LBC3225T3R3MR

LB1608T1R0M TAIYO-YUDEN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 47

Technical content

notice_e-01 Notice for TAIYO YUDEN productsɹ Please read this notice before using the TAIYO YUDEN products. REMINDERS ˙ Product informati on in this catalog is as of October 2009. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be - fore prac tical application or usage of the Products. Plea s e note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo - rating such products, which are caused under the conditions other than those specified in this catalog or individual specifi cation. ˙ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is availa ble. ˙ Please conduct validation and verification of products in actual condition of mounting and operating environment before co mmercial shipment of the equipment. ˙ All e lectronic components or functional modules listed in this catalog are developed, designed and intended for use in g eneral electronics equipment.(for AV, office automation, household, office supply, information service, teleco mmunications, (suc h as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disast er prevention, medical, public information network (telephone exchange, base station) etc. which may have direct i nfluence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do no t incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma - rine sys tem, military, etc. where higher safety and reliability are especially required. In ad d ition, even electronic components or functional modules that are used for the general electronic equipment, if the e quipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil - ity eva luation check for safety shall be performed before commercial shipment and moreover, due consideration to instal l a protective circuit is strongly recommended at customer's design stage. ˙ The c ontents of this catalog are applicable to the products which are purchased from our sales offices or distribu - tors (so c alled ʠTAIYO YU DENʟs official sales channel ʡ). It is only applicable to the products purchased from any of TAIYO YUDEN ʟ s officia l sales channel. ˙ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc - cur in c onnection with a third party's intellectual property rights and other related rights arising from your usage of produc ts in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. ˙ Caut ion for export Cert a in items in this catalog may require specific procedures for export according to ʠForeig n Exchange and For - eign Trade Control Law ʡ of Ja p an, ʠU.S. Export Administration Regulations ʡ, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. Shou l d you have any question or inquiry on this matter, please contact our sales staff.

42 wound01_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS/STANDARD QUANTITY ■ AVAILABLE CAPACITANCE RANGE ■ APPLICATIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Surface Mounting ・ Mounting and soldering con - ditions should be checked before hand. ・ Applicable solder ing process to those products is reflow solder ing only. ・ Recommended Land Patterns EXTERNAL DIMENSIONS Wound Chip Inductors cover customers' wide range module designs by wide-line-up shape, standard, low Rdc, and high electric current series. ◦ LB/LBR Series：Super lo w Rdc and high Idc characteristics. ◦ LB3218 Series ：This s e ries is downsized from 3225 size. Land pat - tern can be used by 3225 size. ◦LBMF16 The best efficiency design is achieved by adopting bottom-surface elec - trode structure. B ecause of 1608 shape, it can be high-density mounting. ◦ DSC/DVC/HDD, LCD, portable telephones, game equipments. Various audio-visual equipments, various communication equipments, etc. WOUND CHIP INDUCTORS (LB SERIES) L B △ 2 0 1 2 T 1 0 0 △ △ △ △ △ ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ Type L W T e Standard Quantity [pcs] Paper Ta pe Embossed Tape LBC 3225 3.2±0.2 （0.128±0.008） 2.5±0.2 （0.098±0.008） 2.5±0.2 （0.098±0.008） 0.6±0.3 LB3218 3.2±0.2 （0.128±0.008） 1.8±0.2 （0.071±0.008） 1.8±0.2 （0.071±0.008） 0.6±0.2 LB2518 LBC2518 LBR2518 2.5±0.2 （0.098±0.008） 1.8±0.2 （0.071±0.008） 1.8±0.2 （0.071±0.008） 0.5±0.2 LB2016 LBC2016 2.0±0.2 （0.079±0.008） 1.6±0.2 （0.063±0.008） 1.6±0.2 （0.063±0.008） 0.5±0.2 LB2012 LBC2012 LBR2012 2.0±0.2 （0.079±0.008） 1.25±0.2 （0.049±0.008） 1.25±0.2 （0.049±0.008） 0.5±0.2 LB1608 1.6±0.1 （0.063±0.004） 0.8±0.1 （0.031±0.004） 0.8±0.1 （0.031±0.004） 0.35±0.15 LBMF1608 1.6±0.2 （0.063±0.008） 0.8±0.2 （0.031±0.008） 0.8±0.2 （0.031±0.008） 0.45±0.15 Unit：mm（inch） ❶Type LB Wound chip inductor ❽Internal code △△△ Standard Produc ts △＝Blank space ❼Special code △ Standard produc ts R Low Rdc type ❸External Dimensions 〔mm〕 1608（0603） 1.6×0.8 2016（0806） 2.0×1.6 518（1007） 2.5×1.8 218（1207） 3.2×1.8 225（1210） 3.2×1.5 ❺Nominal Inductance〔μH〕 example 1R0 1 100 10 101 100 ※R=decimal point ❷Shape △ Standard products C High cur rent R Low Rdc MF B otto m-surface electr ode ❻Inductance Tolerances 〔％〕 K ±10 M ±20 ❹Packaging T Tape & Reel Unit：mm TYPE A B C 1608 0.55 0.7 1.0 MF1608 0.55 0.8 0.9 2012 0.7 0.8 1.45 2016 0.7 0.8 1.8 2518 0.8 1.2 2.0 3218 1.0 1.6 2.0 3225 1.0 1.6 2.0 A A C B REFLOW Range Type LB3218 LB2518 LB2016 LB2012 LB1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 LBMF1608 340 0.25 165 0.25 155 0.5 120 0.7 70 0.55 100 140 2.40 60 2.1 40 4.5 45 7.0 10μH 150 1.4 125 3.70 75 8.0 90 5.8 80 1.89 50 4.0 35 2.5 47μH 47μH 1000 40 27 15 24 100μH 100μH 100μH 680μ H 28.0 100μH 100μH 100μH 680μH 1000μH 1000μH Inductance ［μH］

43wound01_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• LB1608 TYPE
• LB2012 TYPE
• LB2016 T YPE
• LB2518 T YPE Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB 1 608T1R0M RoHS 1.0 100 0.17 160 7.96LB 1608T2R2M RoHS 2.2 8 0 0.33 115 LB 1608T4R7M RoHS 4.7 4 5 0.55 70 LB 1608T8R2M RoHS 8.2 3 2 0.70 60 2.52LB 1608T100M RoHS 10 32 0 .70 60 Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB 2 012T1R0M RoHS 1.0 100 0.15 405 7.96 LB 2012T2R2M RoHS 2.2 8 0 0.23 260 LB 2012T3R3M RoHS 3.3 5 5 0.30 235 LB 2012T4R7M RoHS 4.7 4 5 0.40 190 LB 2012T6R8M RoHS 6.8 3 8 0.47 135 LB 2012T100□ RoHS 10 ±10 ±20% 32 0.70 120 2.52 LB 2012T100□R RoHS 10 32 0 .50 120 LB 2012T150□ RoHS 15 28 1 .3 100 LB 2012T220□ RoHS 22 16 1 .7 80 LB 2012T470□ RoHS 47 11 3 .7 60 LB 2012T680□ RoHS 68 10 6 .0 50 LB 2012T101□ RoHS 100 8 7 .0 45 0.796 Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB 2 016T1R0M RoHS 1.0 100 0.09 490 7.96 LB 2016T1R5M RoHS 1.5 8 0 0.11 380 LB 2016T2R2M RoHS 2.2 7 0 0.13 375 LB 2016T3R3M RoHS 3.3 5 5 0.20 285 LB 2016T4R7M RoHS 4.7 4 5 0.25 225 LB 2016T6R8M RoHS 6.8 3 8 0.35 200 LB 2016T100□ RoHS 10 ±10 ±20% 32 0.50 155 2.52 LB 2016T150□ RoHS 15 28 0 .70 130 LB 2016T220□ RoHS 22 16 1 .0 105 LB 2016T330□ RoHS 33 14 1 .7 85 LB 2016T470□ RoHS 47 11 2 .4 70 LB 2016T680□ RoHS 68 10 3 .0 55 LB 2016T101□ RoHS 100 8 4 .5 40 0.796 Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB 2 518T1R0M RoHS 1.0 100 0.06 665 7.96 LB 2518T1R5M RoHS 1.5 8 0 0.07 405 LB 2518T2R2M RoHS 2.2 6 8 0.09 340 LB 2518T3R3M RoHS 3.3 5 4 0.11 280 LB 2518T4R7M RoHS 4.7 4 6 0.13 240 LB 2518T4R7MR RoHS 4.7 4 6 0.10 235 LB 2518T6R8M RoHS 6.8 3 8 0.15 195 LB 2518T100□ RoHS 10 ±10 ±20% 30 0.25 165 2.52 LB 2518T150□ RoHS 15 23 0 .32 145 LB 2518T220□ RoHS 22 19 0 .50 115 LB 2518T330□ RoHS 33 15 0 .70 95 LB 2518T470□ RoHS 47 12 0 .95 85 LB 2518T680□ RoHS 68 9. 5 1.5 70 LB 2518T101□ RoHS 100 9 .0 2.1 60 0.796 LB 2518T151□ RoHS 150 7 .0 3.2 45 LB 2518T221□ RoHS 220 5 .5 4.5 40 LB 2518T331□ RoHS 330 4 .5 7.0 30 LB 2518T471□ RoHS 470 3 .5 10 25 LB 2518T681□ RoHS 680 3.0 17 20 LB 2518T102□ RoHS 100 0 2.4 24 15 0.252 ・□Please specify the Inductance tolerance code （K or M）

44 wound01_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• LB3218 TYPE
• LBMF1608 TYPE
• LBC251

