LBEE5ZZ1CK-TEMP

LBEE5ZZ1CK-TEMP MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 33

Technical content

Preliminary Specification Number : SP -ZZ1CK-E W-LAN+Bluetooth Combo Module Data Sheet Cypress Chipset for 802.11a/b/g/n/ac + Bluetooth 4.1 Tentative P/N : LBEE5ZZ1CK-TEMP Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Pr eliminary Specification Number : SP- ZZ1CK-E 1 / 32 The revision history of the product specification Revised No. Date Note - 2014/03/28 First Issue B 2015/02/11 p4:Adding tolerance p13~20:change output power C 2016/4/14 P23 :correction output power setting D 2017/3/3 Changed IC Part Number P3:Added Certification information P5:Added Label information P28:Added reference circuit P29:Added Packing information E 2017/4/12 Revised BT version P3:1. SCOPE P27:11.10 DC/RF Characteristics for Bluetooth（LE） Prel iminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 2 / 32 TABLE OF CONTENTS Please be aware that an important notice concerning availability, standard warranty and use in critical applications of Murata products and disclaimers thereto appears at the end of this specification sheet. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 3 / 32 1. SCOPE This specification is applied to the IEEE802.11a/b/g/n/ac W-LAN + Bluetooth 4.1 combo module. - IC/Firmware : Cypress CYW4339 - WLAN Host I/F : SDIO3.0 -Bluetooth Host I/F : UART - Reference Clock : 37.4MHz Crystal Oscillator embedded - ROM : Internal OTP - Weight : 2.47g - RoHS : This module is compliant with the RoHS directive. 2. Part Number Sample Part Number LBEE5ZZ1CK-TEMP 3. Block Diaglam 4. Certification Information 4.1. Radio Certification USA/Canada FCC ID : VPYLB1CK982 IC : 772C-LB1CK982 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 4 / 32 5. Dimensions，Marking and Terminal Configuration Dimensions Shield Case Internal Antenna 3.1±0.2 18±0.2 33±0.2 923.7±0.2 φ2.7 ±0.1 2.74.3±0.2 1516 9±0.2 U nit:mm Indication < connector ＞ P/N: DF17(4.0)-30DP-0.5V (mounted on Murata module) P/N: DF17(4.0)-30DS-0.5V (need to place on Customer board) Maker: HIROSE Electric Module side connector [HIROSE] DF17(4.0)-30DP-0.5V Customer side connector [HIROSE] DF17(4.0)-30DS-0.5V Customer Board Attachment Module Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 5 / 32 Marking <Top side> Marking Meaning (A) Part Number (B) FCC ID (C) IC ID (D) Trace Number (A) (B) (C) ABC (D) Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 6 / 32 Terminal Configurations No. Terminal Name Type Connection to IC Terminal Description

1 VBAT PI SR_VDDBATP5V

LDO_VDDBAT5V Power VBAT

2 VBAT PI SR_VDDBATP5V

LDO_VDDBAT5V Power VBAT

3 GND - - -

4 VIO PI

PMU_VDDIO VDDIO VDDIO_SD I/O supply for PMU, WLAN, SDIO

5 GND - - -

6 WLAN_REG_ON I WL_REG_ON

Used by PMU to power up or power down the internal CYW4339 regulators used by the WLAN section. Also, when deasserted, this pin holds the WLAN section in reset. This pin has an internal 200k ohm pull-down resistor that is enabled by default. It can be disabled through programming.

7 BT_REG_ON I BT_REG_ON

Used by PMU to power up, or power down the internal CYW4339 regulators used by BT section. Also when deasserted, this pin holds the BT/FM section in reset. This pin has an internal 200kohm pull-down resistor that is enabled by default. It can be disabled by programming.

8 WLAN_HOST_WAKE I/O GPIO_0

This pin can programmed by S/W to be a GPIO, or WLAN_HOST_WAKE output indicating that host wake-up should be performed.

