LC45A

LC6.5_08 MICROSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

1500 WATT LOW CAPACITANCE

TRANSIENT VOLTAGE SUPPRESSOR Microsemi Scottsdale Division Page 1Copyright © 2008 10-29-2008 REV E WWW.Microsemi .COM SCOTTSDALE DIVISION LC6.5 thru LC170A, e3 DESCRIPTION APPEARANCE This hermetically sealed Transient Voltage Suppressor (TVS) product family includes a rectifier diode element in seri es and opposite direction to achieve low capacitance performance below 100 pF (see Figure 2). The low level of TVS capacitance may be used for protecting higher frequency applications in inductive switching environments or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. With virtually instantaneous response, they also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient capability is required, two of these low capacitance TVS devices may be used in parallel in opposite directions (anti -parallel) for complete ac protection as shown in Figure 4. DO-13 (DO-202AA) IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS

• Unidirectional low-capacitance TVS series for flexible thru-hole mounting (for bidirectional see Figure 4)
• Suppresses transients up to 1500 watts @ 10/1000 µs (see Figure 1)*
• Clamps transient in less than 100 pico seconds
• Working voltage (V WM) range 6.5 V to 170 V
• Hermetic sealed DO-13 metal package
• Options for screening in accordance with MIL-PRF- 19500 for JAN, JANTX, JANTXV, and JANS are also available by adding MQ, MX, MV, MSP prefixes respectively to part numbers, e.g. MXLC6.5A, etc.
• Surface mount equivalent packages also available as SMCJLCE6.5 - SMCJLCE170A or SMCGLCE6.5 - SMCGLCE170A in separate data sheet (consult factory for other surface mount options)
• Plastic axial-leaded equivalents available in the LCE6.5 - LCE170A series in separate data sheet
• RoHS Compliant devices available by adding “e3” suffix
• Protection from switching transients and induced RF
• Low capacitance for data line protection up to 1 MHz
• Protection for aircraft fast data rate lines up to Level 5 Waveform 4 and Level 2 Waveform 5A in RTCA/DO- 160D (also see MicroNote 130) & ARINC 429 with bit rates of 100 kb/s (per ARINC 429, Part 1, par 2.4.1.1)
• ESD & EFT protection per IEC 61000-4-2 and -4-4
• Secondary lightning protection per IEC61000-4-5 with

42 Ohms source impedance:

Class 1: LC6.5 to LC170A Class 2: LC6.5 to LC150A Class 3: LC6.5 to LC70A Class 4: LC6.5 to LC36A

• Secondary lightning protection per IEC61000-4-5 with

12 Ohms source impedance:

Class 1 : LC6.5 to LC90A Class 2: LC6.5 to LC45 A Class 3: LC6.5 to LC22A Class 4: LC6.5 to LC11A

• Secondary lightning protection per IEC61000-4-5 with

2 Ohms source impedance:

Class 2: LC6.5 to LC20A Class 3: LC6.5 to LC10A

• Inherently radiation hard per Microsemi MicroNote 050 MAXIMUM RATINGS MECHANICAL AND PACKAGING
• 1500 Watts at 10/1000 μs with repetition rate of 0.01% or less* at lead temperature (TL) 25oC (see Figs. 1, 2, & 4)
• Operating & Storage Temperatures: -65 o to +175oC
• THERMAL RESISTANCE: 50 oC/W (Typical) junction to lead at 0.375 inches (10 mm) from body or 110 oC/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm
• DC Power Dissipation *: 1 Watt at TL < +125oC 3/8” (10 mm) from body (see derating in Fig 3 and note below)
• Solder Temperatures: 260 o C for 10 s (maximum)
• CASE: DO-13 (DO-202AA), welded, hermetically sealed metal and glass
• FINISH: All external metal surfaces are Tin-Lead plated and solderable per MIL-STD-750 method 2026
• POLARITY: Cathode connected to case as shown by diode symbol (cathode positive for normal operation)
• MARKING: Part number and polarity diode symbol
• WEIGHT: 1.4 grams. (Approx)
• TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number)
• See package dimension on last page LC6.5 thru LC170A * TVS devices are not typically used for dc power dissipation and are instead operated < VWM (rated standoff voltage) except for transients that briefly drive the device into avalanche breakdown (VBR to VC region) of the TVS element. Also see Figures 3 and 4 for further protection details in rated peak pulse power for unidirectional and bidirectional configurations respectively. 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

