LC2D25F7

LC2D25F7 SCHNEIDER | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Mar 08, 2017 Product datasheet Characteristics LC2D25F7 REVERSING CONTACTOR 575VAC 25A IEC Main Range of product TeSys D Range TeSys Product name TeSys D Product or component type Reversing contactor Device short name LC2D Contactor application Resistive load Motor control Utilisation category AC-1 AC-3 Device presentation Preassembled with reversing power busbar Poles description 3P Pole contact composition 3 NO [Ue] rated operational voltage <= 300 V DC for power circuit <= 690 V AC 25...400 Hz for power circuit [Ie] rated operational current 25 A (<= 60 °C) at <= 440 V AC AC-3 for power circuit

40 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit

Motor power kW 11 kW at 380...400 V AC 50/60 Hz 15 kW at 500 V AC 50/60 Hz 15 kW at 660...690 V AC 50/60 Hz 5.5 kW at 220...230 V AC 50/60 Hz 11 kW at 415...440 V AC 50/60 Hz Motor power hp 2 hp at 115 V AC 50/60 Hz for 1 phase motors 3 hp at 230/240 V AC 50/60 Hz for 1 phase motors 5 hp at 200/208 V AC 50/60 Hz for 3 phases motors 7.5 hp at 230/240 V AC 50/60 Hz for 3 phases motors 15 hp at 460/480 V AC 50/60 Hz for 3 phases motors 20 hp at 575/600 V AC 50/60 Hz for 3 phases motors Control circuit type AC 50/60 Hz Control circuit voltage 110 V AC 50/60 Hz Auxiliary contact composition 1 NO + 1 NC [Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947 Overvoltage category III

[Ith] conventional free air thermal current

40 A at <= 60 °C for power circuit

10 A at <= 60 °C for signalling circuit

Irms rated making capacity 450 A at 440 V for power circuit conforming to IEC 60947

140 A AC for signalling circuit conforming to IEC 60947-5-1

250 A DC for signalling circuit conforming to IEC 60947-5-1

Rated breaking capacity 450 A at 440 V for power circuit conforming to IEC 60947 [Icw] rated short-time withstand current 120 A <= 40 °C 1 min power circuit

240 A <= 40 °C 10 s power circuit

380 A <= 40 °C 1 s power circuit

50 A <= 40 °C 10 min power circuit

100 A 1 s signalling circuit

120 A 500 ms signalling circuit

140 A 100 ms signalling circuit

Associated fuse rating 40 A gG at <= 690 V coordination type 2 for power circuit

63 A gG at <= 690 V coordination type 1 for power circuit

10 A gG for signalling circuit conforming to IEC 60947-5-1

Average impedance 2 mOhm at 50 Hz - Ith 40 A for power circuit [Ui] rated insulation voltage 600 V for power circuit certifications CSA

600 V for power circuit certifications UL

690 V for power circuit conforming to IEC 60947-4-1

690 V for signalling circuit conforming to IEC 60947-1

600 V for signalling circuit certifications CSA

600 V for signalling circuit certifications UL

Electrical durability 1.65 Mcycles 25 A AC-3 at Ue <= 440 V

1.4 Mcycles 40 A AC-1 at Ue <= 440 V

Power dissipation per pole 3.2 W AC-1

1.25 W AC-3

Interlocking type Mechanical Mounting support Plate Rail Standards CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 Product certifications BV UL CCC CSA RINA GL GOST LROS DNV Connections - terminals Control circuit : screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable end Power circuit : screw clamp terminals 1 cable(s) 1.5...10 mm² - cable stiffness: solid - without cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - with cable end Control circuit : screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: solid - without cable end Control circuit : screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: solid - without cable end Power circuit : screw clamp terminals 1 cable(s) 2.5...10 mm² - cable stiffness: flexible - without cable end Power circuit : screw clamp terminals 2 cable(s) 2.5...10 mm² - cable stiffness: flexible - without cable end Power circuit : screw clamp terminals 1 cable(s) 1...10 mm² - cable stiffness: flexible - with cable end Power circuit : screw clamp terminals 2 cable(s) 1.5...6 mm² - cable stiffness: flexible - with cable end Power circuit : screw clamp terminals 2 cable(s) 2.5...10 mm² - cable stiffness: solid - without cable end Tightening torque Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Control circuit : 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit : 2.5 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Power circuit : 2.5 N.m - on screw clamp terminals - with screwdriver Philips No 2

Operating time 4...19 ms opening 12...22 ms closing Safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 Mechanical durability 15 Mcycles Operating rate 3600 cyc/h at <= 60 °C Complementary Coil technology Without built-in suppressor module Inrush power in VA 70 VA at 20 °C (cos ϕ 0.75) 60 Hz 70 VA at 20 °C (cos ϕ 0.75) 50 Hz Hold-in power consumption in VA 7.5 VA at 20 °C (cos ϕ 0.3) 60 Hz 7 VA at 20 °C (cos ϕ 0.3) 50 Hz Heat dissipation 2...3 W at 50/60 Hz Auxiliary contacts type Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1 Type mirror contact (1 NC) conforming to IEC 60947-4-1 Signalling circuit frequency 25...400 Hz Minimum switching current 5 mA for signalling circuit Non-overlap time 1.5 ms on de-energisation (between NC and NO contact) 1.5 ms on energisation (between NC and NO contact) Insulation resistance > 10 MOhm for signalling circuit Motor starter type Reversing contactor Contactor coil voltage 110 V AC Environment IP degree of protection IP20 front face conforming to IEC 60529 Protective treatment TH conforming to IEC 60068-2-30 Pollution degree 3 Ambient air temperature for operation -20...60 °C Ambient air temperature for storage -60...80 °C Permissible ambient air temperature around the device -40...70 °C at Uc Operating altitude 3000 m without derating in temperature Fire resistance 850 °C conforming to IEC 60695-2-1 Flame retardance V1 conforming to UL 94 Mechanical robustness Vibrations contactor open 2 Gn, 5...300 Hz Vibrations contactor closed 4 Gn, 5...300 Hz Shocks contactor closed 15 Gn for 11 ms Shocks contactor open 8 Gn for 11 ms Height 85 mm Width 90 mm Depth 92 mm Product weight 0.787 kg Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant - since 0627 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold

Product environmental profile Available Product environmental Product end of life instructions Available End of life manual Contractual warranty Warranty period 18 months

<!-- File : MPC-LC2D25F7-BOM.xml , Range ID : 664, Reference ID : LC2D25F7 --> Our Proposal - Type 1 : Circuit Breaker + Contactor for Motor Power from 9 to 11 kW and 415 VAC <!-- DataBOM 2 Template BEGIN --> Motor Power (kW) Icu (kA) Breaker Contactor 9 15 GV2ME21 LC2D25F7 11 15 GV2ME22 LC2D25F7 Non contractual pictures. Type 1 coordination requires that in a short-circuit condition, the contactor or starter must not present any danger to personnel or installations and must not be able to resume operation without repair or the replacement of parts. <!-- DataBOM 2 Template END --> <!-- No Variants -->