LCFA

LCFA LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

• AEC-Q200 qualified
• Effective for suppressing common mode noise and almost no effect for high speed differential data line
• Differential mode cut-off frequency up to 4.65GHz at -3dB
• Low profile package
• Ceramic multilayer type SMD component
• Non-polarized product
• Conforming to RoHS directive
• High temperature soldering guaranteed: 260°C/10 seconds

Applications

• Automotive Infotainment: Display, Car Navigation, Head Unit, USB Jack
• ADAS: Car Camera System
• Automotive Telematics Control Unit, E-Call system, and Smart Keyless Entry system
• Automotive RGB line, LVDS line, HDMI for AVN, and High-speed CAN BUS line
• PDP, LCD TV, DVD Player, PC, Audio player, DSC, Set top box, Laptop, SSD, and Home Automation
• Portable/Wearable Devices
• Mobile phone, Tablet, Game console, POS, VR, and Dongle Pinout LCFA121002A900TG, LCFA121002B900TG, and LCFA201202A900TG Functional Block Diagram LCFA121002A900TG, LCFA121002B900TG, and LCFA201202A900TGLCFA201204A101TG Item Description Source Equipment Rdc Pin 1-3, 2-4 10mA DC Source Source Meter CM Impedance Pin 1-2(Short) to Pin 3-4(Short) LCR Meter (3GHz) Item Description Source Equipment Rdc Pin 1-8, 2-7 3-6, 4-5 10mA DC Source Source Meter CM Impedance Pin 1-2(Short) to Pin 8-7(Short) Pin 3-4(Short) to Pin 6-5(Short) LCR Meter (3GHz) 4 3 1 2 3 4 ~: Data Line LCFA201204A101TG ~: Data Line 4 3 1 2 3 4 Common Mode Noise Filter LCFA Series Pin1 Pin2 Pin3 Pin4 Pin1 Pin2 Pin3 Pin4 Pin8 Pin7 Pin6 Pin5

littelfuse.com © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice.

Electrical Characteristics

Transmission Characteristics (S-parameter) Impedance Curves Differencial Mode S21 Differencial Mode Part Number Size (mm) Size (inch) Common Mode Impedance (Ω) Rated Current (mA) Max. Cut-off Freq/ GHz DC Resistance (Ω) Max. Number of Lines Leakage Current (μA) Max. Insulation Resistance (MΩ) Min. LCFA121002A900TG 1210 0504 90(±25%) 100 4.65 4.0 2 1. 0 10 LCFA121002B900TG 1210 0504 90(±25%) 150 4.65 4.0 2 1. 0 10 LCFA201202A900TG 2012 0805 90(±25%) 100 3.89 4.0 2 1. 0 10 LCFA201204A101TG 2012 0805 100(±25%) 100 2.92 4.0 4 1. 0 10 Test Conditions

• Common Mode Impedance (Ω): @100MHz
• DC Resistance (Ω): 25ºC±2ºC
• Leakage Current (μA): 5V
• Insulation Resistance (Max. MΩ): 5V
• Rated Current (mA): 25ºC±2ºC Common Mode Noise Filter LCFA Series 1M 10M 100M 1G 10G 100 1k ICMAF112P900MFR Impedance (Ω) Frequency (Hz) LCFA121002A900TG LCFA121002B900TG 1M 10M1 00M1 G1 0G 100 1k ICMAF112P900MFR Impedance (Ω) Frequency (Hz) LCFA121002A900TG LCFA121002B900TG 1M 10M 100M 1G 10G -33 -30 -27 -24 -21 -18 -15 -12 Insertion Loss(dB) Frequency(Hz) ICMAF112P900MFRLCFA121002A900TG LCFA121002B900TG 1M 10M 100M1 G 10G -33 -30 -27 -24 -21 -18 -15 -12 Insertion Loss(dB) Frequency(Hz) ICMAF112P900MFR LCFA121002A900TG LCFA121002B900TG

littelfuse.com © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. Common Mode S21 Common Mode Transmission Characteristics (S-parameter) Impedance Curves Differencial Mode S21 Differencial Mode S21 Differencial Mode Differencial Mode Common Mode Noise Filter LCFA Series 1M 10M 100M 1G 10G 100 Impedance (Ω) Frequency (Hz) LCFA201202A900TG LCFA201204A101TG 1M 10M 100M 1G 10G 100 Impedance (Ω) Frequency (Hz) LCFA201202A900TG LCFA201204A101TG 1M 10M1 00M 1G 10G -33 -30 -27 -24 -21 -18 -15 -12 Insertion Loss(dB) Frequency(Hz) LCFA201202A900TG LCFA201204A101TG 1M 10M1 00M 1G 10G -33 -30 -27 -24 -21 -18 -15 -12 Insertion Loss(dB) Frequency(Hz) LCFA201202A900TG LCFA201204A101TG

