LCS CK-COMPONENTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

J Snap-acting J–26 Dimensions are shown: mm Specifications and dimensions subject to change www.ck-components.com LCS Series Subminiature Sealed Snap-acting Switches Features/Benefits

  • Compact design
  • Long life and high electrical capacity
  • Quick connect, solder terminals, PC terminals, wire leads
  • Wide variety of actuator styles
  • RoHS compatible, RoHS compliant
  • IP67 Typical Applications
  • Motorized equipment
  • Sump pump
  • Thermostatic controls
  • Computers
  • Air conditioners Specifications CONTACT RATING: 6 AMP , 250 V AC and

5 AMP , 125/250 V AC

0.1 AMP , 125/250 V AC

ELECTRICAL LIFE: 10,000 cycles INSULATION RESISTANCE: 100 M ohm min. DIELECTRIC STRENGTH: 1,000 VAC OPERATING TEMPERATURE: 0ºC to +120ºC (without wire) 0ºC to +85ºC (with UL1007 wire) 0ºC to +105ºC (with UL1015 wir e) 0ºC to +105ºC (with UL1430 wir e) 0ºC to +80ºC (with UL1061 wir e) 0ºC to +120ºC (with UL1330 wir e) OPERATING FORCE: (see ACTUATOR’S option sections). MOUNTING: 2-56 screws, torque 2.3 in/lbs max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center . Materials SWITCH HOUSING: Thermoplastic polyester or high temperature thermoplastic (PTS) (UL 94V-0). ACTUATOR BUTTON: Thermoplastic polyester. SPRING: Copper alloy. PIVOT: Copper alloy. MOVABLE CONTACTS: Silver nickel STATIONARY CONTACTS: Silver nickel on copper alloy. TERMINALS: Copper alloy. ACTUATOR LEVEL: Stainless steel. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-27 thru J-29. For additional options not shown in catalog, consult Customer Service Center. Series LCS Contact Rating 05 5 AMP , 125/250 V AC

6 AMP, 250 V AC

01 0.1 AMP , 125/250 V AC Actuator P00 Pin plunger T00 11.9 mm short lever T05 17.4 mm short lever T07 19.4 mm short lever T13 25.5 mm lever T19 33.3 mm lever T28 40.7 mm lever T43 55.9 mm lever S26 18.6 mm simulated lever A05 17.2 mm lever roller Terminations S Solder Q 0.110 Quick Connect P PC Thru Hole W Wire leads potted Z Wire leads non-potted Wire Side (when required) A Wire out the bottom B Wire out the right side C Wire out the left side D None Models Available L C S Operating Force 1 150 grams 2 203 grams Circuitry C SPDT W SPST N.C. Y SPST N.O. Wire Type AWG 20 20 AWG 22 22 AWG 24 24 AWG 26 26 AWG 28 28 AWG 30 30 AWG Wire UL # (when required) A UL1007 B UL1015 C UL1430 D UL1061 E UL1330

J–27 Dimensions are shown: mm Specifications and dimensions subject to change www.ck-components.com LCS Series Subminiature Sealed Snap-acting Switches SERIES

3.2 TYP

1.6 TYP

19.8 6.4 9 9.8 2.3±0.1 2.35 TYP2.3 ± 0.1 TYP7.5± 0.2 7.5 9.5±0.15 2.6±0.1 2.2

2.8 TYP

TYP0.5± 0.05 2.4±0.1 LCS ELECTRICAL RATING OPERATING FORCE 150 g. max. 203 g. max. OPERATING FORCES (grams)OPTION CODE RoHS COMPLIANT * RoHS COMPATIBLE * OPTION CODE ELECTRICAL RA TING

5 AMP, 125/250 V AC

6 AMP , 250 V AC05YESYES

0.1 AMP , 125/250 V AC01YESYES

C 11.9 0.2 ref. B C D E 19.4 7.15 ref. 25.50 13.2 ref 33.3 20.95 ref. 40.7 28.35 ref. 18.6 6.1 ref. E D C 17.2 4.4 ref. D E C 17.4 5.05 ref. 55.9 43.55 ref. 7.5 ACTUATOR OPTION CODE ABCDE DIFF. MOTION (MAX) OPERATING FORCE (MIN) RELEASE FORCE (MIN) LENGTH OF LEVER OVER TRAVEL (MIN) PRE TRAVEL (MAX) OPERATING POSITION FREE POSITION (MAX) 150 203 150 203 150 203 T19 33.3 0.95 0.2 0.5 0.6 0.7 0.9 1.75 0.65 0.6 32 40 52 grams grams grams grams grams grams Grams Gramsmmmm mm mm mm mm LCS Series Subminiature Sealed Snap-acting Switches ACTUATOR P00 T19 T07 A05 T00 T28 T13 S26 T05 T43 J Snap-acting J–28 Dimensions are shown: mm Specifications and dimensions subject to change www.ck-components.com

J–29 Dimensions are shown: mm Specifications and dimensions subject to change www.ck-components.com TYP7.5 ± 0.2

4.00 TYP

3X /1.51.35 TYP7.5± 0.1 15±0.1 RECOMENDED MOUNTING PATTERN LCS Series Subminiature Sealed Snap-acting Switches TERMINATIONS 2.4 TYP7.5 ± 0.2 S SOLDER Q QUICK CONNECT 2.8mm / 0.110” P PC THRU HOLE

1.2 TYP

6.95 TYP7.5 ± 0.1 CIRCUITRY C SPDT (Single Pole, Double Throw) W SPST N.C. (Single Pole, Single Throw, Normally Closed) Y SPST N.O. (Single Pole, Single Throw, Normally Open) Z or W “A” WIRE ORIENTATION 304.8 ± 6.4 8.5 15.95 3±1 C: BLACK NO: BLUE NC: GRAY Z or W “B” WIRE ORIENTATION “Y” OR “W” CIRCUITRY 21.3 3±1 12±0.1 6.4 8.5 BLACK COM BLUE NO Z or W “C” WIRE ORIENTATION “Y” OR “W” CIRCUITRY 8.5 12± 0.1 3±16.4 21.3 BLACK COM BLUE NO Z or W “B” WIRE ORIENTATION “C” CIRCUITRY 21.3 12±0.1 3±1 12.3 6.4 BLACK COM GRAY NC BLUE NO Z or W “C” WIRE ORIENTATION “C” CIRCUITRY 21.312 ± .1 3±1 12.3 6.4 BLACK COM GRAY NC BLUE NO