LCT43-E EMERSON-NETWORKPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Rev. 8.17.06 LCT43-E Series 1o f 3 Embedded Power for Business-Critical Continuity LCT43-E Series

47 Watts

  • Totally enclosed
  • Universal input
  • Quick Installation
  • Built-in EMI filter
  • Low output ripple
  • Overvoltage protection
  • O v e r l o a d p r o t e c t i o n Total Power: 47 Watts Input Voltage: 85 - 264 VAC 120 - 300VDC # of Outputs: Triple Electrical Specifications Safety Input Input range 85 - 264 VAC (wide range) 120 - 300VDC Frequency 47-63 Hz Inrush current <20A peak @ 115VAC, <40A peak @ 230VAC cold start @ 25°C Input current 1A max. (RMS) @ 115VAC Efficiency 70% typical at full load EMI filter FCC Class B conducted and radiated; CISPR 22 Class B conducted and radiated; EN55022 Class B conducted and radiated Bellcore GR-1089-core Class B conducted Safety ground leadage current <3.5 mA @ 50/60 Hz, 264 VAC input Output Maximum power 47W with 12CFM forced air Cross regulation ±2% on output 1; ±5% on outputs 2, 3 Hold-up time 10ms @ 47W load, 100VAC input Overload protection Short circuit protection on all outputs. Case overload protect- ed @ 110-135% above peak rating Overvoltage protection 5.50-6.75 VDC on main output VDE 0805/EN60950 21310-3336-0003 UL UL60950 E186249 CSA CSA 22.2-234 -950-95-M90 CB Certificate and report 6593 CE Mark (LVD) RoHS

Rev. 8.17.06 LCT43-E Series 2o f 3 Embedded Power for Business-Critical Continuity Operating temperature: 0° to 50°C ambient derate each out- put as 2.5% per degree from 50° to 70°C Storage temperature: -40°C to +85°C Temperature coefficient: ±.04% per °C Electromagnetic susceptibility: designed to meet IEC1000-4; Humidity: Operating; non-condensing 5% to 90% Vibration: .41G from 3 to 500Hz; Spectral break points of .0065 G2/Hz at 10 Hz and 200 Hz and 5 db/octave roll off at each end, 2 hours per axis MTBF demonstrated >300,000 hours at full load and 25°C ambient conditions Environmental Specifications

Ordering Information

P/P (PARD)3 LCT43-E +5V 1.0A 4A 7A 8A +4/-2% 50mV +12V 0.1A 1A 1.2A 1.5A ±5% 120mV -12V 0A 0.5A 0.5A 0.6A ±5% 120mV 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges.

Rev. 8.17.06 LCT43-E Series 3o f 3 Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2006 Emerson Electric Co. Embedded Power for Business-Critical Continuity Emerson Network Power. The global leader in enabling business-critical continuity. EmersonNetworkPower. com AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services Astec Power

5810 Van Allen Way

Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Technical Support: +1 888 41 ASTEC or +1 407 241 2752 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Units 2111-2116, Level 21 Tower 1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: +852 2437 9662 Facsimile: +852 2402 4426 For global contact, visit: www.astecpower.com technicalsupport@astec.com While every precaution has been taken to ensure accuracy and completeness in this literature, Astec Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Printed in U S A Pin Assignments CCoonnnneeccttoorr LLCCTT4433--EE SK1-1 AC Line SK1-2 Ground SK1-3 AC Neutral SK2-1 -12V SK2- 2 Com SK2- 3 +5V SK2-4 +5V SK2-5 Common SK2-6 +12V Mating Connectors AACC IInnppuutt:: IEC 320 DDCC OOuuttppuuttss:: Molex 15-48-0406 (USA) Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ±0.02" (±0.5mm) 3. Specifications are for convection rating at factory settings at 115VAC input 25ºC unless otherwise stated 4. Warranty: 1 year 5. Weight: 1.25lbs/0.57kg Mechanical Drawing