DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
File Name:LCM-40 IoT-SPEC 2021-09-03 Tuya R-41027766 THOMAS SAMUEL THOMAS SAMUEL 40W Wireless Lighting Constant Current LED Driver Solution LCM - 4 0 Io T Series User’s Manual
VOLTAGE RANGE Note.2 FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) Note.4 AC CURRENT (Typ.) INPUT INRUSH CURRENT (Typ.) LEAKAGE CURRENT SAFETY STANDARDS WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MTBF DIMENSIONOTHERS NOTE PACKING 42W 110V 75V 180 ~ 295VAC 254 ~ 392VDC 47 ~ 63Hz 90% 20 ~ 90% RH non-condensing 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes OPEN CIRCUIT VOLTAGE (max.) ENVIRONMENT SAFETY & FUNCTION EMC PROTECTION WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P:3.75KVAC I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH CURRENT LEVEL 350mA 600mA500mA 700mA(default) 900mA 1050mA CURRENT TOLERANCE SHORT CIRCUIT OVER VOLTAGE OVER TEMPERATURE TEMP. COMPENSATION SYNCHRONIZATION Constant current limiting, recovers automatically after fault condition is removed Shutdown o/p voltage,re-power on to recover Please refer to "SYNCHRONIZATION OPERATION” section DIMMING RANGE Note.9 0~100% Minimum dimming level:6%,dim to off Shutdown o/p voltage, re-power on to recover 110 ~ 130V By external NTC, please refer to “TEMPERATURE COMPENSATION OPERATION”section TOTAL HARMONIC DISTORTION <0.5mA / 240VAC PF≧0.975/230VAC, PF≧0.96/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) COLD START 20A(twidth=260μs measured at 50% Ipeak) at 230VAC ; Per NEMA 410 ±5% ±0.03%/℃ (0 ~ 50℃) MAX. No. of PSUs on 16A CIRCUIT BREAKER 26 units (circuit breaker of type B) / 44 units (circuit breaker of type C) at 230VAC File Name:LCM-40 IoT-SPEC 2021-09-03 (Please refer to "STATIC CHARACTERISTIC" section) WORKING TEMP. MAX. CASE TEMP. Tcase=+90℃ Tcase=-20 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) AUXILIARY DC OUTPUT Nominal 12V(deviation 11.4~12.6V)@50mA for AUX-Type onlyoption CURRENT RIPPLE Note.5 5.0% max. @rated current Current level selectable via DIP switch, please refer to”DIP SWITCH TABLE” section THD< 20%(@load≧75%) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section) 2 ~ 100V 2 ~ 67V2 ~ 80V 2 ~ 57V 2 ~ 45V 2 ~ 40V 0.23A/230VAC 0.2A/277VAC EMC IMMUNITY 193.6K hrs min. MIL-HDBK-217F (25℃) 0.24Kg ; 54pcs/15Kg/1.12CUFT EMC EMISSION Note.7 WIRELESS PROTOCOL Bluetooth low energy 2.4GHz protocol <1W STANDBY POWER CONSUMPTION Note.8 UL8750, CSA C22.2 No.250.13-12, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 independent, GB19510.14,GB19510.1, BIS IS15885, EAC TP TC 004 approved Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C(@load≧40%) ; BS EN/EN61000-3-3; GB17625.1,GB17743, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(surge immunity Line-Line 2KV), EAC TP TC 020 40W Wireless Lighting Constant Current LED Driver Solution LCM - 4 0 Io T Series
BLOCK DIAGRAM PFC fosc : 60KHz PWM fosc : 80KHz File Name:LCM-40 IoT-SPEC 2021-09-03 LCM-40 IoT is a multiple-stage constant current driver, selection of output current through DIP switch is exhibited below. DIP SWITCH TABLE Io 350mA 500mA 600mA 700mA(factory default) 900mA 1050mA DIP S.W. 1 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON DETECTION CIRCUIT EMI FILTER RECTIFIERS POWER SWITCHING FILTER RECTIFIERS RECTIFIERS +12Vaux -VI/P CONTROL O.V.P. MCU PFC CIRCUIT PFC CONTROL O.T.P. PWM CURRENT LIMIT O.L.P. (optional) ON 1 2 3 4 5 6 ON 1 2 3 4 5 6 NOTE: For more output current is selectable, please contact MEANWELL for details 40W Wireless Lighting Constant Current LED Driver Solution LCM - 4 0 Io T Series