TRANSIENT VOLTAGE SUPPRESSOR Microsemi Scottsdale Division Page 2Copyright © 2008 10-29-2008 REV E WWW.Microsemi .COM SCOTTSDALE DIVISION LC6.5 thru LC170A, e3 ELECTRICAL CHARACTERISTICS @ 25oC BREAKDOWN VOLTAGE MICROSEMI PART NUMBER REVERSE STANDOFF VOLTAGE VWM VOLTS V(BR) VOLTS MIN MAX I(BR) mA MAXIMUM STANDBY CURRENT ID @VWM μA MAXIMUM CLAMPING VOLTAGE VC @ IPP VOLTS MAXIMUM PEAK PULSE CURRENT IPP @ 10/1000 µs AMPS MAXIMUM CAPACITANCE @ 0 Volts, f = 1 MHz pF WORKING INVERSE BLOCKING VOLTAGE VWIB VOLTS INVERSE BLOCKING LEAKAGE CURRENT IIB @ VWIB µA PEAK INVERSE BLOCKING VOLTAGE VOLTS VPIB VOLTS LC6.5 LC6.5A LC7.0 LC7.0A 6.5 6.5 7.0 7.0 7.22 7.22 7.78 7.78 8.82 7.98 9.51 8.60 1000 1000 500 500 12.3 11.2 13.3 12.0 100 100 100 100 100 100 100 100 100 100 100 100 LC7.5 LC7.5A LC8.0 LC8.0A 7.5 7.5 8.0 8.0 8.33 8.33 8.89 8.89 10.2 9.21 10.9 9.83 250 250 100 100 14.3 12.9 15.0 13.6 100 100 100 100 100 100 100 100 100 100 100 100 LC8.5 LC8.5A LC9.0 LC9.0A 8.5 8.5 9.0 9.0 9.44 9.44 10.0 10.0 11.5 10.4 12.2 11.1 15.9 14.4 16.9 15.4 100 100 100 100 100 100 100 100 100 LC10 LC10A LC11 LC11A 11.1 11.1 12.2 12.2 13.6 12.3 14.9 13.5 18.8 17.0 20.1 18.2 100 100 100 100 100 100 100 100 LC12 LC12A LC13 LC13A 13.3 13.3 14.4 14.4 16.3 14.7 17.6 15.9 22.0 19.9 23.8 21.5 100 100 100 100 100 100 100 100 LC14 LC14A LC15 LC15A 15.6 15.6 16.7 16.7 19.1 17.2 20.4 18.5 25.8 23.2 26.9 24.4 100 100 100 100 100 100 100 100 LC16 LC16A LC17 LC17A 17.8 17.8 18.9 18.9 21.8 19.7 23.1 20.9 28.8 26.0 30.5 27.6 100 100 100 100 100 100 100 100 LC18 LC18A LC20 LC20A 20.0 20.0 22.2 22.2 24.4 22.1 27.1 24.5 32.2 29.2 35.8 32.4 100 100 100 100 100 100 100 100 LC22 LC22A LC24 LC24A 24.4 24.4 26.7 26.7 29.8 26.9 32.6 29.5 39.4 35.5 43.0 38.9 100 100 100 100 100 100 100 100 LC26 LC26A LC28 LC28A 28.9 28.9 31.1 31.1 35.3 31.9 38.0 34.4 46.6 42.1 50.1 45.4 100 100 100 100 100 100 100 100 LC30 LC30A LC33 LC33A 33.3 33.3 36.7 36.7 40.7 36.8 44.9 40.6 53.5 48.4 58.0 53.3 25.4 28.1 100 100 100 100 100 100 100 100 LC36 LC36A LC40 LC40A 40.0 40.0 44.4 44.4 48.9 44.2 54.3 49.1 64.3 58.1 71.4 64.5 23.3 25.8 21.0 23.3 100 100 100 100 100 100 100 100 LC43 LC43A LC45 LC45A 47.8 47.8 50.0 50.0 58.4 52.8 61.1 55.3 76.7 69.4 80.3 72.7 19.5 21.6 18.7 20.6 100 100 100 100 150 150 150 150 200 200 200 200 LC48 LC48A LC51 LC51A 53.3 53.3 56.7 56.7 65.1 58.9 69.3 62.7 85.5 77.4 91.1 82.4 17.5 19.4 16.5 18.2 100 100 100 100 150 150 150 150 200 200 200 200 LC6.5 thru LC170A 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

