LC03-6R2G ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • /C0259SO-8 Package
  • /C0259Peak Power - 2000 Watts 8 x 20 /C0109S
  • /C0259ITU K.20 IPP = 40 A (5/310 /C0109s)
  • /C0259Bellcore 1089 (Intra-Building) 100 A (2/10 /C0109s)
  • /C0259ESD Rating: IEC 61000-4-2 (ESD) 15 kV (air) 8 kV (contact) IEC 61000-4-4 (EFT) 40 A (5/50 ns) IEC 61000-4-5 (lighting) 95 A (8/20 /C0109s)
  • /C0259UL Flammability Rating of 94 V-0
  • /C0259Pb-Free Package is Available Typical Applications
  • /C0259High Speed Communication Line Protection MAXIMUM RATINGS Rating Symbol Value Unit Peak Power Dissipation 8 x 20 /C0109S @ TA = 25°C (Note 1) Ppk 2000 W Peak Pulse Current (8 x 20 /C0109S Waveform) IPP 100 A Junction and Storage Temperature Range TJ, Tstg - /C025755 to +150°C Lead Solder Temperature - Maximum 10 Seconds Duration TL 260 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Non-repetitive current pulse 8 x 20 /C0109S exponential decay waveform SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kW PEAK POWER

6 VOLTS

http://onsemi.com MARKING DIAGRAM SOIC-8 CASE 751 PLASTIC †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. LC036 AYWW/C0071 /C0071 LC036 = Device Code A = Assembly Location Y = Year WW = Work Week /C0071 = Pb-Free Package (Note: Microdot may be in either location) Device Package

ORDERING INFORMATION

Shipping† LC03-6R2 SO-8 2500/Tape & Reel LC03-6R2G SO-8 (Pb-Free) 2500/Tape & Reel

I/O data lines such as USB 1.1 ports. them to a fixed reference point for clamping purposes. mode (Line-to-Line) or common mode (Line-to-ground). for the ground return connections. Figure 5. Configuration for Differential between Tip and Ring on the transmit and receive line pairs. surges are suppressed by the isolation of the transformer.

Figure 7. Typical T1 Line Card Protection ESD conditions in the real field of the application. due to ESD conditions or transient voltage conditions.

http://onsemi.com PACKAGE DIMENSIONS SOIC-8 NB CASE 751-07 ISSUE AH SEATING PLANE N J X 45/C0095 K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. 751-01 THRU 751-06 ARE OBSOLETE. NEW STANDARD IS 751-07. A B S DH C 0.10 (0.004) DIM A MIN MAX MIN MAX INCHES 4.80 5.00 0.189 0.197 MILLIMETERS B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.053 0.069 D 0.33 0.51 0.013 0.020 G 1.27 BSC 0.050 BSC H 0.10 0.25 0.004 0.010 J 0.19 0.25 0.007 0.010 K 0.40 1.27 0.016 0.050 M 0 8 0 8 N 0.25 0.50 0.010 0.020 S 5.80 6.20 0.228 0.244 -X- -Y- G MYM0.25 (0.010) -Z- YM0.25 (0.010) Z S X S M /C0095/C0095/C0095/C0095 1.52 0.060 7.0 0.275 0.6 0.024 1.270 0.050 4.0 0.155 /C0466mm inches/C0467SCALE 6:1 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 LC03-6R2/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative