LC03-6 APMICRO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
Low capacitance for high speed interfaces Ultra low leakage: nA level Low operating voltage Low clamping voltage Protects two lines in common and differential mode JEDEC SO-8 package Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV – IEC61000-4-5 (Lightning) 100A (8/20μs) RoHS Compliant LC03-6 Low Capacitance TVS Part Number Packaging Reel Size LC03-6 2500/Tape & Reel 13 inch LC-6 = Device Marking Code YYWW = Date Code Dot denotes Pin1 Circuit and Pin Schematic Dimensions and Pin Configuration Mechanical Characteristics Package: SO-8 Lead Finish: Matte Tin Case Material: “Green” Molding Compound. Moisture Sensitivity: Level 3 per J-STD-020 Terminal Connections: See Diagram Below Marking Information: See Below
Applications
T1/E1 Line Cards T3/E3 and DS3 Interfaces STS-1 Interfaces 10/100/1000 BaseT Ethernet ISDN Interfaces Low Voltage Interfaces Marking Information
Ordering Information
All d ata sheet.com
Revision 12/2017 2 of 8 www.appliedpowermicro.com Absolute Maximum Ratings (TA=25°C unless otherwise specified) Electrical Characteristics (TA=25°C unless otherwise specified) Parameter Symbol Value Unit Peak Pulse Power (8/20µs) Ppk 2000 W Peak Pulse Current (8/20µs) IPP 100 A ESD per IEC 61000−4−2 (Air) ESD per IEC 61000−4−2 (Contact) VESD ±30 ±30 kV Operating Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Parameter Symbol Min Typ Max Unit Test Condition Reverse Working Voltage VRWM 6 V Breakdown Voltage VBR 6.8 V IT = 1mA Reverse Leakage Current IR 25 µA VRWM = 6V Clamping Voltage VC 15 V IPP = 50A (8 x 20µs pulse), any I/O pin to ground Clamping Voltage VC 20 V IPP = 100A (8 x 20µs pulse), any I/O pin to ground Junction Capacitance CJ 16 25 pF VR = 0V, f = 1MHz, between I/O pins and ground Junction Capacitance CJ 8 12 pF VR = 0V, f = 1MHz, between I/O pins LC03-6 Note 1: I/O pins are Pin 1, 4, 5 and 8 All d ata sheet.com
Revision 12/2017 3 of 8 www.appliedpowermicro.com Typical Performance Characteristics (TA=25°C unless otherwise Specified) LC03-6 Junction Capacitance vs. Reverse Voltage Peak Pulse Power vs. Pulse Time
8 X 20μs Pulse Waveform
+8 kV Contact per IEC61000−4−2 Note：Data is taken with a 10x attenuator Clamping Voltage vs. Peak Pulse Current (tp = 8/20us) All d ata sheet.com
Revision 12/2017 4 of 8 www.appliedpowermicro.com Typical Application The LC03-6 is designed to protect two high speed data lines (one differential pair) from transient over -voltages which result from lightning and ESD. The device can be configured to protect in differential (Line to Line) and common (Line to Ground) mode. Data line inputs/outputs are connected at pins 1 to 8, and 4 to 5 as shown below. Pins 2, 3, 6, 7 are connected to ground. These pins should be connected directly to a ground plane on the board for the best results, the path length is kept as short as possible to minimize parasitic inductance. In applications where high com- mon voltages are present, differential protection is achieved by leaving pins 2, 3, 6, and 7 not connected. LC03-6 Connection for differential (Line to Line) and common mode protection (Line to Ground) Connection for differential protection (Line to Line) All d ata sheet.com
Revision 12/2017 5 of 8 www.appliedpowermicro.com LC03-6 AR3304P8 LC03-6 LC03-6 on T1 Line Card Application LC03-6 on T3/E3 and STS-1 Application LC03-6 All d ata sheet.com
Revision 12/2017 6 of 8 www.appliedpowermicro.com LC03-6 on ISDN S-Interface Application LC03-6 on ISDN U-Interface Secondary Application LC03-6 All d ata sheet.com
Revision 12/2017 7 of 8 www.appliedpowermicro.com LC03-6 on 10/100 Ethernet Application LC03-6 on High Speed Driver/Receiver Application LC03-6 All d ata sheet.com
Revision 12/2017 8 of 8 www.appliedpowermicro.com Suggested Land Pattern Contact Information Applied Power Microelectronics Co., Ltd. Website: http://www.appliedpowermicro.com Email: sales@appliedpowermicro.com Phone: +86 (0519) 8399 3606 Applied Power Microelectronics Co., Ltd. (APM) reserves the right to make changes to the product specification and data in this document without notice. APM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APM assume any liability arising fro m the application or use of any products or circuits, and specifically dis- claims any and all liability, including without limitation special, consequential or incidental damages. SY M DIMENSIONS MILLIMETERS INCHES MIN NOM MAX MIN NOM MAX A 1.35 1.75 0.053 0.069 A1 0.10 0.25 0.004 0.010 A2 1.25 1.65 0.049 0.065 b 0.31 0.51 0.012 0.020 c 0.17 0.25 0.007 0.010 E 6.00 BSC 0.236 BSC e 1.27 BSC 0.050 BSC h 0.25 0.50 0.010 0.020 L1 (1.04) (0.041) N 8 8 θ1 0° 8° 0° 8° aaa 0.10 0.004 bbb 0.25 0.010 ccc 0.20 0.008 SYM DIMENSIONS MILLIMETERS INCHES C (5.20) 0.205 G 3.00 0.118 P 1.27 0.050 X 0.60 0.024 Y 2.20 0.087 Z 7.40 0.291 LC03-6 All d ata sheet.com