LBT10103 SIPAT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

— For IF SAW filter — High attenuation — Single-ended operation — Dual In-line Package Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 101.15 101.3 101.45 Insertion Loss dB - 24 25 1.5 dB Bandwidth MHz 5 5.06 - 3 dB Bandwidth MHz - 5.19 - 35 dB Bandwidth MHz - 5.78 5.8 40 dB Bandwidth MHz - 5.82 - 45 dB Bandwidth MHz - 5.85 6.2 50 dB Bandwidth MHz - 5.88 7 55 dB Bandwidth MHz - 5.91 15 Passband Variation dB - 1.2 1.5 Absolute Delay usec - 4.66 4.8 Ultimate Rejection(f0±15MHz) dB 55 68 - Material Temperature coefficient KHz/°C -1.82 Substrate Material - 112LT Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V 0 Input Power dBm - - 10 ESD Class - 1 Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Ag ilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show.

Tel: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com Part Number LBT10103 Rev. Date 2007-09-17 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Ver. 1.0 Page 2/3 CChhiinnaa EElleeccttrroonniiccss TTeecchhnnoollooggyy GGrroouupp CCoorrppoorraattiioonn NNoo..2266 RReesseeaarrcchh IInnssttiittuuttee 101.3MHz IF SAW Filter 5MHz Bandwidth SSIIPPAATT CCoo..,, LLttdd.. wwwwww.. ssiippaattssaaww..ccoomm Part Number: LBT10103 Matching Configuration L1=L4=47nH L2=L3=39nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension Pad Configuration: Input 1 Output 5 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT10103: Part Number 3) 07XX: Date Code INPUT OUTPUT 50Ω 50Ω 1 2 12.80 0.5 35.00 0.5 4.5 4.7 0.45 0.05 25.40 0.2 7.62 0.2 2.54 0.2 2.54 0.2 SIPAT LBT10103 07XX

Tel: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com Part Number LBT10103 Rev. Date 2007-09-17 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Ver. 1.0 Page 3/3 CChhiinnaa EElleeccttrroonniiccss TTeecchhnnoollooggyy GGrroouupp CCoorrppoorraattiioonn NNoo..2266 RReesseeaarrcchh IInnssttiittuuttee 101.3MHz IF SAW Filter 5MHz Bandwidth SSIIPPAATT CCoo..,, LLttdd.. wwwwww.. ssiippaattssaaww..ccoomm Part Number: LBT10103 Typical Performance Frequency Respond Passband Respond 90 95 100 105 110 115 -114.0752 -104.0752 -94.0752 -84.0752 -74.0752 -64.0752 -54.0752 -44.0752 -34.0752 -24.0752 -14.0752 Type Performance Frequency(MHz) Magnitude(dB) 3dB CF = 101.334MHz 1.5dB = 5.0585MHz 3dB = 5.1942MHz 35dB = 5.7787MHz 40dB = 5.8166MHz 45dB = 5.8467MHz 50dB = 5.8767MHz 55dB = 5.9053MHz Insert Loss = -24.0752dB Passband Ripple = 1.2158dB Ultimate Rejection = 54.9661dB Group Delay = 133.8822ns Phase Linearity = 17.3734deg Delay = 4.6565us 97 98 99 100 101 102 103 104 105 -26.0752 -25.5752 -25.0752 -24.5752 -24.0752 -23.5752 -23.0752 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 1MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±2.5MHz) Phase Linearity(f0±2.5MHz) 97 98 99 100 101 102 103 104 105 106 4100 4200 4300 4400 4500 4600 4700 4800 4900 5000 X: 101.3 Y: 4677 Type Performance Frequency(MHz) Group Delay Time(ns) X: 98.79 Y: 4553 X: 103.8 Y: 4558 97 98 99 100 101 102 103 104 105 106 -60 -50 -40 -30 -20 -10 X: 103.8 Y: 8.257 Type Performance Frequency(MHz) Degree(deg) X: 98.79 Y: -1.412 X: 101.3 Y: -1.224 Horizontal: 1MHz/Div Vertical: 100ns/Div Horizontal: 1MHz/Div Vertical: 10deg/Div Smith Chart S11 Smith Chart S22 0.2 0.5 1.0 2.0 5.0 +j0.2 -j0.2 +j0.5 -j0.5 +j1.0 -j1.0 +j2.0 -j2.0 +j5.0 -j5.0 0.0 ∞ 0.2 0.5 1.0 2.0 5.0 +j0.2 -j0.2 +j0.5 -j0.5 +j1.0 -j1.0 +j2.0 -j2.0 +j5.0 -j5.0 0.0 ∞