9 GND - - -

10 BT_UART_RTS_N O BT_UART_RTS_N UART request-to-send. Active-low request to send signal for HCI UART I/F 11 BT_UART_TXD O BT_UART_TXD UART signal output. Serial data output for the HCI UART I/F 12 BT_UART_RXD I BT_UART_RXD UART signal input. Serial data input for the HCI UART I/F

13 BT_UART_CTS_N I BT_UART_CTS_N

UART clear_ to_send. Active low. Clear to send signal for HCI UART I/F

14 GND - - -

15 SLEEP_CLK I LPO_IN External Sleep clock input(32.768kHz)

16 GND - - -

17 BT_DEV_WAKE I/O BT_DEV_WAKE DEV_WAKE of general purpose I/O

18 BT_HOST_WAKE I/O BT_HOST_WAKE HOST_WAKE of general purpose I/O

19 GND - - 20 SDIO_D2 I/O SDIO_DATA2 SDIO Data Line 2

21 GND - - -

22 SDIO_D3 I/O SDIO_DATA3 SDIO Data Line 3

23 GND - - -

24 SDIO_CMD I/O SDIO_CMD SDIO Command Line

25 GND - - -

26 SDIO_CLK I SDIO_CLK SDIO Clock Input

No. Terminal Name Type Connection to IC Terminal Description Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 7 / 32

27 GND - - -

28 SDIO_D0 I/O SDIO_DATA0 SDIO Data Line 0

29 GND - - -

30 SDIO_D1 I/O SDIO_DATA1 SDIO Data Line 1

(1) (30) (16) (15) Terminal Configuration looked from a board implementation side of the customer Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 8 / 32 6. Rating Parameter min. max. Unit Storage Temperature -40 85 deg.C Supply Voltage VBAT 0 +5 V VIO 0 +3.9 V * Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. No damage assuming only one parameter is set at limit at a time with all other parameters are set within operating condition. 7. Operating Condition 7.1. Operating condition Parameter min. typ. max. unit Operating Temperature*1 -20 25 80 deg.C Supply Voltage VBAT 3.2 3.6 4.4 V VIO 1.71 1.8 1.89 V * Surface temperature of shield case 7.2. Power Up Sequence -VBAT should not rise 10%-90%faster than 40 microsecond. -VBAT should be up before or at the same time as V IO. VIO should NOT be present fast or be held high before VBAT is high.

7.2.1 Power On Sequence for WLAN ON and BT ON

32.768kHz Sleep Clock VBAT VDDIO WL_REG_ON BT_REG_ON 90% of VH ~2 Sleep cycle VIO Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 9 / 32

7.2.2 Power On Sequence for WLAN ON and BT OFF

32.768kHz Sleep Clock VBAT VDDIO WL_REG_ON BT_REG_ON 90% of VH ~2 Sleep cycle

7.2.3 Power On Sequence for WLAN OFF and BT ON

32.768kHz Sleep Clock VBAT VDDIO WL_REG_ON BT_REG_ON 90% of VH ~2 Sleep cycle

7.2.4 Power On Sequence for WLAN OFF and BT OFF

32.768kHz Sleep Clock VBAT VDDIO WL_REG_ON BT_REG_ON VIO VIO VIO Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 10 / 32

8 External LPO Signal Requirement

Parameter External LPO Clock Unit Nominal input frequency 32.768 kHz Frequency accuracy +/-200 ppm Duty cycle 30-70 % Input signal amplitude 200 - 1800 mVp-p Signal type Square-wave or sine-wave - Input impedance*a > 100k < 5 ohm pF Clock jitter (during initial start-up) <10,000 ppm a)When power is applied or switch off. 9. Digital I/O Requirements Digital I/O Pins Sym min. typ. max. unit SDIO Interface I/O Pins@1.8V Input high voltage VIH 1.27 - - V Input low voltage VIL - - 0.58 V Output high voltage@2mA VOH 1.40 - - V Output low voltage@2mA VOL - - 0.45 V Other Digital I/O Pins@1.8V Input high voltage VIH 0.65 x VIO - - V Input low voltage VIL - - 0.35 x VIO V Output high voltage@2mA VOH VIO-0.45 - - V Output low voltage@2mA VOL - - 0.45 V Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 11 / 32

