LCP12 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

1 Characteristics

Table 1. Compliant with the following standards Table 2. Absolute maximum ratings (T amb = 25 °C)

Figure 3. Pulse waveform Table 3. Thermal resistance Table 4. Parameters related to the negative suppressor

  1. The V DGL value is the difference between the peak line voltage during the surge and the programmed gate voltage.

Table 5. Parameters related to the positive suppressor

  1. The V DGL value is the difference between the peak line voltage during the surge and the programmed gate voltage.

Table 6. Parameters related to TIP or RING / GND

2 Technical information

Figure 7. LCP12 concept behavior and negative firing thresholds to be programmed. The LCP12 has two gates (Gn and Gp). and the same Figure 4 also applies. V surge = peak surge voltage imposed by the standard.

3 Package information

  • Epoxy meets UL94, V0
  • Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

Figure 9. SO-8 wide dimension definitions

Figure 10. SO-8 wide footprint in mm (inches) Table 8. SO-8 wide dimension values

4 Ordering information

5 Revision history

Table 9. Ordering information Table 10. Document revision history 14-May-2010 1 Initial release. 18-Jun-2012 3 Updated dimension D in SO-8 wide. 20-Mar-2014 4 Updated Description, Table 6 and Package information formatting.