LBEE5PA1LD-222

LBEE5PA1LD-222 MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 31

Technical content

Preliminary Specification Number : SP-PA1LD-AYLA-C Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. W-LAN Module Data Sheet Cypress for 802.11 b/g/n Chipset + STMicroelectronics MCU Tentative P/N : LBEE5PA1LD-ATEMP-AYLA MP P/N : LBEE5PA1LD-222

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 1 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. The revision history of the product specification Issued Date Revision Code Revision Page Changed Items Change Reason Jan.11.2017 - - First Issue Dec. 28,2018 A 25 13.5. Soldering Conditions: -Avoiding Confusion on cleaning modules. Oct 24, 2019 B 6,7,8 14,16,18 5.1. Dimensions and Marking 5.2. Terminal Configurations 7. Operating Condition 9. RF Characteristics 13.5. Soldering Conditions -Adding explanation for Ayla version marking -Added pin definition for Ayla on Description -Updated Specification Temperature Range, -Added Comment A. -Corrected misprints, -Modified Soldering Conditions Oct 28, 2019 C (9) All pages

5.4 Alternate Function Table

11.1 Schematic

1. Precondition To Use Our Products Footer and Watermark -Removed the section -Changed the direction to landscape -Added description for software indemnification -Removed “Confidential” indication.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 2 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. TABLE OF CONTENTS Please be aware that an important notice concerning availability, standard warranty and use in critical applications of Murata products and disclaimers thereto appears at the end of this specification sheet.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 3 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 1. Scope This specification is applied to the IEEE802.11b/g/n W-LAN + STM32F412 MCU complete module that provides connectivity to the internet via W-LAN with embedded OS that works with Ayla Networks cloud service. - IC : Cypress/CYW43438 + STMicroelectronics/STM32F412 - RoHS : This module is compliant with the RoHS directive. - MSL : 3 - MAC address : MAC address is embedded 2. Part Number Sample Part Number LBEE5PA1LD-ATEMP-AYLA MP Part Number LBEE5PA1LD-222 3. Block Diagram 4. Certification Information 4.1. USA/Canada FCC ID : VPYLB1LD IC : 772C-LB1LD *Please follow user/installation manual of Appendix 4.2. Europe EN300328 v2.1.1 conducted test report is prepared. 4.3. Japan MIC certification number is 001-P01016.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 4 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 5. Dimensions, Marking and Terminal Configurations 5.1. Dimensions and Marking b1m2 a1c2e6m3m5e8b2m6e5m4e4e3c3a2e2m1e1c1LWT e7e9 Marking Meaning A Pin 1 Marking B Murata Logo C Module Type D Inspection Number E Japan MIC certification No. F FCC ID G ISED certification No. H Mark for Ayla Networks version of Type1LD Mark Dimensions Mark Dimensions Mark Dimensions m6 0.35 +/- 0.10 (unit : mm) Structure < Side View > < Bottom View > < Top View > CYW43438 E F G A D B C H

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 5 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 5.2. Terminal Configurations <TOP VIEW> 1 2 3 4 5 678910111213141516171819202122232425262728293031323334353637383940414243444546565758596061626364474849505152535455686970656667 No. Terminal Name No. Terminal Name No. Terminal Name