10 Interface timing

10.1 WLAN SDIO Timing

10.1.1 SDIO Timing(Default Mode)

(a) parameters (default Mode) Parameter Symbol Min Typ Max Unit SDIO CLK (All values are referred to minimum VIH and maximum VIL(b) Frequency-Data Transfer Mode fPP 0 - 25 MHz Frequency-Identification Mode fOD 0 - 400 kHz Clock Low Time tWL 10 - - ns Clock High Time tWH 10 - - ns Clock Rise Time tTLH - - 10 ns Clock low Time tTHL - - 10 ns Inputs: CMD, DAT (referenced to CLK) Input Setup Time tISU 5 - - ns Input Hold Time tIH 5 - - ns Outputs: CMD, DAT (referenced to CLK) Output Delay time-Data Transfer Mode tODLY 0 - 14 ns Output Delay time-Identification Mode tODLY 0 - 50 ns (a). Timing is based on CL < 40pF load on CMD and Data. (b). Min (Vih) = 0.7*VIO and max (Vil) = 0.2*VIO. CLK Output Input fPP tWH tISU tIH tODLY (min) tWL tTHL tTLH tODLY (max) Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 12 / 32

10.1.2 SDIO Timing(High Speed Mode)

50% VDD SDIO Bus Timing(a) parameters (High-Speed Mode) Parameter Symbol Min Typ Max Unit SDIO CLK (All values are referred to minimum VIH and maximum VIL(b) Frequency-Data Transfer Mode fPP 0 - 50 MHz Frequency-Identification Mode fOD 0 - 400 kHz Clock Low Time tWL 7 - - ns Clock High Time tWH 7 - - ns Clock Rise Time tTLH - - 3 ns Clock low Time tTHL - - 3 ns Inputs: CMD, DAT (referenced to CLK) Input Setup Time tISU 6 - - ns Input Hold Time tIH 2 - - ns Outputs: CMD, DAT (referenced to CLK) Output Delay time-Data Transfer Mode tODLY - - 14 ns Output Hold time tOH 2.5 - - ns Total System Capacitance (each line) CL - - 40 pF (a). Timing is based on CL < 40pF load on CMD and Data. (b). Min (Vih) = 0.7*VIO and max (Vil) = 0.2*VIO.

10.1.3 SDIO timing(SDR mode)

SDIO Bus Clock Timing Parameters(SDR Modes) Parameter Symbol Min Max Unit Comments - tclk 40 - ns SDR12 mode 20 - ns SDR25 mode 10 - ns SDR50 mode 4.8 - ns SDR104 mode - tcr, tcf - 0.2xtclk ns tcr, tcf<2.00ns(max)@100MHz, Ccard=10pF tcr, tcf<0.96ns(max)@208MHz, Ccard=10pF Clock duty cycle - 30 70 % ns SDIO_ Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 13 / 32 Device Input Timing SDIO Bus Input Timing Parameters(SDR Modes) Symbol Min Max Unit CommentsUnit SDR104 Mode tis 1.4 - ns Ccard=10pF, VCT=0.975V tih 0.8 - ns Ccard=5pF, VCT=0.975v SDR50 Mode tis 3.0 - ns Ccard=10pF, VCT=0.975V tih 0.8 - ns Ccard=5pF, VCT=0.975V Device Output Timing SDR Modes up to 100MHz SDIO Bus Output Timing Parameters(SDR Modes up to 100MHz) Symbol Min Max Unit CommentsUnit todly - 7.5 ns tclk>10ns Cl=30pF using driver tyoe B for SDR50 todly - 14.0 ns tclk>20ns Cl=40pF using for SDR12, SDR25 toh 1.5 - ns Hold time at the todly(min) Cl=15pF Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 14 / 32 SDR Modes 100MHz to 208MHz SDIO Bus Output T iming Parameters(SDR Modes 100MHz up to 208MHz) Symbol Min Max Unit Comments top 0 2 UI Card output phase ⊿top -350 +1550 ps Delay variation due to temp change after tuning todw 0.60 - UI todw=2.88ns@208MHz ⊿top=+1550 ps for junction temperature of ⊿top=90 degrees during operation ⊿top=-350 ps for junction temperature of ⊿top=-20 degrees during operation ⊿top=+2600 ps for junction temperature of ⊿top=-20 to +125 degrees during operation ⊿top Consideration for Variable Data Window (SDR 104 mode) Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 15 / 32

