 2 Mounting Methods DIM Ø29 DIM Ø29 DIM 14 14 MAX 400mm SUPPORT Method 3 Adjustable and lockable Method 5 DIM14 14 DIM6 6 Method 4 Ø29 82° Beam angle /478 Fixing Sleeve with 'O' rings Ø50.5 Ø27.5 12.5 Recommended mounting details when using multiple lengths end to end to ensure a continuous wash of light Method 1 /478 Fixing Sleeve with 'O 'rings/479 Fixing Sleeve with 'O' rings Ø30.5 Ø27.5 30 40 Ø32Ø30 13.2 17.6 11.5 21.5 C128 Fixing clip is supplied as standard E2121 Aluminium U channel for LED lighttube with fixing clip 100° OAL 15 1520 OAL 15 1530 LD12LT and LD12LT/RGB LD12LT/ECO End allowance and LED spacing IP68 End allowance 3030 DIM 17.4 Ø15 21.5 METHOD 1 METHOD 2 METHOD 3 METHOD 4 METHOD 5 Ø29 Ø29 DIM Ø29 Ø29 DIM M8 M8 M8 14 14 DIM SUPPORT RODS MAX 400MM 14 14 DIM M8 M8 DIM 6 6 Ø29 DIM Ø30 DIM DIM 12.5 Ø29 Ø54 DIM Ø30 DIM DIM Ø54Ø29 A second rail can be added /CS Optional centre support for lengths over 1.2m Wardrobe M4 grub screw Method 1 M8 M8 Method 2 Mounting Methods DIM Ø29 DIM Ø29 DIM 14 14 MAX 400mm SUPPORT Method 3 Adjustable and lockable Method 5 DIM14 14 DIM6 6 Method 4 Ø29 82° Beam angle /478 Fixing Sleeve with 'O' rings Ø50.5 Ø27.5 12.5 Recommended mounting details when using multiple lengths end to end to ensure a continuous wash of light Method 1 /478 Fixing Sleeve with 'O 'rings/479 Fixing Sleeve with 'O' rings Ø30.5 Ø27.5 30 40 Ø32Ø30 13.2 17.6 11.5 21.5 C128 Fixing clip is supplied as standard E2121 Aluminium U channel for LED lighttube with fixing clip 100° OAL 15 1520 OAL 15 1530 LD12LT and LD12LT/RGB LD12LT/ECO End allowance and LED spacing IP68 End allowance 3030 DIM 17.4 Ø15 21.5 METHOD 1 METHOD 2 METHOD 3 METHOD 4 METHOD 5 Ø29 Ø29 DIM Ø29 Ø29 DIM M8 M8 M8 14 14 DIM SUPPORT RODS MAX 400MM 14 14 DIM M8 M8 DIM 6 6 Ø29 DIM Ø30 DIM DIM 12.5 Ø29 Ø54 DIM Ø30 DIM DIM Ø54Ø29 A second rail can be added /CS Optional centre support for lengths over 1.2m Wardrobe M4 grub screw Method 1 M8 M8 Method 2 Mounting Methods DIM Ø29 DIM Ø29 DIM 14 14 MAX 400mm SUPPORT Method 3 Adjustable and lockable Method 5 DIM14 14 DIM6 6 Method 4 Ø29 82° Beam angle /478 Fixing Sleeve with 'O' rings Ø50.5 Ø27.5 12.5 Recommended mounting details when using multiple lengths end to end to ensure a continuous wash of light Method 1 /478 Fixing Sleeve with 'O 'rings/479 Fixing Sleeve with 'O' rings Ø30.5 Ø27.5 30 40 Ø32Ø30 13.2 17.6 11.5 21.5 C128 Fixing clip is supplied as standard E2121 Aluminium U channel for LED lighttube with fixing clip 100° OAL 15 1520 OAL 15 1530 LD12LT and LD12LT/RGB LD12LT/ECO End allowance and LED spacing IP68 End allowance 3030 DIM 17.4 Ø15 21.5 METHOD 1 METHOD 2 METHOD 3 METHOD 4 METHOD 5 Ø29 Ø29 DIM Ø29 Ø29 DIM M8 M8 M8 14 14 DIM SUPPORT RODS MAX 400MM 14 14 DIM M8 M8 DIM 6 6 Ø29 DIM Ø30 DIM DIM 12.5 Ø29 Ø54 DIM Ø30 DIM DIM Ø54Ø29 A second rail can be added /CS Optional centre support for lengths over 1.2m Wardrobe M4 grub screw Method 1 M8 M8 Method 2 Mounting Methods DIM Ø29 DIM Ø29 DIM 14 14 MAX 400mm SUPPORT Method 3 Adjustable and lockable Method 5 DIM14 14 DIM6 6 Method 4 Ø29 82° Beam angle /478 Fixing Sleeve with 'O' rings Ø50.5 Ø27.5 12.5 Recommended mounting details when using multiple lengths end to end to ensure a continuous wash of light Method 1 /478 Fixing Sleeve with 'O 'rings/479 Fixing Sleeve with 'O' rings Ø30.5 Ø27.5 30 40 Ø32Ø30 13.2 17.6 11.5 21.5 C128 Fixing clip is supplied as standard E2121 Aluminium U channel for LED lighttube with fixing clip 100° OAL 15 1520 OAL 15 1530 LD12LT and LD12LT/RGB LD12LT/ECO End allowance and LED spacing IP68 End allowance 3030 DIM 17.4 Ø15 21.5 METHOD 1 METHOD 2 METHOD 3 METHOD 4 METHOD 5 Ø29 Ø29 DIM Ø29 Ø29 DIM M8 M8 M8 14 14 DIM SUPPORT RODS MAX 400MM 14 14 DIM M8 