8 TYPE

（Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB 3 218T1R0M RoHS 1.0 100 0.06 1075 7.96 LB 3218T1R5M RoHS 1.5 8 0 0.07 860 LB 3218T2R2M RoHS 2.2 6 8 0.09 775 LB 3218T3R3M RoHS 3.3 5 4 0.11 560 LB 3218T4R7M RoHS 4.7 4 1 0.13 550 LB 3218T6R8M RoHS 6.8 4 0 0.17 380 LB 3218T100□ RoHS 10 ±10 ±20% 30 0.25 340 2.52 LB 3218T150□ RoHS 15 25 0 .32 300 LB 3218T220□ RoHS 22 19 0 .49 255 LB 3218T330□ RoHS 33 15 0 .75 215 LB 3218T470□ RoHS 47 12 0 .92 205 LB 3218T680□ RoHS 68 11 1 .49 145 LB 3218T101□ RoHS 100 8 .0 2.4 140 0.796 LB 3218T151□ RoHS 150 7 .0 3.2 105 LB 3218T221□ RoHS 220 5 .0 5.4 80 LB 3218T331□ RoHS 330 4 .0 7.0 65 LB 3218T471□ RoHS 470 3 .5 14 54 LB 3218T681□ RoHS 680 3 .0 17 45 LB 3218T102□ RoHS 1000 2.4 27 39 0.252 Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LBM F1608T1R0M RoHS 1.0 ±20% 100 0.09 230 7.96LBMF1608T2R2M RoHS 2.2 80 0.17 160 LBMF1608T3R3M RoHS 3.3 60 0.22 130 LBMF1608T4R7M RoHS 4.7 45 0.24 110 LBMF1608T100 □ RoHS 10 ±10% ±20% 32 0.36 80 2.52LBMF1608T220 □ RoHS 22 16 1.0 50 LBMF1608T470□ RoHS 47 11 2.5 35 Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB C 2518T1R0M RoHS 1.0 100 0.08 775 7.96 LB C2518T1R0MR RoHS 1.0 1 00 0.065 890 LB C2518T1R5M RoHS 1.5 8 0 0.11 730 LB C2518T2R2M RoHS 2.2 6 8 0.13 630 LB C2518T3R3M RoHS 3.3 5 4 0.16 560 LB C2518T4R7M RoHS 4.7 4 1 0.20 510 LB C2518T6R8M RoHS 6.8 3 8 0.30 420 LB C2518T100□ RoHS 10 ±10 ±20% 30 0.36 375 2.52 LB C2518T150□ RoHS 15 23 0 .65 285 LB C2518T220□ RoHS 22 19 0 .77 250 LB C2518T330□ RoHS 33 15 1 .5 185 LB C2518T470□ RoHS 47 12 1 .9 165 LB C2518T680□ RoHS 68 9. 5 2.8 140 LB C2518T101□ RoHS 100 9 .0 3.7 125 0.796 LB C2518T151□ RoHS 150 7 .0 6.1 95 LB C2518T221□ RoHS 220 5 .5 8.4 80 LB C2518T331□ RoHS 330 4 .5 12.3 65 LB C2518T471□ RoHS 470 4 .5 22 50 LB C2518T681□ RoHS 680 3.0 28 45 ・□Please specify the Inductance tolerance code （K or M）

• LBC3225 TYPE Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB C 3225T1R0MR RoHS 1.0 250 0.055 1100 0.1 LB C3225T1R5MR RoHS 1.5 2 20 0.060 1000 LB C3225T2R2MR RoHS 2.2 1 90 0.080 930 LB C3225T3R3MR RoHS 3.3 1 60 0.095 820 LB C3225T4R7MR RoHS 4.7 7 0 0.100 680 LB C3225T6R8MR RoHS 6.8 5 0 0.120 620 LB C3225T100 □R RoHS 10 ±10 ±20% 23 0.133 540 LB C3225T150□R RoHS 15 20 0 .195 420 LB C3225T220 □R RoHS 22 17 0 .270 330 LB C3225T330 □R RoHS 33 13 0 .410 300 LB C3225T470□R RoHS 47 10 0 .670 220 LB C3225T680 □R RoHS 68 8 1. 00 190 LB C3225T101□R RoHS 100 6 1 .40 150

45wound01_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• LBC2016 TYPE
• LBC2012 TYPE
• LBR251
• LBR201

2 TYPE

（Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB C 2016T1R0M RoHS 1.0 100 0.10 690 7.96 LB C2016T1R5M RoHS 1.5 8 0 0.15 600 LB C2016T2R2M RoHS 2.2 7 0 0.20 520 LB C2016T3R3M RoHS 3.3 5 5 0.27 410 LB C2016T4R7M RoHS 4.7 4 5 0.37 355 LB C2016T6R8M RoHS 6.8 3 8 0.59 290 LB C2016T100□ RoHS 10 ±10 ±20% 32 0.82 245 2.52 LB C2016T150□ RoHS 15 28 1 .2 200 LB C2016T220□ RoHS 22 16 1 .8 165 LB C2016T330 □ RoHS 33 14 2 .8 135 LB C2016T470□ RoHS 47 11 4 .3 110 LB C2016T680□ RoHS 68 10 7 .0 95 LB C2016T101□ RoHS 100 8 8 .0 75 0.796 Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB C 2012T1R0M RoHS 1.0 100 0.19 620 7.96LB C2012T2R2M RoHS 2.2 7 0 0.33 430 LB C2012T4R7M RoHS 4.7 4 5 0.50 295 LB C2012T100□ RoHS 10 ±10 ±20% 40 1.2 200 2.52LB C2012T220□ RoHS 22 16 3 .7 130 LB C2012T470□ RoHS 47 11 5 .8 90 Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB R 2518T1R0M RoHS 1.0 100 0.045 960 7.96LB R2518T2R2M RoHS 2.2 6 8 0.07 480 LB R2518T4R7M RoHS 4.7 4 5 0.10 345 LB R2518T100□ RoHS 10 ±10 ±20% 30 0.19 235 2.52LB R2518T220□ RoHS 22 19 0 .44 175 LB R2518T470□ RoHS 47 11 0 .84 120 LB R2518T101□ RoHS 100 9 1 .89 80 0.796 Ordering code EHS （Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕min. DC Resist ance Rate d current 〔mA〕 max. M easur ing freque ncy 〔MHz〕 LB R 2012T1R0M RoHS 1.0 100 0.07 400 7.96LB R2012T2R2M RoHS 2.2 8 0 0.13 260 LB R2012T4R7M RoHS 4.7 4 5 0.24 200 LB R2012T100□ RoHS 10 ±10 ±20% 32 0.36 150 2.52LB R2012T220□ RoHS 22 16 1 .0 100 LB R2012T470□ RoHS 47 11 1 .7 75 LB R2012T101□ RoHS 100 8 4 .0 50 0.796 ・□Please specify the Inductance tolerance code （K or M）

46 wound01_e-01 ■ ELECTRICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Impedance ʤЊʥ Frequency ʤMHzʥ LB2016 1 1 0 10000 100 1000 100000 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ LB2518 1 1 0 100 10000 1000 100000 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ LB3218 1 1 0 100 10000 1000 100000 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ LBC2012 1 1 0 10000 100 1000 100000 100 100001000 1R0M 470˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ LBC2016 1 1 0 10000 1000 100 100000 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ LBC2518 1 1 0 10000 100 1000 100000 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ LBR2012 1 1 0 1000 10000 100 100000 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ LBR2518 1 1 0 1000 10000 100 100000 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ LBMF1608 1 1 0 100 10000 1000 100000 100 1000 10000 4R7M 100˘ 470˘ Standard Type High Current Type Bottom-surface electrode TypeLow Rdc Type Inductance ʤЖHʥ DC Bias ʤmAʥ LB1608 1 1 0 0.1 100 100 1000 1R0M 100M Inductance ʤЖHʥ DC Bias ʤmAʥ LB2012 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LB2016 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LB2518 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LB3218 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LBC2012 1 1 0 0.1 100 100 1000 1R0M 470˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LBC2016 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LBC2518 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LBR2012 1 1 0 100 1000 100 1000 1R0M 101˘ 100˘ Standard Type Standard Type High Current Type Low Rdc Type Bottom-surface electrode Type Standard Type ■DC Bias characteristics （Measured by HP4285A＋42841A） ■Impedance-vs-Frequency characteristics （Measured by HP4291A） Impedance ʤЊʥ Frequency ʤMHzʥ LB1608 1 1 0 1000 100 10000 100 100001000 1R0M 100M Inductance ʤЖHʥ DC Bias ʤmAʥ LBR2518 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ LB2012 1 1 0 10000 100 1000 100000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LBMF1608 1 1 0 0.1 100 1000 1R0M 100˘ 4R7M Inductance ʤЖHʥ DC Bias ʤmAʥ ̡ ̗ ̘3225 1 1 0 0.1 100 100 100001000 101˘̧ 100˘̧ 1R0MR High Current Type Impedance ʤЊʥ Frequency ʤMHzʥ LBC3325 1 1 0 0.1 0.1 10000 100 1000 100000 100 100001000 101˘R 100˘R 1R0MR High Current Type

48 wound02_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS/STANDARD QUANTITY ■ AVAILABLE CAPACITANCE RANGE ■ APPLICATIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Recommended Land Patterns Surface Mounting ・ Mounting and soldering con- Mounting and soldering con - ditions should be checked beforehand. ・ Applicable solder ing process to those products is reflow solder ing only. ・ Recom mended Land Patterns ◦ This series corresponds to high electric current compared with LB/ LBC seri es. Wound Chip Inductors that can be used for small DC/DC converters and are su itable for choke uses. ◦ CBMF 160

8 Series

st efficiency design is achieved by adopting bottom-surface electr ode structure. Wound Chip Inductors that are suitable for module design which needs hi gh electric current like DC/DC converters. ◦ DSC/DVC /HDD, LCD, portable telephones, game equipment. Vari o us audio-visual equipment, various communication equipment, etc. WOUND CHIP POWER INDUCTORS (CB SERIES) C B △ 2 0 1 2 T 1 0 0 △ △ △ △ △ ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ Type L W T e Standard Quantity [pcs] Paper Ta pe Embossed Tape CBC 3225 3.2±0.2 （0.126±0.008） 2.5±0.2 （0.098±0.008） 2.5±0.2 （0.098±0.008） 0.6±0.3 CB2518 CBC2518 2.5±0.2 （0.098±0.008） 1.8±0.2 （0.071±0.008） 1.8±0.2 （0.071±0.008） 0.5±0.2 CB2016 CBC2016 2.0±0.2 （0.079±0.008） 1.6±0.2 （0.063±0.008） 1.6±0.2 （0.063±0.008） 0.5±0.2 CB2012 CBC2012 2.0±0.2 （0.079±0.008） 1.25±0.2 （0.049±0.008） 1.25±0.2 （0.049±0.008） 0.5±0.2 CBL2012 2.0±0.2 （0.079±0.008） 1.25±0.2 （0.049±0.008） 0.9±0.1 （0.035±0.004） 0.5±0.2 CBMF1608 1.6±0.2 （0.063±0.2） 0.8±0.2 （0.031±0.008） 0.8±0.2 （0.031±0.008） 0.45±0.15 Unit：mm（inch） ❶Type CB Wound chip power inductor ❽Internal code △△△ Standard Produc ts △＝Blank space ❼Special code △ Standard produc ts R Low Rdc type ❸External Dimensions 〔mm〕 1608（0603） 1.6×0.8 2016（0806） 2.0×1.6 518（1007） 2.5×1.8 225（1210） 3.2×2.5 ❺Nominal Inductance〔μH〕 exampl e 1R0 1 100 10 101 100 ※R=decimal point ❷Characteristic Spec △ Low Rdc C High cur rent L Low profi le MF Botto m-surface elect r ode ❻Inductance Tolerances〔％〕 K ±10 M ±20 ❹Packaging T Tape & Reel Unit：mm TYPE A B C 1608 0.55 0.7 1.0 MF1608 0.55 0.8 0.9 2012 0.7 0.8 1.45 2016 0.7 0.8 1.8 2518 0.8 1.2 2.0 3225 1.0 1.6 2.0 A A C B Range Type CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBC2012 CBMF1608 Inductance ［μH］ 100 60 2.1 70 4.5 60 7 270 1.4 160 3.7 110 8 47μH 47μH 47μH 1000 25 24 100μH 100μH 100μH 65 28 100μH 680μH 1000μH REFLOW