10.1.4 SDIO Timing(DDR50 mode)

SDIO Bus Clock Timing Parameters(DDR50 Mode) parameter Symbol Min Max Unit Comments - tclk 20 - ns DDR50 mode - tcr, tcf - 0.2xtclk ns tcr, tcf<4.00ns(max)@50MHz, Ccard=10pF Clock duty cycle - 45 55 % - Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 16 / 32 Data Timing, DDR50 Mode SDIO Bus Timing Parameters(DDR50 Mode) parameter Symbol Min Max unit Comments Input CMD Input setup time tisu 6 - ns Ccard<10pF(1 Card) Input hold time tih 0.8 - ns Ccard<10pF(1 Card) Output CMD Output delay time todly - 13.7 ns Ccard<30pF(1 Card) Output hold time toh 1.5 - ns Ccard<15pF(1 Card) Input DAT Input setup time tisu2x 3 - ns Ccard<10pF(1 Card) Input hold time tih2x 0.8 - ns Ccard<10pF(1 Card) Output DAT Output delay time todly2x - 7.0 ns Ccard<25pF(1 Card) Output hold time todly2x 1.5 - ns Ccard<15pF(1 Card) Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 17 / 32

10.2 Bluetooth UART Timing

BT_UART_CTS_N BT_UART_TXD BT_UART_RXD BT_UART_RTS_N Midpoint of STOP bit Midpoint of STOP bit2 Reference Description Min Typ Max Unit 1 Delay time, UART_CTS low to UART_TXD valid - - 1.5 Bit periods 2 Setup time, UART_CTS high before midpoint of stop bit - - 0.5 Bit periods 3 Delay time, midpoint of stop bit to UART_RTS high - - 0.5 Bit periods Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 18 / 32

11 ELECTORICAL CHARACTERISTICS

11.1 DC/RF Characteristics for IEEE802.11b - 2.4G Normal Condition : 25deg.C, VBAT=3.6V. 11Mbps mode unless otherwise specified. Items Contents Specification IEEE802.11b-2.4GHz Mode DSSS / CCK Channel frequency 2412 to 2472 MHz Data rate 1, 2, 5.5,11Mbps Power setting (Tx power, in dBm) 17 Current Consumption Min. Typ. Max. unit (a) Tx mode (99% Tx mode) - - 350 mA (b) Rx mode - - 100 mA Transmitter Min. Typ. Max. Unit Power Levels 15 17 19 dBm Spectrum Mask (a) 1st side lobes - - -30 dBr (b) 2nd side lobes - - -50 dBr Power-on/off ramp - - 2.0 Usec RF Carrier Suppression 15 - dB Modulation Accuracy - - 35 % Spurious Emissions (BW=100kHz) (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz - - -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver Min. Typ. Max. Unit Minimum Input Level (FER< 8%) - - -76 dBm Maximum Input Level (FER < 8%) -10 - - dBm Adjacent Channel Rejection (FER< 8%) 35 - - dB Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

