LBWA1UZ1GC-901

LBWA1UZ1GC-901 MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 28

Technical content

Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. W-LAN / LAN Module Data Sheet Cypress WLAN / LAN Chipset CYW43907 Electric Imp P/N : imp005 MURATA P/N : LBWA1UZ1GC-901 This Datasheet is a preliminary version, and subject to change without notice.

Preliminary Specification Number : SP-UZ1GC_01-C 1 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. The revision history of the product specification Issued Date Revision Code Revision Page Changed Items Change Reason Dec. 25. 2015 First Issue Mar. 18. 2016 A P5 P6 P11 P13 P14 P21 Adding Structure Adding Pin Layout Revised 6. Operating Condition Adding 9. Digital I/O Requirements Revised 10. RF Characteristics Adding 12. Reference Circuit Update Dec. 30. 2016 B P3 P4 P7 P11 P12 P13 P16 P17 P18 P19 - Update

Preliminary Specification Number : SP-UZ1GC_01-C 2 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 3 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 4 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 3. Block Diagram

Preliminary Specification Number : SP-UZ1GC_01-C 5 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 4. Dimensions, Marking and Terminal Configurations 4.1. Dimensions L W T （D1） （D5） (D9) （D2） (D10) (D11) (D12) (E1)(E6) (E7) (E12) (C15) (C16)(C7) (C8) (A16） （A29） （D3） （D4） （A45） （A58）（D6） （B11） （B19） （D7） （D8） （B30） (B38） b1a1e1 b3 c2 e4 a3 e5 e6 a4 e7 c3 e12 e11 e10 （A1）（A15） （A30） （A44） （B1）（B10） （B20） （B29） (C1)(C6) (C9) (C14) < Side View > < Bottom View: NOTE THIS IS BOTTOM VIEW > < Top View > electricimp xxxxxxxxx (A) (C) Model: Type1GC (D) (E) (B) (F)

Preliminary Specification Number : SP-UZ1GC_01-C 6 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 7 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 8 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. A38 GND GND A39 VDD_3V0_OUT PWR 3.0V output of internal LDO A40 GND GND A41 DCDC_IN PWR Input to internal PMU LDO A42 GND GND A43 VDD PWR Main power input (VBAT) A44 DCDC_OUT PWR PMU CBUCK Switching Regulator Out D4 GND GND A45 pinH I/O GPIO A46 pinK I/O GPIO/i2cJK SDA (default driven high) A47 pinJ I/O GPIO/i2cJK SCL (default driven low) A48 n/c n/c A49 pinM I/O GPIO A50 BLINKUP_DIN I Blinkup data input A51 BLINKUP_EN_L O Blinkup power enable (high = on) A52 UART0_RXD I uart0 serial input A53 UART0_RTS O uart0 request-to-send A54 UART0_CTS I uart0 clear-to-send A55 UART0_TXD O uart0 serial output A56 VDDIO_3V3 PWR I/O supply A57 VDDIO_3V3 PWR I/O supply for RMII A58 SFLASH_MISO_1 I/O Flash data bit 2 D5 n/c n/c B1 pinL I/O GPIO B2 I2C0_SCL I/O i2c0 SCL B3 GND GND B4 pinXA I/O GPIO/WAKE B5 n/c n/c B6 n/c n/c B7 n/c n/c B8 n/c n/c B9 n/c n/c B10 n/c n/c D6 n/c n/c B11 GND GND B12 RESET_L I Reset (not recommended for chip reset, see PWR_DWN_L) B13 HIB_WAKE_L I Pull-up to 3v3 B14 UART1_RXD I uart1 RXD (default driven low: note, use series resistor to limit current at boot) B15 UART1_TXD O uart1 RXD B16 n/c n/c B17 TEST_GND I Tie low

Preliminary Specification Number : SP-UZ1GC_01-C 9 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. B18 UART2_RXD I uart2 RXD (default driven low: note, use series resistor to limit current at boot) B19 pinR I/O GPIO/USB_PWR_EN D7 pinS I/O GPIO/PWM (default driven low) B20 pinXB I/O GPIO/WAKE B21 n/c I/O n/c B22 n/c I/O n/c B23 n/c I/O n/c B24 n/c I/O n/c B25 n/c I/O n/c B26 n/c I/O n/c B27 n/c I/O n/c B28 GND GND B29 GND GND D8 pinT I/O GPIO B30 SPI0_MOSI O spi0 SPI data master out B31 SPI0_MISO I spi0 SPI data master in B32 SPI0_CLK O spi0 SPI clock B33 SPI0_CS_L O spi0 SPI slave select B34 GND GND B35 Red LED O Red LED drive (CA/CC – fit 10k resistor across red LED for CA/CC detect) B36 Green LED O Green LED drive (CA/CC) B37 pinQ I/O GPIO (default driven low) B38 pinP I/O GPIO D9 GND GND C1 I2C0_SDA I/O i2c0 SDA C2 pinXC I/O GPIO/WAKE C3 pinXD I/O GPIO/WAKE C4 n/c n/c C5 PWR_DWN_L I Pull low to power chip down. Pull high to wake chip up. Use in preference to RESET_L if chip reset is desired C6 TEST_GND I Tie low D10 GND GND C7 UART2_TXD O uart2 TXD C8 GND GND D11 GND GND C9 pinU I/O GPIO/PWM (default driven low) C10 pinV I/O GPIO/PWM (default driven low) C11 pinW I/O GPIO/USB fault indication C12 VDDIO_3V3 PWR I/O supply C13 pinXE I/O GPIO/WAKE C14 pinY I/O GPIO

Preliminary Specification Number : SP-UZ1GC_01-C 10 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. D12 GND GND C15 TEST_3V3 I Tie high C16 pinN I/O GPIO E1 GND GND E2 GND GND E3 GND GND E4 GND GND E5 GND GND E6 GND GND E7 GND GND E8 GND GND E9 GND GND E10 GND GND E11 GND GND E12 GND GND

Preliminary Specification Number : SP-UZ1GC_01-C 11 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Two specific LED codes indicate errors when talking to the SPI flash: SPI flash not found SPI flash error If you encounter either of these codes, then this indicates an electrical connection issue or an incompatible flash part.