49wound02_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• CB2012 TYPE
• CBC2012 TYPE
• CB2016 T YPE
• CB2518 T YPE Ordering code EHS （Environmental Hazardous Substances） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Satura tion current Idc1 Temperature rise current Idc2 CB 2012T1R0M RoHS 1.0 ±20% 100 0.15 500 900 7.96 CB 2012T2R2M RoHS 2.2 80 0.23 410 770 CB 2012T3R3M RoHS 3.3 55 0.30 330 650 CB 2012T4R7M RoHS 4.7 45 0.40 300 580 CB 2012T6R8M RoHS 6.8 38 0.47 250 540 CB 2012T100□ RoHS 10 ±10% ±20% 32 0.70 190 440 2.52 CB 2012T100□R RoHS 10 32 0.50 200 520 CB 2012T150□ RoHS 15 28 1.3 170 320 CB 2012T220□ RoHS 22 16 1.7 135 280 CB 2012T470□ RoHS 47 11 3.7 90 190 CB 2012T680 □ RoHS 68 10 6.0 70 140 CB 2012T101□ RoHS 100 8 7.0 60 130 0.796 Ordering code EHS （Environmental Hazardous Substances） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Satura tion current Idc1 Temperature rise current Idc2 CB C2012 T1R0M RoHS 1.0 100 0.19 700 840 96C B C2012T2R2M RoHS 2.2 7 0 0.33 530 640 CB 012T4R7M RoHS 4.7 4 5 0.50 360 520 CB C 12T100□ RoHS 10 ±10 ±20% 40 1.2 240 340 52C B C2012T220□ RoHS 22 16 3 .7 170 190 CB C 12T470□ RoHS 47 11 5 .8 120 150 ・□Please specify the Inductance tolerance code （Ｋor Ｍ） ※）Th e sat uration current value（Idc1） is t he DC current value having inductance decrease down to 30%. （at 20℃） ※）The temperature rise current value（Idc2） is t he DC current value having temperature increase up to 40 ℃. （at 20℃） ※）The maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value. Ordering code EHS （Environmental Hazardous Substances） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Satura tion current Idc1 Temperature rise current Idc2 CB 2016T1R0M RoHS 1.0 ±20% 100 0.09 600 1100 7.96 CB 2016T1R5M RoHS 1.5 80 0.11 550 1000 CB 2016T2R2M RoHS 2.2 70 0.13 510 1000 CB 2016T3R3M RoHS 3.3 55 0.20 400 800 CB 2016T4R7M RoHS 4.7 45 0.25 340 740 CB 2016T6R8M RoHS 6.8 38 0.35 300 600 2.52 CB 2016T100□ RoHS 10 ±10% ±20% 32 0.50 250 520 CB 2016T150□ RoHS 15 28 0.70 210 440 CB 2016T220□ RoHS 22 16 1.0 165 370 CB 2016T330□ RoHS 33 14 1.7 130 270 CB 2016T470□ RoHS 47 11 2.4 110 240 CB 2016T680□ RoHS 68 10 3.0 90 210 CB 2016T101 □ RoHS 100 8 4.5 70 170 0.796 Ordering code EHS （Environmental Hazardous Substances） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Satura tion current Idc1 Temperature rise current Idc2 CB 2518T 1R0M RoHS 1.0 100 0.06 1200 1500 7.96 CB 2518T1R5M RoHS 1.5 8 0 0.07 650 1400 CB 2518T2R2M RoHS 2.2 6 8 0.09 510 1300 CB 2518T3R3M RoHS 3.3 5 4 0.11 440 1200 CB 2518T4R7MR RoHS 4.7 4 6 0.10 310 1200 CB 2518T4R7M RoHS 4.7 4 6 0.13 340 1100 CB 2518T6R8M RoHS 6.8 3 8 0.15 270 930 CB 2518T100□ RoHS 10 ±10 ±20% 30 0.25 250 820 2.52 CB 2518T150□ RoHS 15 23 0 .32 180 650 CB 2518T220□ RoHS 22 19 0 .50 165 580 CB 2518T330□ RoHS 33 15 0 .70 130 460 CB 2518T470□ RoHS 47 12 0 .95 110 420 CB 2518T680□ RoHS 68 9. 5 1.5 70 310 CB 2518T101□ RoHS 100 9 .0 2.1 60 260 0.796 CB 2518T151□ RoHS 150 7 .0 3.2 55 210 CB 2518T221□ RoHS 220 5 .5 4.5 50 180 CB 2518T331□ RoHS 330 4 .5 7.0 40 140 CB 2518T471□ RoHS 470 3 .5 10 35 120 CB 2518T681□ RoHS 680 3 .0 17 30 90 CB 2518T102□ RoHS 100 0 2.4 24 25 75 0.252

50 wound02_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• CBC2016 TYPE
• CBL2012 TYPE
• CBC251
• CBC322

5 TYPE

（Environmental Hazardous Substances） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Satura tion current Idc1 Temperature rise current Idc2 CB C2016T1R0M RoHS 1.0 ±20% 100 0.10 1100 1100 7.96 CB C2016T1R5M RoHS 1.5 80 0.15 1000 1000 CB C2016T2R2M RoHS 2.2 70 0.20 750 720 CB C2016T3R3M RoHS 3.3 55 0.27 600 610 CB C2016T4R7M RoHS 4.7 45 0.37 550 530 CB C2016T6R8M RoHS 6.8 38 0.59 450 450 2.52 CB C2016T100□ RoHS 10 ±10% ±20% 32 0.82 380 350 CB C2016T150□ RoHS 15 28 1.2 300 300 CB C2016T220□ RoHS 22 16 1.8 250 240 CB C2016T330□ RoHS 33 14 2.8 220 220 CB C2016T470□ RoHS 47 11 4.3 150 150 CB C2016T680□ RoHS 68 10 7.0 130 130 CB C2016T101 □ RoHS 100 8 8.0 110 110 0.796 Ordering code EHS （Environmental Hazardous Substances） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Satura tion current Idc1 Temperature rise current Idc2 CB L2012T1R0M RoHS 1.0 ±20% 100 0.15 620 950 0.1 CB L2012T2R2M RoHS 2.2 80 0.39 440 590 CB L2012T4R7M RoHS 4.7 45 0.66 275 490 CB L2012T100M RoHS 10 32 1.0 205 370 CB L2012T220M RoHS 22 23 2.1 150 250 CB L2012T470M RoHS 47 11 4.2 100 140 ・□Please specify the Inductance tolerance code （Ｋor Ｍ） ※）The saturation current value（Idc1） is t he DC current value having inductance decrease down to 30%. （at 20℃） ※）The temperature rise current value（Idc2） is t he DC current value having temperature increase up to 40 ℃. （at 20℃） ※）The maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value. Ordering code EHS （Environmental Hazardous Substances） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Satura tion current Idc1 Temperature rise current Idc2 CB C2518T1R0M RoHS 1.0 ±20% 100 0.08 1000 1200 7.96 CB C2518T1R5M RoHS 1.5 80 0.11 950 1190 CB C2518T2R2M RoHS 2.2 68 0.13 890 1100 CB C2518T3R3M RoHS 3.3 54 0.16 730 1020 CB C2518T4R7M RoHS 4.7 41 0.20 680 920 CB C2518T6R8M RoHS 6.8 38 0.30 550 740 2.52 CB C2518T100□ RoHS 10 ±10% ±20% 30 0.36 480 680 CB C2518T150□ RoHS 15 23 0.65 350 500 CB C2518T220□ RoHS 22 19 0.77 320 460 CB C2518T330□ RoHS 33 15 1.5 270 320 CB C2518T470□ RoHS 47 12 1.9 240 290 CB C2518T680□ RoHS 68 9.5 2.8 200 200 CB C2518T101 □ RoHS 100 9.0 3.7 160 170 0.796 CB C2518T151□ RoHS 150 7.0 6.1 140 130 CB C2518T221□ RoHS 220 5.5 8.4 115 110 CB C2518T331□ RoHS 330 4.5 12.3 100 90 CB C2518T471□ RoHS 470 3.5 22 80 70 CB C2518T681□ RoHS 680 3.0 28 65 60 Ordering code EHS （Environmental Hazardous Substances） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Satura tion current Idc1 Temperature rise current Idc2 CB C3225T1R0MR RoHS 1.0 ±20% 250 0.055 2000 1440 0.1 CB C3225T1R5MR RoHS 1.5 220 0.06 2000 1310 CB C3225T2R2MR RoHS 2.2 190 0.08 2000 1130 CB C3225T3R3MR RoHS 3.3 160 0.095 2000 1040 CB C3225T4R7MR RoHS 4.7 70 0.10 1250 1010 CB C3225T6R8MR RoHS 6.8 50 0.12 950 940 CB C3225T100□R RoHS 10 ±10% ±20% 23 0.133 900 900 CB C3225T150□R RoHS 15 20 0.195 730 850 CB C3225T220□R RoHS 22 17 0.27 620 780 CB C3225T330□ R RoHS 33 13 0.41 500 570 CB C3225T470□R RoHS 47 10 0.67 390 480 CB C3225T680□R RoHS 68 8 1.0 320 410 CB C3225T101□R RoHS 100 6 1.4 270 340

51wound02_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• CBMF1608 TYPE Ordering code EHS （Environmental Hazardous Substances） Inductance 〔μH〕 Inductance Tolerance Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 Measuring frequency 〔MHz〕 Satura tion current Idc1 Temperature rise current Idc2 CBMF1608T1R0M RoHS 1.0 ±20% 100 0.09 290 770 7.96CBMF1608T2R2M RoHS 2.2 80 0.17 190 560 CBMF1608T3R3M RoHS 3.3 60 0.22 170 500 CBMF1608T4R7M RoHS 4.7 45 0.24 145 470 CBMF1608T100□ RoHS 10.0 ±10% ±20% 32 0.36 115 380 2.52CBMF1608T220□ RoHS 22 16 1.0 70 230 CBMF1608T470□ RoHS 47 11 2.5 50 140 ・□Please specify the Inductance tolerance code （Ｋor Ｍ） ※）Th e sat uration current value（Idc1） is t he DC current value having inductance decrease down to 30%. （at 20℃） ※）The temperature rise current value（Idc2） is t he DC current value having temperature increase up to 40 ℃. （at 20℃） ※）The maximum rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.