P reliminary Specification Number : SP- ZZ1CK-E 19 / 32 11.2 DC/RF Characteristics for IEEE802.11g - 2.4G Normal Condition : 25deg.C, VBAT =3.6V. 54Mbps mode unless otherwise specified. Items Contents Specification IEEE802.11g-2.4GHz Mode OFDM Channel frequency 2412 to 2472 MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps Power setting (Tx power, in dBm) 14 Current Consumption Min. Typ. Max. Unit (a) Tx mode (99% Tx mode) - - 300 mA (b) Rx mode - - 100 mA Transmitter Min. Typ. Max. Unit Power Levels 12 14 16 dBm Spectrum Mask (a) at fc +/- 11MHz - - -20 dBr (b) at fc +/- 20MHz - - -28 dBr (c) at fc > +/-30MHz - - -40 dBr Constellation Error - - -25 dB Spurious Emissions (BW=100kHz) (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz - - -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver Min. Typ. Max. Unit Minimum Input Level (PER < 10%) - - -65 dBm Maximum Input Level (PER < 10%) -20 - - dBm Adjacent Channel Rejection (FER< 10%) -1 - - dB Pre liminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 20 / 32 11.3 DC/RF Characteristics for IEEE802.11n - 2.4GHz Normal Condition : 25deg.C, VBAT =3.6V. 65Mbps (MCS7) mode unless otherwise specified. Items Contents Specification IEEE802.11n-2.4GHz Mode OFDM Channel frequency 2412 to 2472 MHz Data rate 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps Power setting (Tx power, in dBm) 13 Current Consumption Min. Typ. Max. Unit (a) Tx mode (99% Tx mode) - - 300 mA (b) Rx mode - - 100 mA Transmitter Min. Typ. Max. Unit Power Levels 11 13 15 dBm Spectrum Mask (a) at fc +/- 11MHz - - -20 dBr (b) at fc +/- 20MHz - - -28 dBr (c) at fc > +/-30MHz - - -45 dBr Constellation Error - - -27 dB Spurious Emissions (BW=100kHz) (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz - - -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver Min. Typ. Max. Unit Minimum Input Level (PER < 10%) - - -64 dBm Adjacent Channel Rejection (FER< 10%) -1 - - dB Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 21 / 32 11.4 DC/RF Characteristics for IEEE802.11a - 5GHz Normal Condition : 25deg.C, VBAT =3.6V. 54Mbps mode unless otherwise specified. Items Contents Specification IEEE802.11a-5GHz Mode OFDM Channel frequency 5180 - 5825MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps Power setting (Tx power, in dBm) 12 Current Consumption min. Typ. Max. Unit (a) Tx mode (99% Tx mode) - - 350 mA (b) Rx mode - - 110 mA Transmitter min. Typ. Max. Unit Power Levels 10 12 14 dBm Spectrum Mask (a) at fc +/- 11MHz - - -20 dBr (b) at fc +/- 20MHz - - -28 dBr (c) at fc > +/-30MHz - - -40 dBr Constellation Error - - -25 dB Spurious Emissions (BW=100kHz) (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz - - -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver min. Typ. Max. Unit Minimum Input Level (PER < 10%) - - -65 dBm Adjacent Channel Rejection (FER< 10%) -1 - - dB Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 22 / 32 11.5 DC/RF Characteristics for IEEE802.11n(HT 20MHz) - 5GHz Normal Condition : 25deg.C, VBAT =3.6V. 65Mbps (MCS7 – HT 20MHz) mode unless otherwise specified. Items Contents Specification IEEE802.11n-5GHz Mode OFDM Channel frequency 5180 - 5825MHz Data rate 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps Power setting (Tx power, in dBm) 12 Current Consumption min. Typ. Max. Unit (a) Tx mode (99% Tx mode) - - 350 mA (b) Rx mode - - 110 mA Transmitter min. Typ. Max. Unit Power Levels 10 12 