1 PC15/OSC32_OUT 23 GND 45 VBAT_MCU

2 PC14/OSC32_IN 24 PA9/USART1_TX 46 GND

3 GND 25 PA10/USART1_RX 47 GND

4 VDD_WLAN 26 PA11/USART1_CTS 48 GND

5 GND 27 PA12/USART1_RTS 49 PC5

6 NC 28 PB15/SPI2_MOSI 50 WL_GPIO_1

7 NC 29 PB14/SPI2_MISO 51 WL_GPIO_2

8 NC 30 PB13/SPI2_SCK 52 WLRF_GPIO

9 NC 31 PB12/SPI2_NSS 53 CLK_REQ

10 GND 32 nRESET 54 PB9

11 RF_OUT 33 GND 55 PB10

12 GND 34 VDD_IO 56 PB8/I2S5_SD

13 GND 35 GND 57 PB1/I2S5_WS

14 PC1/WAKE 36 PC7/USART6_RX 58 PB0/I2S5_CK

15 WL_GPIO_0_HOST_WAKE 37 PC6/USART6_TX 59 PC4

16 LPO_IN 38 BOOT0 60 PB5/I2C1_SMBA

17 PA8/MCO_1 39 PA7/SPI1_MOSI 61 PB6/12C1_SCL

18 PB3/JTDO 40 PA5/SPI1_SCK 62 PB7/I2C1_SDA

19 PB4/JTRST 41 PA4/SPI1_NSS 63 PB2/BOOT1

20 PA13/JTMS 42 PA6/SPI1_MISO 64 GND

21 PA14/JTCK 43 VSSA/VREF- 65~70 GND

22 PA15/JTDI 44 VDDA_MCU - -

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 6 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. No. Terminal Name Type Connection to MCU Connection to WLAN IC Description

1 PC15/OSC32_OUT I/O PC15/OSC32_

2 PC14/OSC32_IN I/O PC14/OSC32_I

N

3 GND - GND GND Ground

4 VDD_WLAN I LDO_VBAT5V

SR_VBAT5V Power supply to WLAN IC

5 GND - GND GND Ground

6 NC -

7 NC -

8 NC -

9 NC -

10 GND - GND GND Ground

11 RF_OUT I/O RF_OUT

12 GND - GND GND Ground

13 GND - GND GND Ground

14 PC1/WAKE I/O PC1

15 WL_GPIO_0_HOST

_WAKE I/O GPIO_0

16 LPO_IN I LPO_IN

17 PA8/MCO_1 I/O PA8

18 PB3/JTDO I/O PB3

19 PB4/JTRST I/O PB4

20 PA13/JTMS I/O PA13 Ayla: SWDIO

21 PA14/JTCK I/O PA14 Ayla: SWDCLK

22 PA15/JTDI I/O PA15

23 GND - GND GND Ground

24 PA9/USART1_TX I/O PA9 Ayla MCU_UART_TX

25 PA10/USART1_RX I/O PA10 Ayla MCU_UART_RX

26 PA11/USART1_CTS I/O PA11 Ayla MCU_UART_CTSn

27 PA12/USART1_RTS I/O PA12 Ayla MCU_UART_RTSn

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 7 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

28 PB15/SPI2_MOSI I/O PB15

29 PB14/SPI2_MISO I/O PB14

30 PB13/SPI2_SCK I/O PB13

31 PB12/SPI2_NSS I/O PB12

32 nRESET I/O NRST Ayla: RESET_N

33 GND - GND GND Ground

34 VDD_IO I VDD WCC_VDDIO Power supply to WLAN IC and MCU

35 GND - GND GND Ground

36 PC7/USART6_RX I/O PC7 Ayla: CONSOLE_UART_RX

37 PC6/USART6_TX I PC6 Ayla: CONSOLE_UART_TX

38 BOOT0 I BOOT0 Internal 10kohm pull down

39 PA7/SPI1_MOSI I/O PA7 Ayla: SPI_MOSI

40 PA5/SPI1_SCK I/O PA5 Ayla: SPI_SCK

41 PA4/SPI1_NSS I/O PA4 Ayla: SPI_SSN

42 PA6/SPI1_MISO I/O PA6 Ayla: SPI_MISO

43 VSSA/VREF- I VSSA/VREF-

44 VDDA_MCU I VDDA/VREF+ Power supply to MCU

45 VBAT_MCU I VBAT Power supply to MCU

46 GND - GND GND Ground

47 GND - GND GND Ground

48 GND - GND GND Ground

49 PC5 I/O PC5

50 WL_GPIO_1 I/O GPIO_1

51 WL_GPIO_2 I/O GPIO_2

52 WLRF_GPIO I/O WLRF_GPIO Test pin. Not connected in normal operation.

53 CLK_REQ O CLK_REQ

Asserts CLK_REQ when WLAN directs the host to turn on the reference clock. The CLK_REQ polarity is active-high.