File Name:LCM-40 IoT-SPEC 2021-09-03 DIMMING OPERATION ※Bluetooth control ‧To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: BLE with Casambi/TY1 with Smart Life/SVA with Silvair Example: ■OFFICIAL WEBSITE AND ECOSYSTEM INFORMATION AC mains The APP for BLE type is “Casambi” The APP for SVA type is “Silvair”The APP for TY1 type is “Smart Life” DC output Lamp The real time Bluetooth IC temperature is shown in the APP. In case it reaches above 72 ºC (equivalent to Tc 85ºC), the driver will be turn off to provide a protection. In case the units is cooled down, it can be manually turn ON and back to normal operation again. NOTE: 1.This software temperature protection is an extra independent function from driver its own hardware over temperature protection(when it is enabled, it needs re-AC power on to recover). 2.In general the software temperature protection is triggered before the hardware one when in over temperature. NOTE: 1.Website: https://www.tuya.com NOTE: 1.Website: https://www.silvair.com 3.Website: https://www.casambi.com 40W Wireless Lighting Constant Current LED Driver Solution LCM - 4 0 Io T Series
File Name:LCM-40 IoT-SPEC 2021-09-03 ‧Synchronization up to 10 drivers (1 master + 9 slaves) Dimming operating range : 10%~100%‧ ‧Sync cable length : < 5m ‧Sync cable type : Flat cable ‧Sync cable cross section area : 22 – 24 AWG (0.2~0.3mm ) LCM-40 (Slave 2) - - -- - - SYN. SYN. SYN.LCM-40 IoT (Master) LCM-40 (Slave 1) SYNCHRONIZATION OPERATION 5m 5m NOTE: 1. Please make sure all units are set to 100% dimming setting (factory default) before synchronizing. 2. Min. Dimming operating range depends on dimmer setting. LCM-40BLE Push Button AC/N AC/L PUSH AC/N AC/L PUSH DIMMING FUNCTION ※Freely assignable (push) input(Push dimming function only for BLE) ‧The LCM BLE series also has one freely assignable AC mains (push) input. As with a CASAMBI sensor module, control pulses can be defined here (e.g. “controls a luminaire”; “controls an element”; “controls a group”; “controls scenes”; “controls all luminaires”; “change scenes”). See the reference connection figure in the above. 40W Wireless Lighting Constant Current LED Driver Solution LCM - 4 0 Io T Series
55 60 65 70 75 80 85 90 95 220KO 330KO 470KO NTC derating curve 220KΩ 330KΩ 470KΩ Sensed Temperature( )℃ Output Current (%) TEMPERATURE COMPENSATION OPERATION LCM-40 IoT series have the built-in temperature compensation function ; by connecting a temperature sensor (NTC resistor) between the +NTC / -NTC terminal of LCM-40 IoT series and the detecting point on the lighting system or the surrounding environment, output current of LCM-40 IoT could be correspondingly changed, based on the sensed temperature, to ensure the long life of LED. NTC resistance 220K 330K 470K Output Current < 60 , 100% of the rated current (corresponds to the setting current level)℃ < 70 , 100% of the rated current (corresponds to the setting current level)℃ < 80 , 100% of the rated current (corresponds to the setting current level)℃ > 60 , output current begins to reduce, please refer to the curve for details.℃ > 70 , output current begins to reduce, please refer to the curve for details.℃ > 80 , output current begins to reduce, please refer to the curve for details.