52 wound02_e-01 ■ ELECTRICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Impedance ʤЊʥ Frequency ʤMHzʥ CB2518 1 1 0 100000 100 1000 10000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CB2012 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CB2016 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CB2518 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CBC2016 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ CBC2016 1 1 0 100000 100 1000 10000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CBC2012 1 1 0 0.1 100 100 1000 1R0M 470˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ CBC2012 1 1 0 100000 100 1000 10000 100 100001000 1R0M 470˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CBC2518 1 1 0 0.1 1000 100 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ CBC2518 1 1 0 100000 100 1000 10000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CBC3225 1 1 0 0.1 100 100 100001000 1R0MR 101˘R 100˘R Impedance ʤЊʥ Frequency ʤMHzʥ CBC3225 1 1 0 100000 100 1000 10000 100 100001000 1R0MR 101˘R 100˘R Low Rdc Type Low Rdc Type High Current Type High Current Type ■DC Bias characteristics Measured by HP4285A＋42841A ■Impedance-vs-Frequency characteristics Measured by HP4291A Impedance ʤЊʥ Frequency ʤMHzʥ CB2012 1 1 0 100000 10000 1000 100 100 100001000 1R0M 101˘ 100˘ Impedance ʤЊʥ Frequency ʤMHzʥ CB2016 1 1 0 100000 100 1000 10000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ CBL2012 1 1 0 100 100 1000 470M 100M 4R7M Impedance ʤЊʥ Frequency ʤMHzʥ CBL2012 1 1 0 100000 100 1000 10000 100 1000 4R7M 470M 100M Inductance ʤЖHʥ DC Bias ʤmAʥ CBMF1608 1 1 0 100 100 1000 100˘ 4R7M 1R0M Impedance ʤЊʥ Frequency ʤMHzʥ CBMF1608 1 1 0 100000 100 1000 10000 100 1000 10000 4R7M 470˘ 100˘ Low Profile Type Low Profile Type Bottom-surface electrode Type Bottom-surface electrode Type

54 wound03_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS/STANDARD QUANTITY ■ AVAILABLE CAPACITANCE RANGE ■ APPLICATIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Recommended Land Patterns Surface Mounting ・Mounting and sold ering conditions should be checked beforehand. ・Applicable solder ing process to those products is reflow soldering only. （LB only） ・Recommended Land Pat terns ◦ LBM2016 Series High Q and narrow tolerance are achieved by adopting bottom-sur - face e l ectrode structure.Wound Chip Inductors that are suitable for module d esign of signal line uses. ◦ LEM252

0 Series

-quality inductor that is simple to mass-produce and conforms to the s ame production process and basic construction as an axial lead typ e inductor. ◦ DSC/DVC /HDD, LCD, portable telephones, game equipment. Vari o us audio-visual equipment, various communication equipment, etc. WOUND CHIP INDUCTORS FOR SIGNAL LINE (LB/LE SERIES M TYPE) L B M 2 0 1 6 T 1 0 0 J △ ❶ ❷ ❸ ❹ ❺ ❻ Type L W T e W Standard Quantity [pcs] Paper Tape Embossed Tape LBM2016 2.0±0.2 （0.08±0.008） 1.6±0.2 （0.063±0.008） 1.6±0.2 （0.063±0.008） 0.5±0.2 LEM2520 2.5±0.2 （0.098±0.008） 2.0±0.2 （0.079±0.008） 1.8±0.2 （0.071±0.008） 0.45 （0.018） 1.4±0.1 （0.055±0.004） Unit：mm（inch） ❶Type LBM Wound chip inductor for signal l ine LEM Wound ch ip inductor for signal l ine ❹Nominal Inductance〔μH〕 exampl e R12 0.12 1R0 1.00 100 10.0 ※R=decimal point ❷External Dimensions 〔mm〕 2016 2 .0×1.6 2520 2.5×2.0 ❺Inductance Tolerances J ±5% K ±10% ❸Packaging T Tape & Reel Unit：mm TYPE A B C LBM2016 0.7 0.8 1.8 LEM2520 0.9 1.5 1.5A A C B Range Type LBM2016 LEM2520 Ordinary type Inductance ［μH］ 0.12 610 0.1 3 520 0.37 1.0 385 0.38 245 1.10 10 215 1.20 155 3.50 100 80 8.00 60 21.00 100μH 100μH ❻Internal code △ Standard Produc ts △＝Blank space LBM2016 LEM2520 e e REFLOWWAVEREFLOW LE：LB：

55wound03_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• LBM2016 TYPE
• LEM2520 TYPE Ordering code EHS（Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Q （min.） Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 （max.） Measuring frequency 〔MHz〕 LB M2016TR12J RoHS 0.12 ±5％ 600 0.13 610 25.2 LB M2016TR15J RoHS 0.15 550 0.15 570 LB M2016TR18J RoHS 0.18 500 0.15 560 LB M2016TR22J RoHS 0.22 450 0.20 520 LB M2016TR27J RoHS 0.27 425 0.21 510 LB M2016TR33J RoHS 0.33 400 0.21 490 LB M2016TR39J RoHS 0.39 375 0.26 440 LB M2016TR47J RoHS 0.47 350 0.26 430 LB M2016TR56J RoHS 0.56 300 0.29 410 LB M2016TR68J RoHS 0.68 270 0.32 400 LB M2016TR82J RoHS 0.82 250 0.34 390 LB M2016T1R0J RoHS 1.0 220 0.38 385 7.96 LB M2016T1R2J RoHS 1.2 180 0.41 370 LB M2016T1R5J RoHS 1.5 135 0.47 350 LB M2016T1R8J RoHS 1.8 100 0.48 345 LB M2016T2R2J RoHS 2.2 75 0.54 340 LB M2016T2R7J RoHS 2.7 55 0.59 310 LB M2016T3R3J RoHS 3.3 48 0.68 290 LB M2016T3R9J RoHS 3.9 43 0.74 275 LB M2016T4R7J RoHS 4.7 40 0.78 270 LB M2016T5R6J RoHS 5.6 36 0.88 255 LB M2016T6R8J RoHS 6.8 33 0.97 240 LB M2016T8R2J RoHS 8.2 30 1.10 225 LB M2016T100J RoHS 10 27 1.20 215 2.52 LB M2016T120J RoHS 12 23 1.4 200 LB M2016T150J RoHS 15 20 1.5 190 LB M2016T180J RoHS 18 18 2.5 150 LB M2016T220J RoHS 22 17 2.8 140 LB M2016T270J RoHS 27 16 3.2 130 LB M2016T330J RoHS 33 15 3.6 125 LB M2016T390J RoHS 39 14 3.9 120 LB M2016T470J RoHS 47 13 4.1 115 LB M2016T560J RoHS 56 12 5.9 95 LB M2016T680J RoHS 68 11 7.0 90 LB M2016T820J RoHS 82 10 7.7 85 LB M2016T101J RoHS 100 15 9.0 8.0 80 0.796 Ordering code EHS（Environmental Hazardous Substances ） Inductance 〔μH〕 Inductance Tolerance Q （min.） Self-resonant frequency 〔MHz〕 min. Resistance DC Rated curr ent 〔mA〕 （max.） Measuring frequency 〔MHz〕 LEM 2520 TR12K RoHS 0.12 ±10％ 600 0.37 520 25.2 LEM 2520 TR15K RoHS 0.15 550 0.42 480 LEM 2520 TR18K RoHS 0.18 500 0.46 460 LEM 2520 TR22K RoHS 0.22 450 0.52 430 LEM 2520 TR27K RoHS 0.27 425 0.56 420 LEM 2520 TR33K RoHS 0.33 400 0.60 400 LEM 2520 TR39K RoHS 0.39 375 0.65 375 LEM 2520 TR47K RoHS 0.47 350 0.68 350 LEM 2520 TR56K RoHS 0.56 300 0.75 325 LEM 2520 TR68K RoHS 0.68 270 0.85 300 LEM 2520 TR82K RoHS 0.82 250 1.00 260 LEM 2520 T1R0J RoHS 1.0 ±5％ 220 1.10 245 7.96 LEM 2520 T1R2J RoHS 1.2 180 1.20 230 LEM 2520 T1R5J RoHS 1.5 135 1.30 220 LEM 2520 T1R8J RoHS 1.8 100 1.45 210 LEM 2520 T2R2J RoHS 2.2 75 1.55 200 LEM 2520 T2R7J RoHS 2.7 55 1.70 195 LEM 2520 T3R3J RoHS 3.3 48 1.90 185 LEM 2520 T3R9J RoHS 3.9 43 2.10 180 LEM 2520 T4R7J RoHS 4.7 40 2.30 175 LEM 2520 T5R6J RoHS 5.6 36 2.50 170 LEM 2520 T6R8J RoHS 6.8 33 2.70 165 LEM 2520 T8R2J RoHS 8.2 30 3.05 160 LEM 2520 T100J RoHS 10 27 3.50 155 2.52 LEM 2520 T120J RoHS 12 23 3.80 150 LEM 2520 T150J RoHS 15 20 4.40 140 LEM 2520 T180J RoHS 18 18 4.80 130 LEM 2520 T220J RoHS 22 17 5.50 125 LEM 2520 T270J RoHS 27 16 6.30 115 LEM 2520 T330J RoHS 33 15 7.10 110 LEM 2520 T390J RoHS 39 14 9.50 90 LEM 2520 T470J RoHS 47 13 11.10 80 LEM 2520 T560J RoHS 56 12 12.10 75 LEM 2520 T680J RoHS 68 11 16.60 70 LEM 2520 T820J RoHS 82 10 19.00 65 LEM 2520 T101J RoHS 100 15 9 21.00 60 0.796

56 wound03_e-01 ■ ELECTRICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Frequency[MHz] 100Q 10 100 101J 100J 1R0J 1 1 0 Freaquency[MHz] 100 100 1000 10000 100000 1000000 101J 100J 1R0J 1 1 0 Freaquency[MHz] Inductance[ЖH] 100 100 1000 101J 100J 1R0J Measured by HP4285A＋42851A Measured by HP4285A＋42841A Measured by HP4285A＋42851A ■Q-vs-Frequency characteristics ■Q-vs-Frequency characteristics ■DC Bias characteristics ■Impedance-vs-Frequency characteristics ■Inductance-vs-Frequency characteristics ■Temperature characteristics