TRANSIENT VOLTAGE SUPPRESSOR Microsemi Scottsdale Division Page 3Copyright © 2008 10-29-2008 REV E WWW.Microsemi .COM SCOTTSDALE DIVISION LC6.5 thru LC170A, e3 BREAKDOWN VOLTAGE MICROSEMI PART NUMBER REVERSE STANDOFF VOLTAGE VWM VOLTS V(BR) VOLTS MIN MAX I(BR) mA MAXIMUM STANDBY CURRENT ID @VWM μA MAXIMUM CLAMPING VOLTAGE VC @ IPP VOLTS MAXIMUM PEAK PULSE CURRENT IPP @ 10/1000 µs AMPS CAPACI- TANCE @ 0 Volts pF WORKING INVERSE BLOCKING VOLTAGE VWIB VOLTS INVERSE BLOCKING LEAKAGE CURRENT IIB @ VWIB µA PEAK INVERSE BLOCKING VOLTAGE VOLTS VPIB VOLTS LC54 LC54A LC58 LC58A 60.0 60.0 64.4 64.4 73.3 66.3 78.7 71.2 96.3 87.1 103.0 93.6 15.6 17.2 14.6 16.0 100 100 100 100 150 150 150 150 200 200 200 200 LC60 LC60A LC64 LC64A 66.7 66.7 71.1 71.1 81.5 73.7 86.9 78.6 107.0 96.8 114.0 103.0 14.0 15.5 13.2 14.6 150 150 150 150 200 200 200 200 LC70 LC70A LC75 LC75A 77.8 77.8 83.3 83.3 95.1 86.0 102.0 92.1 125 113 134 121 12.0 13.3 11.2 12.4 150 150 150 150 200 200 200 200 LC80 LC80A LC90 LC90A 88.7 88.7 100 100 108 98.0 122 111 142 129 160 146 10.6 11.6 9.4 10.3 150 150 300 300 200 200 200 200 LC100 LC100A LC110 LC110A 100 100 110 110 111 111 122 122 136 123 149 135 179 162 196 178 8.4 9.3 7.7 8.4 300 300 300 300 200 200 400 400 LC120 LC120A LC130 LC130A 120 120 130 130 133 133 144 144 163 147 176 159 214 193 231 209 7.0 7.8 6.5 7.2 300 300 300 300 400 400 400 400 LC150 LC150A LC160 LC160A 150 150 160 160 167 167 178 178 204 185 218 197 268 243 287 259 5.6 6.2 5.2 5.8 300 300 300 300 400 400 400 400 LC170 LC170A 170 170 189 189 231 209 304 275 4.9 5.4 300 300 400 400 NOTE: TVS are normally selected according to the reverse “Standoff Voltage” (VWM) that should be equal to or greater than the dc or continuous peak operating voltage level. GRAPHS Peak Pulse Power LC6.5 thru LC170A FIGURE 1 Pulse Time (tw) in μs Pulse Time (tW) in μs vs. 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

TRANSIENT VOLTAGE SUPPRESSOR Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4Copyright © 2008 10-29-2008 REV E WWW.Microsemi .COM SCOTTSDALE DIVISION LC6.5 thru LC170A, e3 SCHEMATIC APPLICATIONS The TVS low capacitance device configuration is shown in Figure 2. As a further option for unidirectional applications, an additional low capacitance rectifier diode may be used in parallel in the same polarity direction as the TVS as shown in Figure 3. In applica tions where random high voltage transients occur, this will prevent reverse transients from damaging the internal low capacitance rectifier diode and also provide a low voltage conducting direction. The added rectifier diode should be of similar low capacitance and also have a higher reverse voltage rating than the TVS clamping voltage VC. The Microsemi recommended rectifier part number is the “LCR80” for the application in Figure 5. If using two (2) low capacitance TVS devices in anti-parallel for bidirectional applications, this added protective feature for both directions (including the reverse of each rectifier diode) is also provided. The unidirectional and bidirectional configurations in Figure 3 and 4 will both result in twice the capacitance of Figure 2. FIGURE 2 FIGURE 3 FIGURE 4 TVS with internal Low Optional Unidirectional Optional Bidirectional Capacitance Diode configuration (TVS and configuration (two TVS separate rectifier diode) devices in anti-parallel) in parallel) PACKAGE DIMENSIONS LC6.5 thru LC170A DO-13 (or DO-202AA)