14 dBm Spectrum Mask (a) at fc +/- 11MHz - - -20 dBr (b) at fc +/- 20MHz - - -28 dBr (c) at fc > +/-30MHz - - -40 dBr Constellation Error (measured at enhanced mode) - - -27 dB Spurious Emissions (BW=100kHz) (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz - - -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver min. Typ. Max. Unit Minimum Input Level (PER < 10%) - - -64 dBm Adjacent Channel Rejection (FER< 10%) -1 - - dB Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 23 / 32 11.6 DC/RF Characteristics for IEEE802.11n(HT 40MHz) - 5GHz Normal Condition : 25deg.C, VBAT =3.6V. 135Mbps (MCS7 – HT 40MHz) mode unless otherwise specified. Items Contents Specification IEEE802.11n-5GHz Mode OFDM Channel frequency 5190 - 5795MHz Data rate 13.5, 27, 40.5, 54, 81, 108, 121.5, 135Mbps Power setting (Tx power, in dBm) 11.5 Current Consumption min. Typ. Max. Unit (a) Tx mode (99% Tx mode) - - 350 mA (b) Rx mode - - 110 mA Transmitter min. Typ. Max. Unit Power Levels 9.5 11.5 13.5 dBm Spectrum Mask (a) at fc +/- 11MHz - - -20 dBr (b) at fc +/- 20MHz - - -28 dBr (c) at fc > +/-30MHz - - -40 dBr Constellation Error (measured at enhanced mode) - - -27 dB Spurious Emissions (BW=100kHz) (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz - - -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver min. Typ. Max. Unit Minimum Input Level (PER < 10%) - - -61 dBm Adjacent Channel Rejection (FER< 10%) -1 - - dB Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 24 / 32 11.7 DC/RF Characteristics for IEEE802.11ac(VHT 40MHz) - 5GHz Normal Condition : 25deg.C, VBAT =3.6V. 180Mbps (MCS9 – VHT 40MHz) mode unless otherwise specified. Items Contents Specification IEEE802.11ac-5GHz Mode OFDM Channel frequency 5190 - 5795MHz Data rate 13.5,27,40.5,54,81,108,121.5,135,160,180Mbps Power setting (Tx power, in dBm) 11.5 Current Consumption min. Typ. Max. Unit (a) Tx mode (99% Tx mode) - - 350 mA (b) Rx mode - - 130 mA Transmitter min. Typ. Max. Unit Power Levels 9.5 11.5 13.5 dBm Spectrum Mask (a) at fc +/- 21MHz - - -20 dBr (b) at fc +/- 40MHz - - -28 dBr (c) at fc > +/-60MHz - - -40 dBr Constellation Error (measured at enhanced mode) - - -32 dB Spurious Emissions (BW=100kHz) (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz - - -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver min. Typ. Max. Unit Minimum Input Level (PER < 10%) - - -54 dBm Adjacent Channel Rejection (FER< 10%) -1 - - dB Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 25 / 32 11.8 DC/RF Characteristics for IEEE802.11ac(VHT 80MHz)-5GHz Normal Condition : 25deg.C, VBAT =3.6V. 390Mbps (MCS9 – VHT 80MHz) mode unless otherwise specified. Items Contents Specification IEEE802.11ac-5GHz Mode OFDM Channel frequency 5210 - 5775MHz Power setting (Tx power, in dBm) 11 Current Consumption min. Typ. Max. Unit (a) Tx mode (99% Tx mode) - - 350 mA (b) Rx mode - - 160 mA Transmitter min. Typ. Max. Unit Power Levels 9 11 13 dBm Spectrum Mask (a) at fc +/- 41MHz - - -20 dBr (b) at fc +/- 80MHz - - -28 dBr (c) at fc > +/-120MHz - - -40 dBr Constellation Error (measured at enhanced mode) - - -32 dB Spurious Emissions (BW=100kHz) (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz - - -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver min. Typ. Max. Unit Minimum Input Level (PER < 10%) - - -51 dBm Adjacent Channel Rejection (FER< 10%) -1 - - dB Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 26 / 32