℃ ◎ Dimming and synchronization function of the driver will be invalid when the "temperature compensation" function is in use. Notes: 1. MEAN WELL does not offer the NTC resistor and all the data above are measured by using THINKING TTC03 series. 2. If other brands of NTC resistor is applied,please check the temperature curve first. ◎ LCM-40 IoT series can still be operated normally when the NTC resistor is not connected and the value of output current will be the current level selected through the DIP switch. File Name:LCM-40 IoT-SPEC 2021-09-03 NTC reference: 40W Wireless Lighting Constant Current LED Driver Solution LCM - 4 0 Io T Series
File Name:LCM-40 IoT-SPEC 2021-09-03 OUTPUT LOAD vs TEMPERATURE STATIC CHARACTERISTIC AMBIENT TEMPERATURE,Ta (℃) LOAD (%) INPUT VOLTAGE (V) 60Hz LOAD (%) (HORIZONTAL) Tcase (℃) LOAD (%) (HORIZONTAL) ※De-rating is needed under low input voltage. -20 0 20 45 55 65 75 90 100Others 100 -15 0 15 300 40 50-20 60 70 1050mA 180 190 200 210 220 230 240 260 270 280 295 100 250 Bluetooth mesh LED driver for intelligent lighting Application 40W Wireless Lighting Constant Current LED Driver Solution LCM - 4 0 Io T Series
10% 15% 20% 25% 30% 35% 40% 45% 50% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 350mA 500mA 600mA 700mA 900mA 1050mA 10% 20% 30% 40% 50% 60% 70% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 350mA 500mA 600mA 700mA 900mA 1050mA 45.0% 50.0% 55.0% 60.0% 65.0% 70.0% 75.0% 80.0% 85.0% 90.0% 95.0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 350 500 600 700 900 1050 45.0% 50.0% 55.0% 60.0% 65.0% 70.0% 75.0% 80.0% 85.0% 90.0% 95.0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 350 500 600 700 900 1050 TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD LCM-40 IoT series possess superior working efficiency that up to 90% can be reached in field applications. ※Tcase at 80 ℃ ※Tcase at 80 ℃ EFFICIENCY (%) EFFICIENCY (%) LOAD (230Vac Input) LOAD (277Vac Input) File Name:LCM-40 IoT-SPEC 2021-09-03 0.50 0.53 0.56 0.59 0.62 0.65 0.68 0.71 0.74 0.77 0.80 0.83 0.86 0.89 0.92 0.95 0.98 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 350 500 600 700 900 1050 0.70 0.73 0.76 0.79 0.82 0.85 0.88 0.91 0.94 0.97 1.00 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 350 500 600 700 900 1050 POWER FACTOR (PF) CHARACTERISTIC ※Tcase at 80 ℃ PF PF LOAD (230Vac Input) LOAD (277Vac Input) (40W) (40W) LOAD (230Vac Input) THD LOAD (277Vac Input) THD 40W Wireless Lighting Constant Current LED Driver Solution LCM-40 IoT Series
File Name:LCM-40 IoT-SPEC 2021-09-03 MECHANICAL SPECIFICATION Case No.LCM-60A Unit:mm TB3 TB1 CN100 CN101 tc ‧ : Max. Case Temperature﹤90℃tc TB5 ※SYN. Connector( ):CN101/CN100 Pin No. Assignment Mating Housing JST XHP or equivalent Terminal JST SXH-001T-P0.6 or equivalent 1,3 2,4 ※Terminal Pin No. Assignment( )(Output) TB5 ※Terminal Pin No. Assignment( )(Input) TB1 Pin No. Pin No. Assignment Assignment AC/L AC/N ※Terminal Pin No. Assignment( ) TB3 Pin No. Pin No. Assignment Assignment +AUX(optional) +NTC -NTC-AUX(optional) Bottom View 6.75 6.75 81.5 6.75 110 123.5 6.75 39.3 65.5 7.8 7.8 SYN. ON 654321 ◎ Pin1(+AUX) / Pin2(-AUX) is the Auxiliary DC output for the optional model; it can be used to drive fan. 2-ψ 4.2 Installation Manual 2-ψ4 Please refer to : http://www.meanwell.com/manual.html
3 PUSH(BLE only)
40W Wireless Lighting Constant Current LED Driver Solution LCM - 4 0 Io T Series