• LBM2016
• LEM2520

wound0103_reli-PRP1wound0103_reli_e-01 ■ PACKAGING ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ②Tape material ③Taping Dimensions ◦Embossed Tape （0.315 inches wide） ◦Card board carrier tape （ 0.315 inches wide） Type Chip cavity Insertion pitch Tape thickness A B F T K LBM 2016 1.75±0.1 （0.069±0.004） 2.1±0.1 （0.083±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 1.9max. （0.074） LEM 2520 2.3±0.1 （0.091±0.004） 2.7±0.1 （0.106±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.1±0.1 （0.083±0.004） LBC3225/ CBC3225 2.8±0.1 （0.110±0.004） 3.5±0.1 （0.138±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 4.0max. （0.157） LB3218 2.1±0.1 （0.084±0.004） 3.5±0.1 （0.014±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.2max. （0.086） LB2518 / CB2518 LBC2518 / CBC2518 LBR251 2.15±0.1 （0.085±0.004） 2.7±0.1 （0.107±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.2max. （0.086） LB2016/ CB2016 LBC2016 / CBC2016 1.75±0.1 （0.069±0.004） 2.1±0.1 （0.083±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 1.9max. （0.074） LB2012 / CB2012 LBC2012 / CBC2012 LBR2012 1.45±0.1 （0.058±0.004） 2.25±0.1 （0.09±0.004） 4.0±0.1 （0.157±0.004） 0.25±0.05 （0.010±0.002） 1.45max. （0.057） CBL2012 1.55±0.1 （0.061±0.004） 2.3±0.1 （0.091±0.004） 4.0±0.1 （0.157±0.004） 1.1max. （0.044） 1.1max. （0.044） LB1608 1.0±0.1 （0.059±0.004） 1.8±0.1 （0.072±0.004） 4.0±0.1 （0.157±0.004） 1.1max. （0.044） 1.1max. （0.044） LBMF1608 / CBMF1608 1.1±0.1 （0.04±0.004） 1.9±0.1 （0.076±0.004） 4.0±0.1 （0.157±0.004） 0.25±0.05 （0.010±0.002） 1.2max. （0.047） Unit：mm（inch） ①Minimum Quantity Type Standard Quantity ［pcs］ Papar Tape Emboss ed Tape LBC322 5/CBC3225 ー 1000 LB3218 ー 2000 LBR2518/LBC2518/LB251 /CB2518/CBC2518/LEM2520 ー 2000 LBM2016/LBC2016/ LB2016/CB2016/CBC2016 ー 2000 LB2012/LBC2012/LBR202 /CB2012/CBC2012 ー 3000 CBL2012 4000 ー LB1608 4000 ー LBMF1608/CBMF1608 ー 3000◦Embossed tape ④Leader and Blank Portion ⑤Reel Size The top tape requires a peel-off force 0.1 to 0.7N in the direction of the arrow as illustrated below. ⑥Top Tape Strength Pull direction 10.0ʶ1.5 (0.394ʶ0.059) П180 ʢП7.09 ) ʵ0.118 П60 ʢП2.36 )ʴ1 ʴ0.039 2.5 max ʢ0.098ʣ

wound0103_reli-PRP2 wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1.Operating temperature Range LEM2520 ー40～＋85℃ LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 ー25～＋105 ℃ （Including self-generated heat） LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 2.Storage LEM2520 ー40～＋85℃ LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 3.Rated Current LEM2520 Within the specified tolerance LB3218 L B2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 LEM Series The maximum DC value having inductance decr ease within 10％ and temperature incr ease within 20℃ by the application of DC bias. 4.Inductance LEM2520 Within the specified tolerance LB3218 L B2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 LEM Series R12～101 Measuring equipment：LCR Meter（HP4285A＋42851A or its equivalent） Measuring frequency：Specified frequency LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF・LBM Series Measuring equipment：LCR Mater（HP4285A or its equivalent） 5.Q LEM2520 Within the specified tolerance LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 Within the specified tolerance 【Test Methods and Remarks】 LEM Series R12～101 Measuring equipment：LCR Meter （HP4285A＋42851A or its equivalent） Measuring frequency：Specified frequency LBM Series Measuring equipment：LCR Mater（ HP4285A or its equivalent） 6.DC Resisitance LEM2520 Within the specified tolerance LB3218 L B2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF Series Measuring equipment：DC Ohmmeter（HIOKI 3227 or its equivalent）

wound0103_reli-PRP3wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 7.Self-Resonant Frequency LEM2520 Within the specified tolerance LB3218 L B2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 LEM2520 Measuring equipment：Impedance analyzer（HP4291A or its equivalent） LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF Series Measuring equipment ：Impedance analyzer （HP4291A or its equivalent LBM Series Measuring equipment：Network analyzer（HP8720B or its equivalent） 8.Temperature Characteristic LEM2520 Inductance change:Within±5％ LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 Inductance change:Within± 15％ LBMF1608・LB3218 Inductance change:Within±20％ LBC3225 LBC2518 LBC2016 LBC2012 LBC3225・LBC2518・LBC2016 Inductance change:Within±20％ LBC2012 Inductance change:Within± 30％ LBR2518 LBR2012 Inductance change:Within± 15％ CB2518 CB2016 CB2012 Inductance change:Within ±15％ CBC3225 CBC2518 CBC2016 CBC2012 CBC3225・CBC2518・CBC2016 Inductance change:Within±20％ CBC2012 Inductance change:Within± 30％ CBL2012 Inductance change:Within±15 CBMF1608 Inductance change:Within±20％ LBM2016 Inductance change:Within±5％ 【Test Methods and Remarks】 Change of maximum inductance deviation in step 1-5 Step 1 2 3 4 5 Temperture（℃） 20 ー25 20 （Reference temperature ） ＋85 （Maximum operating temperature ） 20 9.Rasistance to Flexure of Substrate LEM2520 No damage. LB3218 L B2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 Warp： 2mm（ LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF Series） Pressing jig Board LBɾLBMFɾ CBMF1608 ɹ ɿ 0.8mm Others ɿ 1.0mm 3mm （LEM2520） Test substrate: Printed board According to JIS C0051 10.Body Strength LEM2520 No damage. LB3218 L B2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 LB・LBC・LBR・CB・CBC・CBL・LBM・LEM2520 Applied force：10N Duration：10sec. LB1608・LBMF1608・CBMF1608 Applied force：5N Duration：10sec. 11.Self Resonant Freguency LEM2520 Inductance change : Within－10％LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 Inductance change : Within－20％ CB2518 CB2016 CB2012 Inductance change : Within－30％CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 Inductance change : Within－10％ 【Test Methods and Remarks】 Measure inductance with application of rated current using LCR metre to compare it with the initial value.

wound0103_reli-PRP4 wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 12.Adhesion of terminal electrode LEM2520 No abnormality. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF・LEM2520 Applied force：10N to X and Y directions Duration：5 sec. Test substrate：Printed boar d LB1608・CBMF1608・LBMF1608 Applied force：5N to X and Y directions Duration：5 sec. Test substrate：Printed board 13.Resistance to vibration LEM2520 Inductance change:Within±5％ No significant abnormality in appearance. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 Inductance change:Within±10％ No significant abnormality in appearance. LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 Inductance change:Within±5％ N o significant abnormality in appearance. 【Test Methods and Remarks】 LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：According to JIS C5102 clause 8.2. Vibration type：A Dir ections：2 hrs each in X, Y and Z directions. Total：6 hrs Frequency range：10 to 55 to 10 Hz （1min.） Amplitude：1.5mm Mounting method：Soldering onto printed board Recovery：At least 2 hrs of r ecovery under the standard condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 14.Drop test LEM2520 Inductance change:Within±5％ No significant abnormality in appearance. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 LEM： Acceleration：980m/sec2 Duration：6msec Number of times：6 sides × 3 times Mounting method：Soldering onto printed board Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measur ement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 15.Solderability LEM2520 At least 90％ of surface of terminal electrode is covered by new LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 LEM： Solder temperature：230±5℃ Duration：5±0.5sec. Flux：Methanol solution with 25％ of colophony LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： Solder temperature：245±5℃ Duration：5±0.5sec Flux：Methanol solution with 25％ of colophony

wound0103_reli-PRP5wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 16.Resisitance to soldering heat LEM2520 No significant abnormality in appearance. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LB3218，LB2518，LB2016，LB2012，LB1608 Inductance change:Within±10％ No significant abnormality in appearance. LBMF1608 Inductance change:Within±20％ No significant abnormality in appearance. LBC3225 LBC2518 LBC2016 LBC2012 Inductance change:Within±10％ No significant abnormality in appearance. LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 Inductance change:Within±20％ No significant abnormality in appearance. LBM2016 Inductance change:Within±5％ No significant abnormality in appearance. 【Test Methods and Remarks】 LEM： Reflow condition 3 times of reflow over at 220±5℃ for 40sec. MAX, With Peak temperature at 240±5℃ for 5 sec. MAX. （Refer to a Profile of chart below Flow condition Solder temperature：260±5℃ Duration：10±1sec. Once 3 times of r eflow oven at 230℃ MIN for 40sec. with peak temperature at 260 ℃ for 5sec. 17.Resisitance to solvent LEM2520 No significant abnormality in appearance LB3218 L B2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 Solvent temperature：Room temperature Type of solvent：Isopr opyl alcohol Cleaning conditions：90s. Immersion and cleaning. 18.Thermal shock LEM2520 Inductance change :Within±10％ Q→ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 Inductance change:Within±10％ No significant abnormality in appearance. LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 LEM : Conditions for 1cycle Step Temperature （℃） Duration（min） 1 ー40 30 2 ＋85 30 Number of cycle ：100 cycle Recovery ：At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： ー40～＋85℃, maintain times 30min. ,100 cycle Recovery：At least 2 hrs of r ecovery under the standard condition after the test, followed by the measurement within 48 hrs. 19.Damp heat LEM2520 Inductance change :Within±10％ Q→ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 Inductance change:Within±10％ No significant abnormality in appearance. LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 Temperature：60±2 Humidity：90～95％RH Duration：1000 hrs Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

wound0103_reli-PRP6 wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 20.Loading under damp heat LEM2520 Inductance change :Within±10％ Q→ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 Inductance change:Within±10％ No significant abnormality in appearance. LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 Humidity：90～95％RH Duration：1000 hrs Applied current：Rated current Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 21.High temperature life test LEM2520 Inductance change :Within±10％ Q→ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 Inductance change:Within±10％ No significant abnormality in appearance. CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 Duration：1000 hrs Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standar d condition after the test, followed by the measurement within 2 hrs. 22.Loading at high temperature LEM2520 LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 Inductance change:Within±10％ No significant abnormality in appearance.LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 Duration：1000 hrs Applied current：Rated current Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measur ement within 48 hrs.