54 PB9 I/O PB9

55 PB10 I/O PB10

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 8 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

56 PB8/I2S5_SD I/O- PB8

57 PB1/I2S5_WS I/O PB1

58 PB0/I2S5_CK I/O PB0

59 PC4 I/O PC4 Ayla: READY_N

60 PB5/I2C1_SMBA I/O PB5

61 PB6/12C1_SCL I/O PB6

62 PB7/I2C1_SDA I/O PB7

63 PB2/BOOT1 I/O PB2 Connect to Ground except GPIO used

64 GND - GND GND Ground

-70 GND - GND GND Ground 5.3. Internal connection (STM32F412-CYW43438) STM32F412 CYW43438 STM32F412 X'tal (26MHz) PA0 BT_UART_RTS_N PH0 OSC_IN PA1 BT_UART_CTS_N PH1 OSC_OUT PA2 BT_UART_RXD PA3 BT_UART_TXD PC0 BT_HOST_WAKE PC2 BT_REG_ON PC3 BT_DEV_WAKE PC8 SDIO_D0 PC9 SDIO_D1 PC10 SDIO_D2 PC11 SDIO_D3 PC12 SDIO_CK PC13 WL_REG_ON PD2 SDIO_CMD *Murata platform file follow this connection.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 9 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 6. Absolute Maximum Rating min. max. unit Storage Temperature -40 85 deg.C Supply Voltage VDD_WLAN -0.3 6.0 V VDD_IO -0.3 3.9 V VBAT_MCU -0.3 4.0 V VDDA_MCU -0.4 4.0 V Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. No damage assuming only one parameter is set at limit at a time with all other parameters is set within operating condition 7. Operating Condition min. typ. max. Unit Operating Temperature Range -40 85 deg.C Specification Temperature Range -20 70 deg.C Supply Voltage VDD_WLAN 3.2 4.8* a V VDD_IO*b 1.8 3.3 3.6 V VBAT_MCU*b 1.8 3.3 3.6 V VDDA_MCU*b 1.8 3.3 3.6 V *a: Maximum continuous voltage is 4.8V. Voltages up to 6.0V for up to 10 seconds, cumulative duration over the lifetime of the device are allowed. Voltages as high as 5.0V for up to 250 seconds, cumulative duration over the lifetime of the device are allowed. *b: MCU behavior depends on input voltage. Please refer to Datasheet of STM32F412. [Note] All RF characteristics in this datasheet are defined by Specification Temperature Range.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 10 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 8. Power Up Sequence 8.1. Without nRESET control *Power down sequence is opposite sequence of power up. 8.2. With nRESET control *Power down sequence is opposite sequence of power up. *nRESET pin must be controlled by Open Drain. VDD_IO Ramp time 90% > 40µs VDD_WLAN Timing same as VDD_IO VBAT_MCU nRESET VDDA_MCU Timing same as VDD_IO VBAT_MCU Timing same as VDD_IO VDDA_MCU Timing same as VDD_IO VDD_IO Ramp time 90% > 40µs Timing same as VDD_IO VDD_WLAN Timing same as VDD_IO Timing of deassertion Reset signal same as VDD_IO

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 11 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 8.3. nRESET Circuit (1) The reset network protects the device against parasitic resets. (2) The use must ensure that the level on the nRESET pin can go below the VIL(NRST) max level specified in below table. Otherwise the reset is not taken into account by the device. (3) nRESET pin must be controlled by Open Drain. High signal must not input to this pin. Symbol Parameter Min Typ Max Unit VIL nRESET I/O input low level voltage - - 0.1VDD_IO+0.1 V nRESET(32pin) Type1L D module VDD_IO 40k 0.1uF Filter Internal Reset