littelfuse.com © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. Product Characteristics Soldering Parameters Recommended Soldering Profile ( Lead free condition) Reflow Condition Wave Soldering Pb-free assembly 260°C, 10 sec. max 160°C 1°C/second max 1°C/second max 2°C/second max 4 minutes max 185°C 260°C 260+0/-5°C 220°C 100 − 120 seconds 30 − 50 seconds 5 − 10 seconds TS(max) to TL - Ramp-up Rate Peak Temperature (TP) Ramp-down Rate Time 25°C to Peak Temperature (TP) Do not exceed - Temperature Min (Ts(min)) - Temperature (TL) (Liquidus) - Temperature Max (Ts(max)) - Temperature (tL) - Time (Min to Max) (ts) Average Ramp-up Rate (Liquidus Temp (TL) to peak) Time within 5°C of actual peak Temperature (tp) Pre Heat Reflow Time erutarep meT TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP Operating Temperature -40ºC to +125ºC (consider re-rating) Climatic Category -40ºC + 85ºC/8 days Stock Conditions -10ºC + 40ºC RH , ≤ 70% Vibration Resistance 5 g’s for 20 minutes, 12 cycles each of three orientations Lead Pull Strength 5N Solderability 260ºC, ≤10s (Reflow), Max 380ºC, ≤5s (Soldering iron) Soldering Heat Resistance Max 260ºC 10sec (Wave), Max Temperature: Max 380ºC (Max 5sec) Common Mode Noise Filter LCFA Series

littelfuse.com © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. Dimensions Recommended Footprint and Stencil Mask LCFA121002A900TG, LCFA121002B900TG Unit = mm Stencil Mask T = 0.10mm LCFA201204A101TG LCFA201202A900TG Common Mode Noise Filter LCFA Series

littelfuse.com © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. Carrie Tape Dimensions Tape and Reel Dimension LCFA121002A900TG, LCFA121002B900TG LCFA201202A900TG , LCFA201204A101TG t FEEDING HOLE CHIP INSERTING HOLE D E F W B P0 P2 P1 A t FEEDING HOLE CHIP INSERTING HOLE D E F W B P0 P2 P1 A Symbol Dimensions Millimeters A 1 .55±0.05 B 2.30±0.05 W 8.00±0.10 F 3.50±0.05 E 1 .75±0.05 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.10 D 1 .55±0.03 T 0.95±0.05 Symbol Dimensions Millimeters A 1 .15±0.05 B 1 .50±0.05 W 8.0+0.30, .0.10 F 3.50±0.05 E 1 .75±0.05 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.10 D 1 .55±0.03 T 0.75±0.05 TAPE REEL BACK (BOTTOM) TAPE COVER TAPE

45 PITCH

Empty Section Empty Section Leading SectionChip Mounting Section 50 PITCH 35 PITCH E D C W B R A t (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 4,000pcs Code A B C D E W T R Common Mode Noise Filter LCFA Series

littelfuse.com © 2017 Littelfuse Revised: 06/23/17 Specifications are subject to change without notice. Part Numbering System Ordering Information

Ordering Information

Part Number Packaging Specification Quantity & Packaging Code Taping WidthQuantity LCFA121002B900TG LCFA121002A900TG D00B1,400N/A N/A LCFA201204A101TG LCFA201202A900TG D00B D00B D00B 1,400 1,400 1,400 N/A N/A N/A N/A N/A N/A Dimensions Part Numbering System LCFA 1210 02 A 900 T G Function Common Mode Noise Filter for Automotive parts Series and Dimensions (L x W x T, mm ) 1.27 x 1.00 x 0.60 Common Mode Impedance (@100MHz), 900 = 90/uni03A9 Number of Lines Internal Code Tape and Reel Green 8.5 max.4 5.08 0.6 1.5 Holes in PCB 1 + 0.1 0.5 min L max. Long Leads (L=18.8mm) Short Leads (L=4.3mm) Climatic Category -40°C / +85°C / 21days Stock Condition +10°C to +60°C relative humidity 75% yearly average, without dew, maximum value for 30 days-95% Vibration Resistance 24 cycles at 15min. Each (IEC60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10g acceleration Product Characteristics Operating Temperature -40°C to +85°C (Consider re-rating)Materials Base/Cap: Brown Thermoplastic Polyamide PA6.6, UL 94 V0 Round Pins: Tin-plated Copper Lead Pull Strength 10 N (IEC 60068-2-21) Solderability 260°C, ≤ 3s (Wave) 350°C, ≤ 1s (Soldering Iron) Soldering Heat Resistance 260°C, 10s (IEC60068-2-20) 350°C, 3s (Soldering Iron) Part Number Reel Quantity 4,000 Common Mode Noise Filter LCFA Series