LD10-20B24A2 MORNSUN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice. LD10-20BXX A/3-2012 Page1 of 4 Approval Model Package Power Output (Vo1/Io1) Ripple and Noise (typ) Efficiency (%)(typ) Standby Power (typ) LD10-20B03 6.6W 3.3V/2000mA 70 0.4W LD10-20B05 5V/2000mA 74 0.4W LD10-20B09 9V/1100mA 76 0.45W LD10-20B12 12V/900mA 76 0.4W LD10-20B15 15V/700mA 78 0.5W UL/CE LD10-20B24 53.8X28.8X19.0mm 10W 24V/450mA 50mV 80 0.6W INPUT SPECIFICATIONS Input Voltage Range 85～264VAC, 120 ～370VDC Input Frequency 47～440Hz Input Current 110VAC 230mA, typ 230VAC 150mA, typ Inrush Current 110VAC 10A, typ 230VAC 20A, typ Leakage Current 0.1mA (typ)@ Vin=230Vac Recommended External Input Fuse (Special package series include fuse ) 2A/250V Slow-Blow OUTPUT SPECIFICATIONS Voltage set accuracy ±2% (3.3V: ±3%) Input variation ±0.5% (typ) Load variation (10% to 100%) ±1% (typ) Ripple& noise(p-p) 20MHz Bandwidth 50mV(typ) 100mV (max) Short circuit protection Continuous, and auto resume Over current protection ≥110% IO LD10-20B03 8000 LD10-20B05 8000 LD10-20B09 560 LD10-20B12 1200 LD10-20B15 1000 Maximum capacitive load (µF) LD10-20B24 200 LD10 SERIES 10W， AC-DC CONVERTER LD10 series ----is a compact size power converter offered by Mornsun. It features universal input voltage, taking both DC and AC input voltage, low power consumption, high efficiency, high reliability, safer isolation. It offers good EMC performance, meets IEC/EN61000-4, CISPR22/EN55022 ， UL60950 and EN60601 standards, and widely used in industrial, medical, electricity, instruments, telecommunication and civil applications. For harsh EMC environment, this series of products must use the refered application circuit. RoHS E235235 PRODUCT FEATURES 1. Universal input :85 ~ 264VAC/120～370VDC 2. AC and DC dual-use(input from the same terminal) 3. High efficiency, high power density 4.Output over voltage, short circuit and over temperature protection 5. Low ripple and noise 6. Low loss, green power 7. Meet UL60950 and EN60601 standards 8. Industrial, medical level specifications 9.Mounting: PCB mounting, Chassis mounting with Screw Terminals, DIN-Rail mounting PART NUMBER SYSTEM LD10-20B24A2 SELECTION GUIDE
The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice. LD10-20BXX A/3-2012 Page2 of 4 COMMON SPECIFICATIONS Operating -25℃～+70℃ (55°C～70℃) 2% / ℃ Power derating (-25℃～0°C) 2% / ℃ Storage -40℃～+105℃ Temperature ranges Case temperature +95 max℃ Hold-up time (Vin=230VAC) 50ms(typ) Humidity 95%(max) Temperature coefficient 0.02%/ ℃ Switching frequency 60kHz(typ) Isolation voltage( Input-Output ) 4000VAC/1Min CE CISPR22/EN55022 CLASS A(without external circuit) / CLASS B(with typical applications Figure 3) EMI RE CISPR22/EN55022 CLASS A(without external circuit) / CLASS B(with typical applications Figure 3) ESD IEC/EN 61000-4-2 Contact ±6KV /Air ±8KV perf. Criteria B RS IEC/EN 61000-4-3 10V/m perf. Criteria A IEC/EN 61000-4-4 ±2 KV (without external circuit) perf. Criteria B EFT IEC/EN 61000-4-4 ±4 KV (with typical applications Figure 3) perf. Criteria B IEC/EN 61000-4-5 ±1KV (without external circuit) perf. Criteria B Surge IEC/EN 61000-4-5 ±2KV/±4KV (with typical applications Figure 3) perf. Criteria B CS IEC/EN61000-4-6 10 Vr.m.s perf. Criteria A PFM IEC/EN61000-4-8 10A/m perf. Criteria A EMC EMS Voltage dips、short and interruptions immunity IEC/EN61000-4-11 0%-70% perf. Criteria B Safety standards IEC60601,EN60601,UL60950 Safety approvals EN60601,UL60950 Safety Class CLASSⅡ Case material UL94V-0 Install PCB mounting, Chassis mounting with Screw Terminals, DIN-Rail mounting MTBF >300,000H @25℃ Package PCB mounting Chassis mounting with Screw Terminals DIN-Rail mounting 53.8X28.8X19.0mm 96.1X54.0X27.5mm 96.1X54.0X32.1mm Weight 50g(PCB mounting) 100g(Chassis mounting with Screw Terminals) 140g(DIN-Rail mounting) Note: 1. Ripple and Noise were measured by the method of anear measure (more details refer to the anear measure). 2. Unless otherwise specified, all specifications above are measured at rated input voltage and rated output load, TA=25 °C, humidity < 75%. ANEAR MEASURE FUSE Copper sheet Connect Oscillograph Probe Load C1: 1µF (Ceramic capacitor) C2:10 µF (Electrolytic capacitor) TEMPERATURE VS LOAD INPUT VOLTAGE VS LOAD 100 0-10-25 55 70 Load(%) Temperature( C) 100 Input voltage (Vac) 100 24085 26470 Load(%) 340120 370 100 Load(%) Input voltage (Vdc)
The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice. LD10-20BXX A/3-2012 Page4 of 4 LD10XXA2 CHASSIS MOUNTING WITH SCREW TERMINALS Footprint Details Pin 1 2 3 4 5 6 7 8 Function NC AC(N) AC(L) +Vo NC -Vo NC NC 86.10 [3.390] 96.10 [3.783] 46.00 [1.811] 54.00 [2.126] Ф3.50 [0.138] 8.50 [0.335] 20.60 [0.811] 27.50 [1.083] ( ) TopView ( ) MainView Note: Unit: mm[inch] General tolerances: ±0.50mm[±0.020inch] LD10XXA4 DIN-RAIL MOUNTING Footprint Details Pin 1 2 3 4 5 6 7 8 Function NC AC(N) AC(L) +Vo NC -Vo NC NC 86.10 [3.390] 96.10 [3.783] 46.00 [1.811] 54.00 [2.126] 8.50 [0.335] 20.60 [0.811] 27.50 [1.083] 32.10 [1.264] ( )TopView ( )MainView Note: Unit: mm[inch] General tolerances: ±0.50mm[±0.020inch] PACKAGE DIAGRAM PCB mounting Series Special Package Series Inner packaging box dimensions: L*W*H=255*170*80mm Packaging quantity: 24pcs Outer packaging box dimensions: L*W*H=405*380*305mm Packaging quantity: 144pcs Inner packaging box dimensions: L*W*H=365*350*105mm Packaging quantity: 24pcs Outer packaging box dimensions: L*W*H=390*360*245mm Packaging quantity: 48pcs MORNSUN Science & Technology Co.,Ltd. Tel: 86-20-28203030 Fax:86-20-38601272 Http://www.mornsun-power.com