11.9 DC/RF Characteristics for Bluetooth

Normal conditions : 25 deg.C, VBAT = 3.6V Items Contents Bluetooth specification (power class) Version 2.1+EDR (Class1) Channel frequency (spacing) 2402 to 2480 MHz (1MHz) Current Consumption Min. Typ. Max. Unit (a) DH5 Packet 50% Rx/Tx slot duty cycle - - 90 mA (b) 2DH5 Packet 50% Rx/Tx slot duty cycle - - 80 mA (c) 3DH5 Packet 50% Rx/Tx slot duty cycle - - 80 mA Transmitter Min. Typ. Max. Unit Output Power *1 7 11 15 dBm Frequency range 2400 - 2483.5 MHz 20dB bandwidth - 1 MHz Adjacent Channel Power *2 (a) [M-N] =2 - - -20 dBm (b) [M-N] ≥3 - - -40 dBm Modulation characteristics (a) Modulation Δf1avg 140 - 175 kHz (b) Modulation Δf2max 115 - kHz (c) Modulation Δf2avg / Δf1avg 0.8 - - Carrier Frequency Drift (a) 1slot -25 - +25 kHz (b) 3slot / 5slot -40 - +40 kHz (c) Maximum drift rate -20 - +20 kHz/50us EDR Relative Power -4 - +1 dB EDR Carrier Frequency Stability and Modulation Accuracy (a) ωi -75 - +75 kHz (b) ωi+ωo -75 - +75 kHz (c) ωo -10 - +10 kHz (d) RMS DEVM (DQPSK) - - 20 % (e) Peak DEVM (DQPSK) - - 35 % (f) 99% DEVM (DQPSK) - - 30 % (g) RMS DEVM (8DPSK) - - 13 % (h) Peak DEVM (8DPSK) - - 25 % (i) 99% DEVM (8DPSK) - - 20 % Spurious Emissions (BW=100kHz) (a) 10MHz≦f<2387MHz - - -36 dBm (b) 2387MHz≦f<2400MHz - - -30 dBm (c) 2483.5MHz<f≦2496.5MHz - - -47 dBm (d) 2496.5MHz<f≦8GHz - - -47 dBm Receiver Min. Typ. Max. Unit Sensitivity (BER<0.1%) - - -80 dBm C/I Performance (BER<0.1%) *3 (a) co-channel - - 11 dB (b) 1MHz - - 0 dB (c) 2MHz - - -30 dB (d) 3MHz - - -40 dB (e) image (+4MHz) - - -9 dB (f) image +/- 1MHz - - -20 dB Maximum Input Level (BER<0.1%) -20 - - dBm EDR Sensitivity (BER<0.007%) (a) 8DPSK - - -77 dBm *1: Up to three spurious responses within Bluetooth limits are allowed. *2: Up to five spurious responses within Bluetooth limits are allowed. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 27 / 32

11.10 DC/RF Characteristics for Bluetooth（LE）

Normal conditions : 25 deg.C, VBAT = 3.6V Items Contents Bluetooth specification (power class) Version 4.1(LE) Channel frequency (spacing) 2402 to 2480 MHz (2MHz) Number of RF Channel 40 Item / Condition Min. Typ. Max. Unit Center Frequency 2402 - 2480 MHz Channel Spacing - 2 - MHz Number of RF channel - 40 - - Output power *1 - - 10 dBm Modulation Characteristics 1) Δf1avg 225 - 275 kHz 2) Δf2max (at 99.9%) 185 - - kHz 3) Δf2avg / Δf1avg 0.8 - - - Carrier frequency offset and drift 1) Frequency offset - - 150 kHz 2) Frequency drift - - 50 kHz 3) Drift rate - - 20 kHz Receiver sensitivity (PER < 30.8%) - - -70 dBm Maximum input signal level (PER < 30.8%) -10 - - dBm PER Report Integrity (-30dBm input) 50 - 65.4 % Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 28 / 32

12 REFERENCE CIRCUIT

WLAN_REG_ON 6 BT_REG_ON 7 WLAN_HOST_WAKE 8 GND 9 BT_UART_RTS_N 10 BT_UART_TXD 11 BT_UART_RXD 12 BT_UART_CTS_N 13 GND 14 SLEEP_CLK 15GND16 BT_DEV_WAKE17 BT_HOST_WAKE18 GND19 SDIO_D220 GND21 SDIO_D322 GND23 SDIO_CMD24 GND25 SDIO_CLK26 GND27 SDIO_D028 GND29 SDIO_D130 TYPE1CK GNDGND SLEEP_CLK_IN(32.768kHz) BT_UART_TXD BT_UART_RXD BT_UART_RTS_N BT_UART_CTS_N WLAN_HOST_WAKE BT_REG_ON WLAN_REG_ON BT_DEV_WAKE BT_HOST_WAKE VIO 4.7uF VBAT 1uF GND GND SDIO_D2 SDIO_D3 SDIO_CMD SDIO_CLK SDIO_D0 SDIO_D1 VIO 100kohm 10kohm~ Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 29 / 32

