DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

LCCM Series – Chip Common Mode Filter

FEATURES

  • Small wire wound chip inductor with ferrite core and 2 common mode lines.
  • Highly effective in noise suppression
  • High common-mode impedance at noise band an low differential mode impedance at signal band factor. There is almost no distortion in high-speed signals.
  • Operating temperature -40°C ~ 85°C.

APPLICATIONS

  • EMI suppression for electronic devices.
  • USB line in personal computers and peripherals.
  • IEEE 1394 line for personal computers, DVC, and STB
  • LCD Panels.
  • Low-Voltage Differential Signal (LVDS) CONSTRUCTION DIMENSIONS A E E F B G C K K H I I J Type Size ABC E F G H I J K Weight (g) (inch) (1000pcs) mm (inches) LC Family LC = Chip Inductor CM Series CM = Common Mode 0805 Size 0805 1206 M Tolerance M = 20% R Packaging R = 7" Reel 101 Impedance 100 = 10 Ω 101 = 100 Ω 102 = 1000 Ω G Style G = Standard T Termination T = Sn Plating A Special A = Standard HOW TO ORDER Terminal Ferrite Enamel-insulated Wire

Impedance Tolerance Test DCR IDC Rated Voltage Withstanding Insulation (Ω) Condition (Ω) max. (mA) max. Vdc (V) Voltage Vdc Resistance (MHz) (V) (MΩ) min. 67 ±20% 100 0.25 400 50 125 10 90 ±20% 100 0.35 330 50 125 10 120 ±20% 100 0.30 370 50 125 10 180 ±20% 100 0.35 330 50 125 10 200 ±20% 100 0.35 330 50 125 10 260 ±20% 100 0.40 300 50 125 10 360 ±20% 100 0.40 280 50 125 10 370 ±20% 100 0.40 280 50 125 10

ELECTRICAL CHARACTERISTICS

LCCM Series – Chip Common Mode Filter 1206 Impedance Tolerance Test DCR IDC Rated Voltage Withstanding Insulation (Ω) Condition (Ω) max. (mA) max. Vdc (V) Voltage Vdc Resistance (MHz) (V) (MΩ) min. 90 ±20% 100 0.30 370 50 125 10 160 ±20% 100 0.40 340 50 125 10 260 ±20% 100 0.50 310 50 125 10 600 ±20% 100 0.80 260 50 125 10 1000 ±20% 100 1.00 230 50 125 10 2200 ±20% 100 1.20 200 50 125 10

LCCM0805 CHARACTERISTICS – IMPEDANCE vs. FREQUENCY Chip Inductors LCCM Series – Chip Common Mode Filter 0.1 1 10 100 1000 100 1000 LCCM0805M670 Frequency (MHz) Impedance (Ohm) 0.1 1 10 100 1000 100 1000 10000 LCCM0805M900 Frequency (MHz) Impedance (Ohm) 0.1 1 10 100 1000 100 1000 LCCM0805M121 Frequency (MHz) Impedance (Ohm) 0.1 1 10 100 1000 100 1000 10000 LCCM0805M181 Frequency (MHz) Impedance (Ohm) 0.1 1 10 100 1000 100 1000 LCCM0805M201 Frequency (MHz) Common Mode Impedance (Ohm) 0.1 1 10 100 1000 100 1000 10000 LCCM0805M261 Frequency (MHz) Impedance (Ohm) 1 10 100 1000 LCCM0805M361 Frequency (MHz) 0.1 1 10 100 1000 100 1000 10000 LCCM0805M371 Frequency (MHz) Impedance (Ohm) 0.1 100 1000 10000Impedance (Ohm) Differential Mode

LCCM1206 CHARACTERISTICS – IMPEDANCE vs. FREQUENCY Chip Inductors LCCM Series – Chip Common Mode Filter Common Mode Differential Mode 1 10 100 1000 100 1000 LCCM1206M900 Frequency (MHz) Impedance (Ohm) 1 10 100 1000 100 1000 10000 LCCM1206M261 Frequency (MHz) Impedance (Ohm) 1 10 100 1000 100 1000 LCCM1206M161 Frequency (MHz) Impedance (Ohm) 1 10 100 1000 100 1000 10000 LCCM1206M601 Frequency (MHz) Impedance (Ohm) 1 10 100 1000 100 1000 10000 LCCM1206M102 Frequency (MHz) Impedance (Ohm) 1 10 100 1000 100 1000 10000 LCCM1206M222 Frequency (MHz) Impedance (Ohm)