wound0103_reli-PRP7wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 23.Low temperature life test LEM2520 Inductance change :Within±10％ Q→ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 Inductance change:Within±10％ No significant abnormality in appearance. LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016 【Test Methods and Remarks】 Temperature：－40±2℃ Duration：1000 hrs Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs. 24.Standard condition LEM2520 Standard test conditions Unless specified, Ambient temperature is 20±15℃ and the Relative humidity is 65± 20％. If there is any doubt about the test results, further measurement shall be had within the following limits: Ambient Temperatur e: 20±2℃ Relative humidity: 65±5％ Inductance value is based on our standard measurement systems. LB3218 LB2518 LB2016 LB2012 LB1608 LBMF1608 LBC3225 LBC2518 LBC2016 LBC2012 LBR2518 LBR2012 CB2518 CB2016 CB2012 CBC3225 CBC2518 CBC2016 CBC2012 CBL2012 CBMF1608 LBM2016

wound0103_reli-PRP8 wound0103_reli_e-01 ■ PRECAUTIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1．Circuit Design Precautions ◆Operating environment 1． The pr oducts described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, measur ing equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2．PCB Design Precautions ◆Land pattern design 1．Please contact any of our offices for a land pattern, and refer to a recommended land pattern of a right figure or specifications. Technical consider- ations PRECAUTIONS 【Recommended Land Patterns】 Surface Mounting ・ Mounting and soldering conditions should be checked beforehand. ・ Applicable soldering process to those products is r eflow soldering only. ・ Recommended Land Patterns A A C B Unit : mm TYPE A B C 1608 0.55 0.7 1.0 MF1608 0.55 0.8 0.9 2012 0.7 0.8 1.45 2016 0.7 0.8 1.8 2518 0.8 1.2 2.0 LEM2520 0.9 1.5 1.5 3218 1.0 1.6 2.0 3225 1.0 1.6 2.7 3．Considerations for automatic placement Precautions ◆Adjustment of mounting machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked beforehand. Technical consider- ations 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. 4．Soldering Precautions ◆Wave soldering （LEM Type only） 1．For wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant specifications. ◆Reflow soldering （ LB and CB Types） 1．For reflow soldering with either leaded or lead-free solder,the pr ofile specified in "point for controlling" is recommended. ◆Reflow soldering （LEM） 1．For reflow soldering, please apply conditions meeting the range of the specified conditions in our catalog or the relevant specifications. ◆Recommended conditions for using a soldering iron 1．Put the soldering ir on on the land-pattern. Soldering iron's temperature-Below 350℃ Duration-3 secons or less. The soldering iron shoud not come in contact with inductor directly. Technical consider- ations ◆Wave soldering （LEM Type only） 1．Components can be damaged by excessive heat where soldering conditions exceed the specified range. ◆Reflow soldering （ LB and CB Types） 1．Reflow profile 300 250 200 150 100 Pre-heat zone 90ʶ30 sec 30ʶ10 sec 230ˆ Minn ʢLBɾCB Typeʣ Peak Temp: 260ʴ0/ʔ5ˆ 5 sec Max 180ˆ 150ˆ ◆Recommended conditions for using a soldering iron 1．Components can be damaged by excessive heat where soldering conditions exceed the specified range. 5．Cleaning Precautions ◆Cleaning conditions 1．LEM Type, LB Type, CB Type Washing by supersonic waves shall be avoided. Technical consider- ations ◆Cleaning conditions 1．LEM Type, LB Type, CB Type If washing by supersonic waves, supersonic waves may cause broken pr oducts. 6．Handling Precautions ◆Handling 1．Keep the inductors away from all magnets and magnetic objects. ◆Breakaway PC boards （splitting along perforations） 1．When splitting the PC boar d after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the boar 2．Board separation should not be done manually, but by using the appropriate devices. ◆Mechanical considerations 1．Please do not give the inductors any excessive mechanical shocks. Technical consider- ations ◆Handling 1．There is a case that a characteristic varies with magnetic influence. ◆Breakaway PC boards （splitting along perforations） 1．Planning patter n configurations and the position of products should be carefully performed to minimize str ess. ◆Mechanical considerations 1．There is a case to be damaged by a mechanical shock. 7．Storage conditions Precautions ◆Storage 1．To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. ・Recommended conditions Ambient temperature：0～40℃ ／ Humidity：Below 70% RH The ambient temperatur e must be kept below 30℃ Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, LE type inductors should be used within one year from the time of delivery. LB type：Should be used within 6 months from the time of delivery. LE type：In case of storage over 6 months, solderability shall be checked before actual usage. Technical consider- ations ◆Storage 1．Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. LEM Type，LB Type，CB Type

122 wound04_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS /STANDARD QUANTITY ■ APPLICATIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦ Small and Low profile inductor. ◦ It corresponds to High current. ◦ Simple and original magnetic shield structure. ◦ Durable structure against dropping impact. ◦ For small DC/DC converter (cellular Phone, HDD, DVC, DSC, PDA, LCD display etc). SMD INDUCTORS LOW PROFILE TYPE ❶Type NR△, NRG Coating resin specification △＝Blank Space ❸Packaging T△ Tape & Reel △＝Blank Space ❹Nominal inductance 〔μH〕 example 2R2 2.2 100 10 101 100 ※R＝decimal point ❺Inductance tolerance M ±20% N ±30% ❻Internal code △ Standard product △＝Blank Space ❷External dimensions (W ×L×H) example 4026 4.0×4.0×2.6mm N R △ 4 0 1 8 T △ 1 0 0 M △ ❶ ❷ ❸ ❹ ❺ ❻ L W e e f H f϶e ὙL W H ee REFLOW Type L W H e f Standard Quantity [pcs ] Tape & Reel NR3010 3.0±0.1 （0.118±0.004） 3.0±0.1 （0.118±0.004） 1.0 max 0.9±0.2 （0.035±0.008） 1.9±0.2 （0.075±0.008） 2000（0.039 max ） NR3012 1.2 max 2000（0.047 max ） NR3015 1.5 max 2000（0.059 max ） NR4010 4.0±0.2 4.0±0.2 1.0 max 1.1±0.2 2.5±0.2 5000（0.039 max ） NR4012 1.2 max 4500（0.047 max ） NR4018 （0.157± 0.008） （0.157± 0.008） 3500（0.071 max ） NRG4026 2.6 max 2000（0.102 max） 4.2max （0.165max） （0.157max） *1） 0R9 ～6R8 Type *2） 100～101 Type Unit : mm (inch) Type L W H e Δe f Δℓ Standard Quantity [pcs ] Tape & Reel NR5040 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） ＊3） 4.1max （ 0.161max） ＊4） 4.0max （ 0.157max） 1.2±0.2 （0.047±0.008） 0.3±0.2 （0.011±0.008） 3.3±0.2 （0.130±0.008） 1.3±0.3 （0.051±0.011） 1500 NR6012 （E Type） 2.3±0.3 （0.091±0.011） *3） 1R5～100 Type *4） 150 ～470 Type Unit : mm (inch)

123wound04_e-01 ■ AVAILABLE INDUCTANCE RANGE ■ PART NUMBERS

• NR 3010 Shielded type
• NR 3012 Sh ielded type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 3010T 1R0N RoHS 1.0 ±30％ 126 0.0 65 1,300 1, 400 100 NR 3010T 1R5N RoHS 1.5 98 0.080 1 ,200 1, 300 NR 3010T 2R2M RoHS 2.2 ±20％ 82 0.095 1,100 1, 100 NR 3010T 3R3M RoHS 3.3 63 0.140 870 940 NR 3010T 4R7M RoHS 4.7 56 0.190 750 780 NR 3010T 6R8M RoHS 6.8 46 0.300 610 630 NR 3010T 100M RoHS 10 35 0.450 500 510 NR 3010T 150M RoHS 15 30 0.740 400 400 NR 3010T 220M RoHS 22 25 1.03 350 350 NR 3010T 330M RoHS 33 20 1.55 260 275 NR 3010T 470M RoHS 47 17 2.05 220 235 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 3012T 1R0N RoHS 1.0 ±30％ 110 0.0 50 1,500 1, 490 100 NR 3012T 1R5N RoHS 1.5 92 0.060 1 ,360 1, 400 NR 3012T 2R2M RoHS 2.2 ±20％ 70 0.080 1,100 1, 200 NR 3012T 3R3M RoHS 3.3 55 0.100 910 1,05 0 NR 3012T 4R7M RoHS 4.7 48 0.130 770 980 NR 3012T 6R8M RoHS 6.8 40 0.190 670 740 NR 3012T 100M RoHS 10 32 0.290 540 630 NR 3012T 150M RoHS 15 27 0.450 440 485 NR 3012T 220M RoHS 22 22 0.630 375 420 NR 3012T 330M RoHS 33 19 1.03 310 330 NR 3012T 470M RoHS 47 17 1.45 250 280 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
• NR 3015 Shielded type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 3015T 1R0N RoHS 1.0 ±30％ 100 0.0 30 2,100 2, 100 100 NR 3015T 1R5N RoHS 1.5 87 0.040 1 ,800 1, 820 NR 3015T 2R2M RoHS 2.2 ±20％ 64 0.060 1,480 1, 500 NR 3015T 3R3M RoHS 3.3 49 0.080 1,210 1, 230 NR 3015T 4R7M RoHS 4.7 40 0.120 1,020 1, 040 NR 3015T 6R8M RoHS 6.8 36 0.160 870 880 NR 3015T 100M RoHS 10 28 0.230 700 710 NR 3015T 150M RoHS 15 23 0.360 560 560 NR 3015T 220M RoHS 22 20 0.520 470 470 NR 3015T 330M RoHS 33 18 0.840 390 370 NR 3015T 470M RoHS 47 17 1.34 320 300 ※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20 ℃) ※）The temperature rise current value（Idc2) i s the DC current value having temperature increase up to 40 ℃. (at 20℃) ※）The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. Recomm ended Land Pa t terns Unit : mm 0.8 2.7 2.2 0.8 ʲNR3010, NR3012, NR3015ʳ 2.8 1.2 3.7 1.2 ʲNR4010, NR4012, NR4018, NRG4026ʳ 1.6 1.6 5.7 ʲNR6012,NR6020,NR6028,NR6045ʳ 4.7 1.5 1.5 4.0 ʲNR5040ʳ 3.6 1.8 7.5 1.8 ʲNR8040ʳ 5.6 Range Type NR 3010 NR 3012 NR 3015 NR 4 010 NR 4 012 NR 4 018 NR 5 040 NR 6 012 NR 6 020 NR 6 028 NR 6 045 NR 8040 N RG 4026 IMAX [mA] Rdc±20％ ［Ω］ IMAX [mA] Rdc±20％ ［Ω］ IMAX [mA] Rdc±20％ ［Ω］ IMAX [mA] Rdc±20％ ［Ω］ IMAX [mA] Rdc±20％ ［Ω］ IMAX [mA] Rdc±20％ ［Ω］ IMAX [mA] Rdc±30％ ［Ω］ IMAX [mA] Rdc±20％ ［Ω］ IMAX [mA] Rdc±20％ ［Ω］ IMAX [mA] Rdc±30％ ［Ω］ IMAX [mA] Rdc±30％ ［Ω］ IMAX [mA] Rdc±30％ ［Ω］ IMAX [mA] Rdc±30％ ［Ω］ 3800 0.020 4600 0.013 4200 0.014 7800 0.006 3.3 3600 0.020 1730 0.095 1400 0.125 1900 0.065 2500 0.047 3100 0.034 2300 0.030 10 2100 0.056 1000 0.235 1300 0.085 650 0.300 100 220 170 4.00 320 2.18 620 0.600 700 0.500 1000 0.290 Inductance ［μH］