13 Packing Information

The products shall be packed in the below tray. Number of the products in the carton is 210pcs. There is the 42pcs per tray and 5pile number of the tray which stored the product. Finally, a dummy tray is put on the topmost part of trays. Packing in a inner box Shipping box Tray (5 sheets) Tray(Upper lid) Inner box cushioning module Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 30 / 32 - Please keep any packaging below 40 deg.C until using it up, because a tray is potentially deformed with storage over the temperature. - Please don’t stack the shipping box over 1.5m height to avoid any physical problem. - Four inner boxes is general num ber in a shipping box, but it may be dummy for some of inner boxes. - One inner box has 210pcs as standard q’ty. - MOQ is 840pcs, which are constructed two inner boxes. Shipping Box Inner Box Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 31 / 32 NOTICE 1. Storage Conditions : Please use this product within 6month after receipt. - The product shall be stored without opening the packing under the ambient temperature from 5 to 35deg.C and humidity from 20 to 70%RH. (Packing materials, in particular, may be deformed at the temperature over 40deg.C.) - The product left more than 6months after reception, it needs to be confirmed the solderbility before used. - The product shall be stored in non corrosive gas (Cl2, NH3, SO2, Nox, etc.). - Any excess mechanical shock including, but not limited to, sticking the packing materials by sharp object and dropping the product, shall not be applied in order not to damage the packing materials. 2. Handling Conditions : Be careful in handling or transporting products because excessive stress or mechanical shock may break products. Handle with care if products may have cracks or damages on their terminals, the characteristics of products may change. Do not touch products with bear hands that may destroy by static electrical charge. 3. Cleaning : Since this Product is Moisture Sensitive, any cleaning is not permitted. 4. Operational Environment Conditions : Products are designed to work for electronic products under normal environmental conditions (ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the similar conditions to the above-mentioned. However, if products are used under the following circumstances, it may damage products and leakage of electricity and abnormal temperature may occur. - In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.). - In an atmosphere containing combustible and volatile gases. - Dusty place. - Direct sunlight place. - Water splashing place. - Humid place where water condenses. - Freezing place. If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use. As it might be a cause of degradation or destruction to apply static electricity to products, do not apply static electricity or excessive voltage while assembling and measuring. 5. Input Power Capacity : Products shall be used in the input power capacity as specified in this specifications. Inform Murata beforehand, in case that the components are used beyond such input power capacity range. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP -ZZ1CK-E 32 / 32 PRECONDITION TO USE OUR PRODUCTS PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the products is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in pro ducts or equipment incorporating such products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WA RRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The product shall not be used in any application listed below which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree that, if you use our products in such applications, we will not be responsible for any failure to meet such requirements. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS. - Aircraft equipment. - Aerospace equipment - Undersea equipment. - Power plant control equipment - Medical equipment. - Transportation equipment (vehicles, trains, ships, elevator, etc.). - Traffic signal equipment. - Disaster prevention / crime prevention equipment. -Burning / explosion control equipment - Application of similar complexity and/ or reliability requirements to the applications listed in the above. We expressly prohibit you from analyzing, break ing, r everse-engineering, remodeling altering, and repr oducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our products or services are used. Information provided by us regarding third-party products or service s does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. By signing on specification sheet or approval sheet , you acknowledge that you are the legal representative for your company and that you understand and accept the validity of the contents herein. When you are not able to return the signed version of specification sheet or approval sheet within 30 days from receiving date of specification sheet or approval sheet, it shall be deemed to be your consent on the content of specification sheet or approval sheet. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability for damages caused by - the use of the engineering sampl e other than for evaluation purposes, particularly the installation or integration in the product to be sold by you, -deviation or lapse in function of engineering sample, -improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you can’t agree the above contents, you should inquire our sales. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.