ENVIRONMENTAL CHARACTERISTICS ELECTRICAL PERFORMANCE TEST Chip Inductors LCCM Series – Chip Common Mode Filter Items Requirement Test Conditions I Test Methods Impedance LCR Meter HP 4291B DC Resistance DCR Micro-Ohm meter (GOM-801G) Test Voltage: 2.5 Times Rated Voltage Withstand Voltage (VDC) Testing Time: 60 seconds Charge Current: 0.5mA Test Voltage: Rated Voltage Rated Voltage (VDC) Testing Time: 1 to 5 seconds Charge Current: 1mA Insulation Resistance (I.R) Charge Current: 1minute 10M ohm min. Refer to standard electrical characteristic spec. Component should not be damaged Impedance change: Within± 20% Without distinct damage in appearance MECHANICAL PERFORMANCE TEST Items Requirement Test Conditions I Test Methods Base: 0805 2 Lbs Component Adhesion Cover: 0805 1 Lbs (Push Test) Base: 1206 4 Lbs Cover: 1206 2 Lbs Dropping chip by each side and corner. Drop Component should not Drop 10 times in total be damaged Drop height: 100 cm Drop weight: 125 g Solderability The terminal should at least The component shall be dipped in a be 90% covered with solder melted solder bath at 245 ±5°C for 3 seconds 1. Amplitude: 1.5 m/m Vibration Test Component should not 2. Frequency: 10-55-10Hz (1min.) (Low Frequency) be damaged 3. Direction: X, Y, Z 4. Duration: 2 Hrs/X, Y, Z The component should be soldered (232°C ± 5°C for 10 sec.) to tinned copper substrate Applied force gauge to the side of component It must withstand force of 2 or 4 pounds without failure of the component. MECHANICAL PERFORMANCE TEST Items Requirement Test Conditions I Test Methods 1. Temp: -40 ±2°C Low Temperature Storage 2. Time: 1000±48 Hours 3. Component should be tested after 1 hour at room temperature Thermal Shock Total: 5 Cycles 1. Temp: 85 ± 2°C High Temperature Storage 2. Time: 1000 ± 48 Hours 3. Component should be tested after 1 hour at room temperature 1. Temp: 40 ± 2°C Humidity 2. R.H. : 90 — 95% 3. Time: 48 ±2 Hours 1. Temp: 85 ± 2°C High Temperature Load Life 2. Time: 96 ± 12 Hours There should be no evidence of 3. Load: Allowed DC Current short or open circuit 1. Temp: -40 ± 2°C Low Temperature Load Life 2. Time: 96 ± 12 Hours 3. Load: Allowed DC Current -25 ± 2ºC

30 MINS

15 MINS

85 ± 2ºC

PACKAGING QUANTITY REAL SPECIFICATIONS EMBOSSED PLASTIC TAPE SPECIFICATIONS LEADER/TAPE Chip Inductors LCCM Series – Chip Common Mode Filter 178 ± 2.00 (7.008 ± 0.079) 60.0 ± 0.50 (2.362 ± 0.020) 1.20 ± 0.20 (0.047 ± 0.008) 9.00 ± 0.30 (0.354 ±0.0112) 11.4 ± 1.00 (0.449 ± 0.039) Label D: 21.8 ± 0.80 (0.858 ± 0.031) D: 13.0 ± 0.30 (0.512 ± 0.012) 2.00 ± 0.50 (0.079 ±0.020) W E F ψ D0 A B T ψ D11.5 Min. Embossed Tape Direction of unreeling Top Tape P1 P2 Trailer End Leader Trailer 80.0 (3.150) min. Cover Tape Only 450 (17.72) min. Empty Compartments with Cover Tape 80.0 (3.150) min. PEEL-OFF FORCE 160 - 180º Top cover tape Base tape The force for tearing off cover tape is 0.05 - 0.69 (N) in the arrow direction at the following conditions: Temperature: 5 - 35°C Humidity: 45 - 85% Atmospheric pressure: 860 - 1060hpa Type A B W E F P 0 P1 P2 ΦD0 T mm (inches) Embossed Type Plastic Tape (EA) LCCM0805 2,000 LCCM1206 2,000