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 12 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 9. RF Characteristics 9.1. RF Characteristics for IEEE802.11b Specification IEEE802.11b Mode DSSS / CCK Frequency 2400 - 2483.5MHz Data rate 1, 2, 5.5, 11Mbps Conditions 25deg.C, VDD_WLAN=3.3V, VDD_IO= 3.3V, Output power setting=17dBm, 11Mbps mode Items Contents - DC Characteristics - min. Typ. max. Unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *1 - 330 410 mA 2) Rx mode - 55 100 mA - Tx Characteristics *1 - min. Typ. max. Unit 2. Output Power 15.0 17.0 19.0 dBm 3. Spectrum Mask Margin 1) 1st side lobes(-30dBr) 0 10 - dB 2) 2nd side lobes(-50dBr) 0 6 - dB 4. Power-on and Power-down ramp - - 2.0 usec 5. RF Carrier Suppression 15 - - dB 6. Modulation Accuracy (EVM) - 18 35 % 7. Outband Spurious Emissions 1) 30MHz to 1GHz (BW=100kHz) - - -36 dBm 2) 1GHz to 12.75GHz (BW=100kHz) - - -30 dBm 3) 1.8GHz to 1.9GHz (BW=100kHz) - - -47 dBm 4) 5.15GHz to 5.3GHz (BW=100kHz) - - -47 dBm - Rx Characteristics - min. typ. max. Unit 8. Minimum Input Level Sensitivity 1) 11Mbps (FER < 8%) - -89 -76 dBm 9. Maximum Input Level (FER < 8%) -10 - - dBm 10. Adjacent Channel Rejection (FER < 8%) 35 - - dB *1: Defined when output power setting is 17dBm at Murata module antenna pad

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 13 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Conditions 25deg.C, VDD_WLAN=3.3V, VDD_IO= 3.3V, Output power setting=17dBm, 1Mbps mode Items Contents - DC Characteristics - min. Typ. max. Unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *2 - 330 410 mA 2) Rx mode - 55 100 mA - Tx Characteristics *2 - min. Typ. max. Unit 2. Output Power 15.0 17.0 19.0 dBm 3. Spectrum Mask Margin 1) 1st side lobes(-30dBr) 0 12 - dB 2) 2nd side lobes(-50dBr) 0 5 - dB 4. Power-on and Power-down ramp - - 2.0 usec 5. RF Carrier Suppression 15 - - dB 6. Modulation Accuracy (EVM) - 14 35 % 7. Outband Spurious Emissions 1) 30MHz to 1GHz (BW=100kHz) - - -36 dBm 2) 1GHz to 12.75GHz (BW=100kHz) - - -30 dBm 3) 1.8GHz to 1.9GHz (BW=100kHz) - - -47 dBm 4) 5.15GHz to 5.3GHz (BW=100kHz) - - -47 dBm - Rx Characteristics - min. typ. max. Unit 8. Minimum Input Level Sensitivity 1) 1Mbps (FER < 8%) - -96 -80 dBm 9. Maximum Input Level (FER < 8%) -4 - - dBm 10. Adjacent Channel Rejection (FER < 8%) 35 - - dB *2: Defined when output power setting is 17dBm at Murata module antenna pad

