LC503UHR-30Q-A CREELED | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Subject to change without notice. www.cree.com/ledlamps Data Sheet: CLD-CT011.000 Cree® 5-mm Round LED Model # LC503UHR-30Q-A Data Sheet 30-degree, 5-mm round LED lamp in red color with water-transparent lens and no stopper
Applications
Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Forward Current IF 50 mA Peak Forward Current Note IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ +95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Electrostatic Discharge Classification(MIL-STD-883E) ESD Class 2 Note: Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Symbol Condition Unit Minimum Typical Maximum Forward Voltage VF IF = 20 NjA V 2.1 2.6 Reverse Current IR VR = 5 V NjA 100 Dominant Wavelength NJD IF = 20 mA nm 618 624 630 Luminous Intensity IV IF = 20 mA mcd 3000 5100 50% Power Angle 2LJ½H-H IF = 20 mA deg 30
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT0.000 Cree, Inc.
4600 Silicon Drive
Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Standard Bins for LC503UHR-30Q-A (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (NJD) bins shown. Orders for LC503UHR1-30Q-A may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (NJD) values shown and specified are at IF = 20 mA. Z or above Y X W Important Notes: All ranks will be included per delivery; rank ratio will be based on the dice distribution. Pb content <1000 ppm. Tolerance of measurement of luminous intensity is ±15%. Tolerance of measurement of dominant wavelength is ±1 nm. Tolerance of measurement of VF is ±0.05 V. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” docu- ment. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. 618 nm Dominant Wavelength (NJD) Luminous Intensity (IV) 630 nm 8200 mcd 5860 mcd 4180 mcd 3000 mcd
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT0.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Graphs 4/4 Format #: COTCO-D-074 REV.4 Document No. SPE/ LC503UHR1-30Q-A Rev. No. 03 GGrraapphhss FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C) 60.0 20.00.0 40.0 Ta( C) 100.080.0 IF(mA) 100 FORWARD CURRENT. FIG.3 RELATIVE LUMINOUS INTENSITY VS. 60.020.00.0 0.0 1.0 40.0 100.080.0 If(mA) 100.0 FORWARD VOLTAGE. 3.0 2.0 4.0 5.0 FIG.1 FORWARD CURRENT VS. 2.42.01.8 0.0 20.0 2.2 60.0 40.0 80.0 2.82.6 Vf(V) If (mA) FIG.4 RELATIVE LUMINOUS INTENSITY VS. FIG.6 FAR FIELD PATTERN -90 WAVELENGTH. 50% Power Angle : 30 400 25% 500 600 700 800 Ie(%) 100% 100% 900 WL(nm) 75% 50% 100% Half Power WL=23nm Domi WL= 624nm -10.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -50.0 -30.0 -40.0 -20.0 -10 Vr(V) -60 -50 -40 -20-30 0.0 -60 -30 300 60 20% 20% 40% 40% 60% 60% 80% 80% Items Signatures Date Revision History Prepared by WangFJ 2007-09-21 Rev. No Date Change Description Checked by WangDW 2007-09-21 02 2007-07-06 Release. IV from V,W,X,Y(typ)4200 to W,X,Y(typ)5100mcd. Approved by Add ESD rank David 2007-09-21 03 2007-09-21 FCN# FCN20070234 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT0.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 2/4 Format #: COTCO-D-074 REV.4 Document No. SPE/ LC503UHR1-30Q-A Rev. No. 03 AApppplliiccaattiioonnss:: DDiimmeennssiioonn DDrraawwiinngg - Advertising Signs - Indicators - Traffic - Automotive Lighting AAbbssoolluuttee MMaaxxiimmuumm RRaattiinnggss aatt TTaa == 2255°C Items Symbol Absolute maximum Rating Unit Forward Current*2 IF 50 mA Peak Forward Current*1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ + 95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max.260°C for 3 sec Max. (3mm from the base of the epoxy bulb) Electrostatic Discharge Classification (MIL-STD-883E) ESD Class II *1 pulse width <=0.1msec duty <=1/10 *2 For long term performance the drive currents between 10mA and 30mA are recommended. Please contact COTCO sales representative for more information on recommended drive conditions. TTyyppiiccaall EElleeccttrriiccaall && OOppttiiccaall CChhaarraacctteerriissttiiccss (( TTaa == 2255°C)) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 20mA --- 2.1 2.6 V Reverse Current IR VR = 5V --- --- 100 PA Dominant Wavelength OD IF = 20mA 618 624 630 nm Luminous Intensity IV IF = 20mA 3000 5100 --- mcd 50% Power Angle 2T½H-H IF = 20mA --- 30 --- deg
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT0.000 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LC503UHR1-30Q-A-00001 5mm Round 30 Red, Full Rank, Bulk Pack * Please contact your Cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * IV 0: Full luminous intensity distribution 1~9, A~Z . . . :special request * VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = Bulk pack 1~9, A~Z . . . : special request * Standard/Custom 0: Standard C: Custom Product P/N