124 wound04_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• NR 4018 Shielded type
• NR 6012 Shielded type
• NR 4012 Sh ielded type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 4012T 1R0N RoHS 1.0 ±30％ 131 0.0 60 2,500 1, 500 100 NR 4012T 2R2M RoHS 2.2 ±20％ 66 0.09 0 1,650 1, 200 NR 4012T 3R3M RoHS 3.3 50 0.130 1,200 98 0 NR 4012T 4R7M RoHS 4.7 45 0.140 1,050 96 0 NR 4012T 6R8M RoHS 6.8 35 0.180 900 840 NR 4012T 100M RoHS 10 28 0.240 740 770 NR 4012T 150M RoHS 15 23 0.400 560 600 NR 4012T 220M RoHS 22 18 0.480 510 540 NR 4012T 330M RoHS 33 15 0.810 400 420 NR 4012T 470M RoHS 47 12 1.00 350 370 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 4018T 1R0N RoHS 1.0 ±30％ 80 0.03 0 4,000 1, 830 100 NR 4018T 2R2M RoHS 2.2 ±20％ 52 0.06 0 2,700 1, 440 NR 4018T 3R3M RoHS 3.3 4 4 0.070 2,000 1, 230 NR 4018T 4R7M RoHS 4.7 3 4 0.090 1,700 1, 200 NR 4018T 6R8M RoHS 6.8 2 9 0.110 1,450 1, 060 NR 4018T 100M RoHS 10 24 0 .180 1,200 84 0 NR 4018T 150M RoHS 15 19 0 .250 940 650 NR 4018T 220M RoHS 22 16 0 .360 800 590 NR 4 018T 330M RoHS 33 12 0 .530 650 490 NR 4018T 470M RoHS 47 10 0 .650 570 420 NR 4 018T 680M RoHS 68 8. 3 1.00 470 3 20 NR 4018T 101M RoHS 100 6 .5 1.50 400 2 70 NR 4 018T 151M RoHS 150 5 .5 2.50 310 2 20 NR 4018T 221M RoHS 220 4 .0 4.00 270 1 70 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 6012T 2R5NE RoHS 2.5 ±3 0％ 45 0.09 0 2,100 1, 730 100 NR 6012T 4R0NE RoHS 4.0 39 0.105 1 ,800 1, 570 NR 6012T 5R3ME RoHS 5.3 34 0.125 1,500 1, 400 NR 6012T 6R8ME RoHS 6.8 3 0 0.165 1,300 1, 180 NR 6012T 100ME RoHS 10 22 0 .235 1,000 1, 000 NR 6012T 150ME RoHS 15 18 0 .330 800 790 NR 6 012T 220ME RoHS 22 12 0 .530 760 630 NR 6 012T 330ME RoHS 33 8 0. 700 590 530 NR 6 012T 470ME RoHS 47 6 1. 05 520 460 NR 6012T 680ME RoHS 68 3 1. 35 440 410 NR 6012T 101ME RoHS 100 1 2 .18 350 320 ※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20 ℃) ※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40 ℃. (at 20℃) ※）Th e rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
• NR 4010 Shielded type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 4010T 1R0N RoHS 1.0 ±30％ 116 0.1 00 1,800 1, 050 100 NR 4010T 2R2N RoHS 2.2 73 0.150 1 ,150 89 0 NR 4010T 3R3M RoHS 3.3 ±20％ 58 0.180 1,100 82 0 NR 4010T 4R7M RoHS 4.7 47 0.210 900 750 NR 4010T 6R8M RoHS 6.8 38 0.300 740 620 NR 4010T 100M RoHS 10 31 0.380 560 600 NR 4010T 150M RoHS 15 24 0.510 470 510 NR 4010T 220M RoHS 22 19 0.870 360 400 NR 4010T 330M RoHS 33 15 1.54 280 300 NR 4010T 470M RoHS 47 13 1.81 240 280
• NR 5040 Shielded type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±30％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 5040T 1R5N RoHS 1.5 ±30％ 60 0.02 0 6,000 3, 600 100 NR 5040T 2R2N RoHS 2.2 42 0.022 4 ,600 3, 500 NR 5040T 3R3N RoHS 3.3 32 0.027 3 ,800 3, 300 NR 5040T 4R7N RoHS 4.7 28 0.029 3,300 3, 100 NR 5040T 6R8M RoHS 6.8 ±20％ 21 0.04 9 2,600 2, 300 NR 5040T 100M RoHS 10 18 0 .056 2,300 2, 100 NR 5040T 150M RoHS 15 1 3 0.080 2,000 1, 800 NR 5040T 220M RoHS 22 9 0 .126 1 ,600 1, 400 NR 5040T 330M RoHS 33 7 0. 180 1 ,300 1, 200 NR 5040T 470M RoHS 47 6 0. 310 1 ,100 90 0

125wound04_e-01 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ■ PART NUMBERS

• NR 6020 Shielded type
• NR 6028 Sh ielded type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 6020T 0R8N RoHS 0.8 110 0.020 5,500 3, 800 100 NR 6020T 1R5N RoHS 1.5 93 0.026 4 ,000 3, 200 NR 6020T 2R2N RoHS 2.2 7 3 0.034 3,200 2, 700 NR 6020T 3R3N RoHS 3.3 5 5 0.040 2,800 2, 600 NR 6020T 4R7N RoHS 4.7 4 3 0.058 2,400 2, 000 NR 6020T 6R8N RoHS 6.8 3 0 0.085 2,000 1, 800 NR 6020T 100M RoHS 10 ±20％ 1 8 0.125 1,700 1, 400 NR 6020T 220M RoHS 22 11 0 .290 1,050 95 0 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±30％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 6028T 0R9N RoHS 0.9 90 0.01 3 6,600 4, 600 100 NR 6028T 1R5N RoHS 1.5 78 0.016 5 ,000 4, 200 NR 6028T 2R2N RoHS 2.2 6 8 0.020 4,200 3, 700 NR 6028T 3R0N RoHS 3.0 5 5 0.023 3 ,600 3, 400 NR 6028T 4R7M RoHS 4.7 39 0.031 2,700 3, 000 NR 6028T 6R0M RoHS 6.0 3 0 0.040 2 ,500 2, 500 NR 6028T 100M RoHS 10 20 0 .065 1,900 1, 900 NR 6028T 150M RoHS 15 17 0 .095 1,600 1, 800 NR 6028T 220M RoHS 22 12 0 .135 1,300 1, 400 NR 6028T 330M RoHS 33 10 0 .220 1,100 1, 100 NR 6028T 470M RoHS 47 8 0. 300 950 920 NR 6 028T 680M RoHS 68 5 0. 420 760 770 NR 6028T 101M RoHS 100 3 0 .600 620 660
• NR 6045 Shielded type
• NR 8040 Sh ielded type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±30％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 6045T 1R0N RoHS 1.0 ±30％ 110 0.014 8,500 4, 200 100 NR 6045T 1R3N RoHS 1.3 95 0.016 8 ,000 4, 000 NR 6045T 1R8N RoHS 1.8 80 0.018 7 ,000 3, 700 NR 6045T 2R3N RoHS 2.3 60 0.021 6 ,000 3, 500 NR 6045T 3R0N RoHS 3.0 45 0.024 5 ,000 3, 200 NR 6045T 4R5M RoHS 4.5 ±20％ 25 0.031 4,000 3, 000 NR 6045T 6R3M RoHS 6.3 15 0.038 3 ,800 2, 800 NR 6045T 100M RoHS 10 12 0.047 3 ,000 2, 500 NR 6045T 150M RoHS 15 10 0.077 2 ,300 1, 900 NR 6045T 220M RoHS 22 7 0.115 1 ,900 1, 500 NR 6045T 330M RoHS 33 6 0.145 1 ,500 1, 400 NR 6045T 470M RoHS 47 5 0.220 1, 300 1, 100 NR 6045T 680M RoHS 68 4 0.330 1, 000 90 0 NR 6045T 101M RoHS 100 3 0.500 8 00 700 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±30％) Rated c urrent ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NR 8040T 0R9N RoHS 0.9 ±30％ 85 0.00 6 11,000 7 ,800 100 NR 8040T 1R4N RoHS 1.4 63 0.007 9,000 7, 000 NR 8040T 2R0N RoHS 2.0 50 0.009 7 ,400 6, 300 NR 8040T 3R6N RoHS 3.6 34 0.015 5 ,300 4, 900 NR 8040T 4R7N RoHS 4.7 30 0.018 4 ,700 4, 100 NR 8040T 6R8N RoHS 6.8 24 0.025 4 ,000 3, 700 NR 8040T 100M RoHS 10 ±20％ 22 0.03 4 3,400 3, 100 NR 8040T 150M RoHS 15 16 0.050 2 ,700 2, 400 NR 8040T 220M RoHS 22 13 0.066 2,200 2, 200 NR 8040T 330M RoHS 33 12 0.100 1 ,900 1, 700 NR 8040T 470M RoHS 47 8 0.150 1, 500 1, 400 NR 8040T 680M RoHS 68 7 0.230 1 ,200 1, 100 NR 8040T 101M RoHS 100 6 0.290 1, 000 1, 000

126 wound04_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• NRG 4026 Shielded type Ordering code Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±30%) Rated current ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation current Idc1 Temperature rise current Idc2 NRG4026 T 1R2N 1.2 ±30％ 120 0.030 3,100 2, 300 100 NRG4026 T 2R3N 2.3 96 0.040 2,100 1, 970 NRG4026 T 3R5M 3.5 ±20％ 58 0.050 1,800 1, 700 NRG4026 T 4R7M 4.7 46 0.0 55 1,450 1, 600 NRG4026 T 6R6M 6.6 33 0.0 65 1,300 1, 500 NRG4026 T 100M 10 26 0.08 5 1,000 1, 300 NRG4026 T 150M 15 19 0.11 0 900 1,10 0 NRG4026 T 220M 22 13 0.16 5 610 900 NR G4026 T 330M 33 9 0.200 5 40 800 NR G4026 T 470M 47 6 0.300 4 10 650 ※）T he saturation current (Idc1) is DC current value Inductance decrease down to 30%. (at 20 ℃) ※）The tem perature rise current value (Idc2) is the DC current value having temperature increase up to 40 ℃. (at 20℃) ※）Th e rated current is Idc2.