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 14 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 9.2. RF Characteristics for IEEE802.11g Specification IEEE802.11g Mode OFDM Frequency 2400 - 2483.5MHz Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps Conditions: 25deg.C, VDD_WLAN=3.3V, VDD_IO= 3.3V, Output power setting=13dBm, 54Mbps mode Items Contents - DC Characteristics - min. Typ. max. Unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *3 - 250 330 mA 2) Rx mode - 55 100 mA - Tx Characteristics*3 - min. typ. max. unit 2. Output Power 11.0 13.0 15.0 dBm 3. Spectrum Mask Margin 1) 9MHz to 11MHz (0~ -20dBr) 0 10 - dB 2) 11MHz to 20MHz (-20~ -28dBr) 0 10 - dB 3) 20MHz to 30MHz (-28~ -40dBr) 0 10 - dB 4) 30MHz to 33MHz (-40dBr) 0 10 - dB 4. Constellation Error (EVM) - -34 -25 dB 5. Outband Spurious Emissions 1) 30MHz to 1GHz (BW=100kHz) - - -36 dBm 2) 1GHz to 12.75GHz (BW=100kHz) - - -30 dBm 3) 1.8GHz to 1.9GHz (BW=100kHz) - - -47 dBm 4) 5.15GHz to 5.3GHz (BW=100kHz) - - -47 dBm - Rx Characteristics - min. typ. max. Unit 6. Minimum Input Level Sensitivity 1) 54Mbps (PER < 10%) - -76 -65 dBm 7. Maximum Input Level (PER < 10%) -20 - - dBm 8. Adjacent Channel Rejection *3: Defined when output power setting is 13dBm at Murata module antenna pad

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 15 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Conditions: 25deg.C, VDD_WLAN=3.3V, VDD_IO= 3.3V, Output power setting=17dBm, 6Mbps mode Items Contents - DC Characteristics - min. Typ. max. Unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *3 - 320 400 mA 2) Rx mode - 55 100 mA - Tx Characteristics*3 - min. typ. max. unit 2. Output Power 15.0 17.0 19.0 dBm 3. Spectrum Mask Margin 1) 9MHz to 11MHz (0~ -20dBr) 0 10 - dB 2) 11MHz to 20MHz (-20~ -28dBr) 0 10 - dB 3) 20MHz to 30MHz (-28~ -40dBr) 0 10 - dB 4) 30MHz to 33MHz (-40dBr) 0 10 - dB 4. Constellation Error (EVM) - -29 -5 dB 5. Outband Spurious Emissions 1) 30MHz to 1GHz (BW=100kHz) - - -36 dBm 2) 1GHz to 12.75GHz (BW=100kHz) - - -30 dBm 3) 1.8GHz to 1.9GHz (BW=100kHz) - - -47 dBm 4) 5.15GHz to 5.3GHz (BW=100kHz) - - -47 dBm - Rx Characteristics - min. typ. max. Unit 6. Minimum Input Level Sensitivity 1) 6Mbps (PER < 10%) - -91 -82 dBm 7. Maximum Input Level (PER < 10%) -20 - - dBm 8. Adjacent Channel Rejection *3: Defined when output power setting is 17dBm at Murata module antenna pad

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 16 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 9.3. RF Characteristics for IEEE802.11n Specification IEEE802.11n Mode OFDM Frequency 2400 - 2483.5MHz Data rate 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps Conditions: 25deg.C, VDD_WLAN=3.3V, VDD_IO= 3.3V, Output power setting=12dBm, 65Mbps(MCS7) mode Items Contents - DC Characteristics - min. Typ. max. Unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *5 - 240 320 mA 2) Rx mode - 55 100 mA - Tx Characteristics*5 - min. typ. max. Unit 2. Output Power 10.0 12.0 14.0 dBm 3. Spectrum Mask Margin 1) 9MHz to 11MHz (0 ~ -20dBr) 0 10 - dB 2) 11MHz to 20MHz (-20 ~ -28dBr) 0 10 - dB 3) 20MHz to 30MHz (-28 ~ -45dBr) 0 6 - dB 4) 30MHz to 33MHz (-45dBr) 0 6 - dB 4. Constellation Error (EVM) - -35 -27 dB 5. Outband Spurious Emissions 1) 30MHz to 1GHz - - -36 dBm 2) 1GHz to 12.75GHz - - -30 dBm 3) 1.8GHz to 1.9GHz - - -47 dBm 4) 5.15GHz to 5.3GHz - - -47 dBm - Rx Characteristics - min. typ. max. Unit 6. Minimum Input Level Sensitivity 1) 65Mbps (PER < 10%) - -73 -64 dBm 7. Maximum Input Level (PER < 10%) -20 - - dBm 8. Adjacent Channel Rejection *5: Defined when output power setting is 12dBm at Murata module antenna pad