Preliminary Specification Number : SP-UZ1GC_01-C 12 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 13 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. The OS image must be loaded onto the flash before the device will operate This can be done before SMT, or in-circuit by asserting the PWR_DWM_L signal and driving the SPI bus directly; the imp005 breakout board exposes the necessary pins for this on a 0.1” header. The public cloud OS image is available for download from the imp005 design section of www.electricimp.com Note that the imp005, unlike the Murata 1GC, is pre-loaded with AES & RSA keys that will only accept firmware images signed by Electric Imp’s FIPS140-2 HSM. It is not possible to run generic WICED software on this part.

Preliminary Specification Number : SP-UZ1GC_01-C 14 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 8. Absolute Maximum Rating min. max. unit Storage Temperature -40 85 deg.C Supply Voltage Supply Voltage

Preliminary Specification Number : SP-UZ1GC_01-C 15 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 11. Power Up Sequence Following timing diagram explain module power up sequence. 32.768kHz Sleep Clock VBAT VDDIO HIB_REG_ON_IN ~2 Sleep Cycles

Preliminary Specification Number : SP-UZ1GC_01-C 16 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 17 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 13. Land pattern (Top View) Note: For PINs on the board that have a copper pour (flood) associated with it, usually the case with Ground PINs, please assure that the Land Pattern (PCB Footprint) for these PINs becomes Solder Mask Defined (SMD). In other words, the SOLDERMASK (SOLDER RESIST) for these Ground (GND) pins should be 0.550 mm x 0.250 mm (basically SODLERMASK (SOLDER RESIST) becomes same size as the PIN). 0. 125 0. 435 0. 685 0. 995 1. 245 1. 555 1. 805 2. 115 2. 365 2. 6752. 925 3. 235 3. 485 3. 795 4. 045 4. 355 4. 605 5. 00 0. 155 0. 405 0. 715 0. 965 1. 275 1. 525 1. 835 2. 085 2. 395 2. 645 2. 955 3. 205 3. 515 3. 765 4. 157 4. 707 5. 00 0. 155 0. 125 0. 375 0. 625 0. 875 1. 125 1. 375 1. 625 1. 875 5. 00 0. 405 0. 715 0. 965 1. 275 1. 525 1. 835 2. 085 2. 395 2. 645 2. 955 3. 205 5. 00 0. 125 0. 435 0. 685 0. 995 1. 245 1. 555 1. 805 2. 115 2. 365 1. 225 0. 775 0. 225 2. 749 3. 299 5. 00 1. 775 5. 00 Unit : mm 0.350 0.650SOLDERMASK(SOLDER REGIST) 0.250 0.550PIN 0.250 0.550SOLDER PASTE(STENCIL) PADSTACK INFORMATION Note: schematic and footprint symbols are available from Electric Imp for Altium & Eagle CAD packages. It is strongly recommended that you use these fully validated symbols in your design where possible.

Preliminary Specification Number : SP-UZ1GC_01-C 18 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 19 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 14.2. Blinkup circuit 14.3. Boot flash & status indication 14.4. Antenna When the Murata reference PCB antenna is used appropriately in your application, you may be able to reuse the FCC/IC modular approval of the type 1GC/imp005 module. Please contact Electric Imp for more details.

Preliminary Specification Number : SP-UZ1GC_01-C 20 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 21 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 22 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 2.0±0.1 1.75±0.10 0.30±0.05 1.7 max. (1.6±0.1) 16.0±0.1 11.5±0.1 f 1.5+0.1/-0.0 f 24.0±0.3/-0,1 feeding direction .0±0.1 10.5±0.1 1.5±0.1/-0.0 10.5±0.1 30.5 max. ( f 100) f 13 ±0.2 2.0 ± 0.5 25.5±0.6 ( f 330)

Preliminary Specification Number : SP-UZ1GC_01-C 23 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. (3) Taping Diagrams [1] Feeding Hole : As specified in (1) [2] Hole for chip : As specified in (1) [3] Cover tape : 62μm in thickness [4] Base tape : As specified in (1) (4) Leader and Tail tape [2] [3] [4] [3] [1] Feeding Hole Chip Feeding Direction Pin 1 Marking Tai l ta pe (No components) 40 to 200mm Components No components 150mm min. Leader tape (Cover tape alone) 250mm min. Feeding direction

Preliminary Specification Number : SP-UZ1GC_01-C 24 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 165 to 180 ° 1.1 N max. Base tape Cover tape 湿度 インジケ－タ 乾燥剤 表示ラべル 防湿梱包袋 表示ラベルLabel Label Desiccant Humidity Indicator Anti-humidity Plastic Bag

Preliminary Specification Number : SP-UZ1GC_01-C 25 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-UZ1GC_01-C 26 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Within 120s Pre-heating time(s) 220 deg.C Within 60s Cooling down Slowly 180 deg.C 150 deg.C 240to 250 deg.C Within 3s

Preliminary Specification Number : SP-UZ1GC_01-C 27 / 27 Preliminary & Confidential < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.