M8 DIM 6 6 Ø29 DIM Ø30 DIM DIM 12.5 Ø29 Ø54 DIM Ø30 DIM DIM Ø54Ø29 A second rail can be added /CS Optional centre support for lengths over 1.2m Wardrobe M4 grub screw Method 1 M8 M8 Method 2 Mounting Methods DIM Ø29 DIM Ø29 DIM 14 14 MAX 400mm SUPPORT Method 3 Adjustable and lockable Method 5 DIM14 14 DIM6 6 Method 4 Ø29 82° Beam angle /478 Fixing Sleeve with 'O' rings Ø50.5 Ø27.5 12.5 Recommended mounting details when using multiple lengths end to end to ensure a continuous wash of light Method 1 /478 Fixing Sleeve with 'O 'rings/479 Fixing Sleeve with 'O' rings Ø30.5 Ø27.5 30 40 Ø32Ø30 13.2 17.6 11.5 21.5 C128 Fixing clip is supplied as standard E2121 Aluminium U channel for LED lighttube with fixing clip 100° OAL 15 1520 OAL 15 1530 LD12LT and LD12LT/RGB LD12LT/ECO End allowance and LED spacing IP68 End allowance 3030 DIM 17.4 Ø15 21.5 METHOD 1 METHOD 2 METHOD 3 METHOD 4 METHOD 5 Ø29 Ø29 DIM Ø29 Ø29 DIM M8 M8 M8 14 14 DIM SUPPORT RODS MAX 400MM 14 14 DIM M8 M8 DIM 6 6 Ø29 DIM Ø30 DIM DIM 12.5 Ø29 Ø54 DIM Ø30 DIM DIM Ø54Ø29 A second rail can be added /CS Optional centre support for lengths over 1.2m Wardrobe M4 grub screw Method 1 M8 M8 Method 2 Mounting Methods DIM Ø29 DIM Ø29 DIM 14 14 MAX 400mm SUPPORT Method 3 Adjustable and lockable Method 5 DIM14 14 DIM6 6 Method 4 Ø29 82° Beam angle /M1 Method 1 - Profile fixed from one end using M8 all-thread and nut. Cable exit through all-thread. Specify Dim (if longer than max length please contact us). /M2 Method 2 - Profile fixed from both ends using M8 all-thread and nut. Cable exit through all-thread and can be either end. Specify Dim (if longer than max length please contact us). /M3 Method 3 - Profile is mounted in a ‘goal post’ configuration. To direct the light output by 350 ° loosen M3 grub screws and rotate profile. Specify Dim (if longer than max length please contact us). /M4 Method 4 - Profile fixed from one end using M8 all-thread and nut. Cable exit through all-thread. Specify Dim (if longer than max length please contact us). /M5 Method 5 - Linear profile is fixed using spring fixing clips which are screwed to the surface, cables exit one or both ends. Specify Dim (if longer than max length please contact us). Mounting Options and Dimensions DIM (1000mm max) Ø29 Ø29 DIM (2500mm max) M8M8 DIM (2500mm max) 14 14 Support rods max 400mm 14 14 M8 M8 6 6 DIM (3000mm max) DIM (2500mm max)

LightGraphix reserve the right to change specifications without notice Data sheet issued: 14 March 2025 LED colour options Suffix Extra Warm White (2700K) /LW27 Warm White (3000K) /LW30 White (4000K) - on request /LW40 Cool White (5000K) /LW50 Finish options Silver anodised (standard) Paint finish white / black / RAL (only available with LD30-350) Mounting Method Method 1 /M1 Method 2 /M2 Method 3 /M3 Method 4 /M4 Method 5 /M5 Cover option Clear cover /CC Frosted cover /FD Product codes with output options 1.2W LED at 350mA LD30-350 1.7W LED at 500mA LD30-500 LED spacing 50mm /50 75mm /75 100mm /100 LD30 High Power Linear Reflector LED System Order Codes and Options Use with 350mA and 500mA constant current LED drivers We have a wide range of dimmable LED drivers, 0-10V, DMX, DALI and Mains dimmable. Please see the downloads section on our website. Photometric files are included in the design pack which can be downloaded from the LD30 product page on the website. Photometrics Example: LD30-350 / LW30 / 50 / CC / M1 / 1000mm / Silver anodised Product code LED colour Length (DIM) LED spacing Finish LD30 - 350 - 500 Cover option Mounting method Max ambient temp. @ 50mm spacing: 350mA - 45°C 500mA - 35°C Requires consideration in small, unventilated display cabinets. Thermals Project: Harrods Product: LD30