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 17 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Conditions: 25deg.C, VDD_WLAN=3.3V, VDD_IO= 3.3V, Output power setting=17dBm, 6.5Mbps(MCS0) mode Items Contents - DC Characteristics - min. Typ. max. Unit 1. DC current 1) Tx mode (1024byte, 20usec interval) *6 - 310 390 mA 2) Rx mode - 55 100 mA - Tx Characteristics*6 - min. typ. max. Unit 2. Output Power 15.0 17.0 19.0 dBm 3. Spectrum Mask Margin 1) 9MHz to 11MHz (0 ~ -20dBr) 0 9 - dB 2) 11MHz to 20MHz (-20 ~ -28dBr) 0 9 - dB 3) 20MHz to 30MHz (-28 ~ -45dBr) 0 6 - dB 4) 30MHz to 33MHz (-45dBr) 0 6 - dB 4. Constellation Error (EVM) - -29 -5 dB 5. Outband Spurious Emissions 1) 30MHz to 1GHz - - -36 dBm 2) 1GHz to 12.75GHz - - -30 dBm 3) 1.8GHz to 1.9GHz - - -47 dBm 4) 5.15GHz to 5.3GHz - - -47 dBm - Rx Characteristics - min. typ. max. Unit 6. Minimum Input Level Sensitivity 1) 6.5Mbps (PER < 10%) - -90 -82 dBm 7. Maximum Input Level (PER < 10%) -20 - - dBm 8. Adjacent Channel Rejection *6: Defined when output power setting is 17dBm at Murata module antenna pad

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 18 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 10. Land Patterns (Top View) Unit : mm

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 19 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 11. Reference Circuit 11.1. Schematic 12345 A B C D E F G H12345A B C D E F G HPI-network attenuatorAntenna matchingRF lineX'tal*0ohm and DEPOP are for initial evaluation. Please make sure to tune "Antenna matching" and "PI-network attenuator GND GNDVDD_IOGNDGND4.7uF0.1uF VDD_WLAN32.768kHz0ohmGNDGNDVBAT_MCU45GND13GND12VDD_IO34GND33nRESET32PB12/SPI2_NSS31PB13/SPI2_SCK30PB14/SPI2_MISO29PB15/SPI2_MOSI28PA12/USART1_RTS27PA11/USART1_CTS26PA10/USART1_RX25PA9/USART1_TX24GND46PA14/JTCK21PC1/WAKE14WL_GPIO_0_HOST_WAKE15LPO_IN16PA8/MCO_117PB3/JTDO18PB4/JTRST19PA13/JTMS20PA15/JTDI22GND23RF_OUT11GND10GND5VDD_WLAN4GND3PC14/OSC32_IN2PC15/OSC32_OUT1GND65-70GND35PC7/USART6_RX36PC6/USART6_TX37BOOT038PA7/SPI1_MOSI39PA5/SPI1_SCK40PA4/SPI1_NSS41PA6/SPI1_MISO42VSSA/VREF-43VDDA_MCU44GND47GND48PC549WL_GPIO_150WL_GPIO_251WLRF_GPIO52CLK_REQ53PB954PB1055GND64PB2/BOOT163PB7/I2C1_SDA62PB5/I2C1_SMBA60PC459PB0/I2S5_CK58PB1/I2S5_WS57PB8/I2S5_SD56PB6/I2C1_SCL61NC9NC8NC7NC6LBEE5PA1LD-AYLAU1JTDOJTRSTJTCKJTDIUSART1_TXUSART1_RXUSART1_CTSUSART1_RTSnRESETPB2/BOOT1PC4BOOT0USART6_TXUSART6_RXI2C1_SCLI2C1_SDAI2C1_SMBAI2S5_CKI2S5_WSI2S5_SDPC5WL_GPIO_1WL_GPIO_2WLRF_GPIOPB9PB10RF_OUTJTMSSPI2_MOSISPI2_MISOSPI2_SCKSPI2_NSSSPI1_MOSISPI1_SCKSPI1_NSSSPI1_MISOCLK_REQRF_OUTPC15/OSC32_OUTPC14/OSC32_INPC15/OSC32_OUTPC14/OSC32_IN

Preliminary Specification Number : SP-PA1LD-AYLA-C Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 12. Tape and Reel Packing (1) Dimensions of Tape (Plastic tape) *1. Cumulative tolerance of max. 40.0 ± 0.15 every 10 pitches (Unit : mm) (2) Dimensions of Reel Φ13±2 2±0.5 (Φ100) (Φ330) 17.5 22.5 max. (unit : mm) 2.0±0.1 1.75±0.1 0.30±0.05 1.3±0.1 16.0±0.1 7.5±0.1  1.5+0.1/-0 16.0±0.2 feeding direction 4 .0±0.1 8.2±0.05 1.5±0.1 9.3±0.05

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 21 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. (3) Taping Diagrams [1] Feeding Hole : As specified in (1) [2] Hole for chip : As specified in (1) [3] Cover tape : 62μm in thickness [4] Base tape : As specified in (1) (4) Leader and Tail tape Feeding Hole Chip Feeding Direction Pin 1 Marking Tail tape (No components) 40 to 200mm Components No components 150mm min. Leader tape (Cover tape alone) 250mm min. Feeding direction [2] [3] [4] [3] [1]

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 22 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. (5) The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled toward the user. (6) The cover tape and base tape are not adhered at no components area for 250mm min. (7) Tear off strength against pulling of cover tape : 5N min. (8) Packaging unit : 1000pcs./ reel (9) material : Base tape : Plastic Real : Plastic Cover tape, cavity tape and reel are made the anti-static processing. (10) Peeling of force : 1.1N max. in the direction of peeling as shown below. (11) Packaging (Humidity proof Packing) Tape and reel must be sealed with the anti-humidity plastic bag. The bag contains the desiccant and the humidity indicator. 165 to 180 ° 1.1 N max. Base tape Cover tape 湿度インジケ－タ 乾燥剤 表示ラべル 防湿梱包袋 表示ラベルLabel Label Desiccant Humidity Indicator Anti-humidity Plastic Bag

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 23 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 13. NOTICE 13.1. Storage Conditions: Please use this product within 6month after receipt. - The product shall be stored without opening the packing under the ambient temperature from 5 to 35deg.C and humidity from 20 to 70%RH. (Packing materials, in particular, may be deformed at the temperature over 40deg.C.) - The product left more than 6months after reception, it needs to be confirmed the solderbility before used. - The product shall be stored in non corrosive gas (Cl2, NH3, SO2, Nox, etc.). - Any excess mechanical shock including, but not limited to, sticking the packing materials by sharp object and dropping the product, shall not be applied in order not to damage the packing materials. This product is applicable to MSL3 (Based on JEDEC Standard J-STD-020) - After the packing opened, the product shall be stored at <30deg.C / <60%RH and the product shall be used within 168hours. - When the color of the indicator in the packing changed, the product shall be baked before soldering. Baking condition: 125+5/-0deg.C, 24hours, 1time The products shall be baked on the heat-resistant tray because the material (Base Tape, Reel Tape and Cover Tape) are not heat-resistant. 13.2. Handling Conditions: Be careful in handling or transporting products because excessive stress or mechanical shock may break products. Handle with care if products may have cracks or damages on their terminals, the characteristics of products may change. Do not touch products with bear hands that may result in poor solder ability and destroy by static electrical charge. 13.3. Standard PCB Design (Land Pattern and Dimensions): All the ground terminals should be connected to the ground patterns. Furthermore, the ground pattern should be provided between IN and OUT terminals. Please refer to the specifications for the standard land dimensions. The recommended land pattern and dimensions is as Murata's standard. The characteristics of products may vary depending on the pattern drawing method, grounding method, land dimensions, land forming method of the NC terminals and the PCB material and thickness. Therefore, be sure to verify the characteristics in the actual set. When using non-standard lands, contact Murata beforehand. 13.4. Notice for Chip Placer: When placing products on the PCB, products may be stressed and broken by uneven forces from a worn-out chucking locating claw or a suction nozzle. To prevent products from damages, be sure to follow the specifications for the maintenance of the chip placer being used. For the positioning of products on the PCB, be aware that mechanical chucking may damage products.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 24 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 13.5. Soldering Conditions: The recommendation conditions of soldering are as in the following figure. Soldering must be carried out by the above mentioned conditions to prevent products from damage. Set up the highest temperature of reflow within 260 °C. Contact Murata before use if concerning other soldering conditions. Reflow soldering standard conditions (Example) Please use the reflow within 2 times. Use rosin type flux or weakly active flux with a chlorine content of 0.2 wt % or less. 13.6. Cleaning: Since this Product is Moisture Sensitive, any cleaning is not permitted. 13.7. Operational Environment Conditions: Products are designed to work for electronic products under normal environmental conditions (ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the similar conditions to the above-mentioned. However, if products are used under the following circumstances, it may damage products and leakage of electricity and abnormal temperature may occur. - In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.). - In an atmosphere containing combustible and volatile gases. - Dusty place. - Direct sunlight place. - Water splashing place. - Humid place where water condenses. - Freezing place. If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use. As it might be a cause of degradation or destruction to apply static electricity to products, do not apply static electricity or excessive voltage while assembling and measuring. Within 120s Pre-heating time(s) 220 deg.C Within 60s Cooling down Slowly 180 deg.C 150 deg.C 250 deg.C Within 10s Tpeak-5deg.C

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 25 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 13.8. Input Power Capacity: Products shall be used in the input power capacity as specified in this specification. Inform Murata beforehand, in case that the components are used beyond such input power capacity range. 13.9. Errata on MCU Please refer the errata documents of STM32F412 on the following site. http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f4- series/stm32f412/stm32f412rg.html The site address may change without notices.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 26 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 14. PRECONDITION TO USE OUR PRODUCTS PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. - Aerospace equipment - Undersea equipment. - Power plant control equipment - Medical equipment. - Transportation equipment (vehicles, trains, ships, elevator, etc.). - Traffic signal equipment. - Disaster prevention / crime prevention equipment. - Burning / explosion control equipment - Application of similar complexity and/ or reliability requirements to the applications listed in the above.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 27 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 28 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. APPENDIX

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 29 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. User Manual Model Number : Type1LD FCC ID, and IC Number for this product is as follows. FCC ID: VPYLB1LD IC: 772C-LB1LD For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. This device complies with part 15 of FCC Rules and Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

• Please describe the following warning to the manual.
• When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.
• When installing it in a portable equipment. FCC：Class II permissive change application and SAR test are necessary. IC： Class II permissive change application and SAR test are necessary. Please contact Murata. Contains Transmitter Module FCC ID:VPYLB1LD or Contains FCC ID: VPYLB1LD Contains IC: 772C-LB1LD ※When the product is small, as for these words mentioned above, the posting to a manual is possible. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm.

Preliminary Specification Number : SP-PA1LD-AYLA-C P. 30 / 30 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Installation Manual Model Number : Type1LD

Contents

1. Operational Discription (Frequency, Output power) 2. Antenna Design 1.Operational Discription  Operational Systems WLAN: 802.11b/g/n(HT20)  Operating Frequencies WLAN: 2412 – 2462 MHz  Setting Output Powers WLAN: Show right table 2. Antenna Discription We got approval by the antenna in the pattern of the figure. When using our authorization ID, it is necessary to use an equivalent antenna pattern. Used for tuning antenna gain * Antenna peak gain should be 0 dBi or less