127wound04_e-01 ˙ ELECTRICAL CHARACTERISTICS ˎ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ʢMeasured by HP4285Aʣ■DC Bias characteristics 100 10 100 1,000 10,000 NR 3010 DC BiasʤmAʥ InductanceʤЖHʥ 220M 470M 100M 4R7M 2R2M 100 10 100 1,000 10,000 NR 4012 DC BiasʤmAʥ InductanceʤЖHʥ 470M 220M 100M 2R2M 4R7M 1 . 0 0 1 1000 100 NR 6028 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 220M 100M 470M 101M 2R2 4R7 0R9 100 N NR 5040 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 220M 100M 470M 2R2N 4R7N 1000 100 10 100 1,000 10,000 NR 4018 DC BiasʤmAʥ InductanceʤЖHʥ 470M 101M 221M 220M 100M 2R2M 4R7M 1000 100 0.1 10 100 1,000 10,000 100,000 NR 6045 DC BiasʤmAʥ InductanceʤЖHʥ 220M 100M 470M 101M 2R3N 4R5N 1R0N 1000 100 10 100 1,000 10,000 NR 6012ʢE Typeʣ DC BiasʤmAʥ InductanceʤЖHʥ 220M 470M 101M 100M 5R3M 1000 100 0.1 10 100 1,000 10,000 100,000 NR 8040 DC BiasʤmAʥ InductanceʤЖHʥ 220M 100M 470M 101M 2R0N 4R7N 0R9N 1 . 0 0 1 0 0 1 NR 6020 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 220M 100M 4R7M 2R2M 0R8N 0 0 1 0 1 NRG 4026 10 100 1,000 10,000 DC BiasʤmAʥ 220M 470M 100M 4R7M 2R3N InductanceʤЖHʥ 100 10 100 1,000 10,000 NR 3012 DC BiasʤmAʥ InductanceʤЖHʥ 220M 470M 100M 4R7M 2R2M 100 10 100 1,000 10,000 NR 3015 DC BiasʤmAʥ InductanceʤЖHʥ 220M 470M 100M 4R7M 2R2M 100 10 100 1,000 10,000 NR 4010 DC BiasʤmAʥ InductanceʤЖHʥ 470M 220M 100M 2R2N 4R7M

128 wound05_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS /STANDARD QUANTI TY ■ APPLICATIONS ■ AVAILABLE INDUCTANCE RANGE ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦ Small and Low profile inductor. ◦ It corresponds to High current. ◦ Simpl e and original magnetic shield structure. ◦ Durab le structure against dropping impact. ◦ For sma ll DC/DC converter (cellu lar Phone, HDD, DVC, DSC, PDA, LCD display etc). SMD INDUCTORS SMALL AND LARGE CURRENT TYPE ❶Type NRH NRS NRV Coating resin specification ❸Packaging T△ Tape & Reel △＝Blank Space ❹Nominal inductance 〔μH〕 example 2R2 2.2 100 10 101 100 ※R＝decimal point ❺Inductance tolerance M ±20% N ±30% ❻Internal code ○○○ Standard products ○＝Blank Space ❷External dimensions （W×L×H） example 2410 2.4×2.4×1.0mm 3010 3.0×3.0×1.0mm 3012 3.0×3.0×1.2mm 5012 5.0×5.0×1.2mm 5014 5.0×5.0×1.4mm 5020 5.0×5.0×2.0mm 6010 6.0×6.0×1.0mm REFLOW N R H 2 4 1 0 T △ 1 0 0 M ○ ○ ○ ❶ ❷ ❸ ❹ ❺ ❻ Type L W H e f Standard Quantity [pcs] Tape & Ree l NRH2410 2.4±0.1 （0.095±0.004） 2.4±0.1 （0.095±0.004） 1.0 max （0.039 max ） 0.6±0.2 （0.024±0.008） 1.45±0.2 （0.057±0.008） 2500 NRH3010 3.0±0.1 （0.118±0.004） 3.0±0.1 （0.118±0.004） 1.0 max 0.9±0.2 （0.035±0.008） 1.9±0.2 （0.075±0.008） 2000（0.039 max ） NRH301 NRV3012 1.2 max 2000（0. 047 max） Unit：mm（inch） Type L W H e Δe f Δℓ Standard Quantity [pcs] Tape & Ree l NRS5012 4.9±0.2 （0.193±0.008） 4.9±0.2 （0.193±0.008） 1.2 max （0.047 max） 1.2±0.2 （0.047±0.008） 0.3±0.2 （0.011±0.008） 3.3±0.2 （0.130±0.008） 1.3±0.3 （0.051±0.011） 1000 NRS5014 1.4 max （0.055 max） 1000 NRS5020 2.0 max （0.079 max） 800 NRS6010 6.0±0.2 （0.236±0.008） 6.0±0.2 （0.236±0.008） 1.0 max （0.039 m ax） 1.35±0.2 （0.053±0.008 ） 0.3±0.2 （0.011±0.008） 4.0±0.2 （0.157±0.008） 2.3±0.3 （0.091±0.011） 1000 Unit：mm（inch） L W e e f H L W f e e H ϶ Ὑ 0. 7 2.0 1.45 0. 7 ʲNRH2410ʳ 0.8 2.7 2.2 0.8 ʲNR3010, NRH3012, NRV3012ʳ 3.6 1.5 4.0 1.5 ʲNRS5012, NRS5014, NRS5020ʳ 1.6 1.6 5.7 ʲNRS6010ʳ 4.7 Recommended Land Patterns Range Type NRH2410 NRH3010 NRH3012 NRV3012 NRS5012 NRS5014 NRS5020 NRS6010 1.0 Imax [mA] Rdc±20％ ［Ω］ Imax [mA] Rdc±20％ ［Ω］ Imax [mA] Rdc±20％ ［Ω］ Imax [mA] Rdc±20％ ［Ω］ Imax [mA] Rdc±20％ ［Ω］ Imax [mA] Rdc±20％ ［Ω］ Imax [mA] Rdc±20％ ［Ω］ Imax [mA] Rdc±20％ ［Ω］ 4.7 450 0.690 600 0.350 720 0.270 1100 0.120 850 0.420 2800 0.045 1900 0.090 1800 0.100 1300 0.120 1000 0.270 300 1.47 380 0.770 500 0.630 900 0.260 100 Inductance ［μH］

129wound05_e-01 ■ PART NUMBERS

• NRH 2410 Shielded type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20%) Rated current ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation curren t Idc1 Temperature rise current Idc2 NRH2410T R68NN 4 RoHS 0.68 ±30％ 120 0.0 60 2,200 1, 570 100 NRH2410T 1R0NN 4 RoHS 1.0 106 0.07 0 1,800 1, 410 NRH2410T 1R5MN RoHS 1.5 ±20％ 94 0.11 0 1,550 1, 160 NRH2410T 2R2MN RoHS 2.2 77 0.150 1,290 97 0 NRH2410T 3R3MN RoHS 3.3 56 0.220 1 ,000 77 0 NRH2410T 4R7MN RoHS 4.7 50 0.290 8 80 670 NR H2410T 6R8MN RoHS 6.8 43 0.410 7 50 570 NR H2410T 100MN RoHS 10 32 0.690 5 50 450 NR H2410T 150MN RoHS 15 27 1.02 4 70 370 NR H2410T 220MN RoHS 22 22 1.47 3 90 300 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated current ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation curren t Idc1 Temperature rise current Idc2 NRV3012T 2R2M RoHS 2.2 ±20％ 70 0.12 0 1,800 1, 100 100 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated current ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation curren t Idc1 Temperature rise current Idc2 NRS5014T 1R2N RoHS 1.2 ±30％ 86 0.045 3,800 2,800 100 NRS5014T 2R2N RoHS 2.2 56 0.065 2,800 2,300 NRS5014T 3R3N RoHS 3.3 48 0.080 2,350 2,100 NRS5014T 4R7N RoHS 4.7 41 0.100 2,050 1,800 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
• NRH 3010 Type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20%) Rated current ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation curren t Idc1 Temperature rise current Idc2 NRH3010T 1R2N RoHS 1.2 ±30％ 120 0.0 65 1,700 1, 480 100 NRH3010T 1R5N RoHS 1.5 99 0.075 1 ,440 1, 370 NRH3010T 2R2M RoHS 2.2 ±20％ 86 0.08 3 1,300 1, 300 NRH3010T 3R3M RoHS 3.3 64 0.130 1,000 1, 030 NRH3010T 4R7M RoHS 4.7 50 0.170 8 50 900 NR H3010T 6R8M RoHS 6.8 44 0.250 7 00 745 NR H3010T 100M RoHS 10 34 0.350 600 620 NR H3010T 150M RoHS 15 25 0.550 4 50 480 NR H3010T 220M RoHS 22 22 0.770 3 80 410
• NRH 3012 Type
• NRS 5012 T ype
• NRS 5014 T ype Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated current ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation curren t Idc1 Temperature rise current Idc2 NRH3012T 1R0N RoHS 1.0 ±30％ 111 0.0 48 2,200 1, 710 100 NRH3012T 1R5N RoHS 1.5 95 0.055 1 ,700 1, 600 NRH3012T 2R2M RoHS 2.2 ±20％ 78 0.075 1,500 1, 370 NRH3012T 3R3M RoHS 3.3 61 0.100 1,200 1, 210 NRH3012T 4R7M RoHS 4.7 50 0.130 1 ,000 1, 060 NRH3012T 6R8M RoHS 6.8 43 0.190 8 50 890 NR H3012T 100M RoHS 10 32 0.270 730 720 NR H3012T 150M RoHS 15 26 0.450 5 30 570 NR H3012T 220M RoHS 22 22 0.630 500 500 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated current ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation curren t Idc1 Temperature rise current Idc2 NRS5012T 1R0N RoHS 1.0 ±30％ 100 0.0 53 4,500 2, 300 100 NRS5012T 1R5N RoHS 1.5 86 0.070 3 ,800 2, 200 NRS5012T 2R2M RoHS 2.2 ±20％ 70 0.08 5 3,100 2, 000 NRS5012T 3R3M RoHS 3.3 48 0.160 2 ,400 1, 450 NRS5012T 4R7M RoHS 4.7 40 0.180 2 ,200 1, 400 NRS5012T 6R8M RoHS 6.8 36 0.260 1 ,700 1, 100 NRS5012T 100M RoHS 10 26 0.420 1 ,400 85 0
• NRV 3012 Type

130 wound05_e-01 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated current ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation curren t Idc1 Temperature rise current Idc2 NRS5020T 1R0N RoHS 1.0 ±30％ 81 0.02 1 4,000 3, 600 100 NRS5020T 1R5N RoHS 1.5 68 0.026 3 ,350 3, 200 NRS5020T 2R2N RoHS 2.2 57 0.035 2 ,900 2, 900 NRS5020T 3R3N RoHS 3.3 46 0.048 2 ,400 2, 400 NRS5020T 4R7M RoHS 4.7 ±20％ 37 0.06 0 2,000 2, 000 NRS5020T 6R8M RoHS 6.8 30 0.090 1 ,600 1, 650 NRS5020T 100M RoHS 10 24 0.120 1,300 1, 450 NRS5020T 150M RoHS 15 20 0.165 1,100 1, 200 NRS5020T 220M RoHS 22 17 0.260 9 00 1,00 0 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy 〔MHz〕 (min.) DC Resis tance [Ω] (±20％) Rated current ※） 〔mA〕 Measu ring freque ncy 〔kHz〕 Saturation curren t Idc1 Temperature rise current Idc2 NRS6010T 1R5N RoHS 1.5 ±30％ 90 0.090 2,400 1, 900 100 NRS6010T 2R2N RoHS 2.2 65 0.110 1,900 1, 700 NRS6010T 3R3N RoHS 3.3 50 0.135 1,600 1, 500 NRS6010T 4R7N RoHS 4.7 38 0.165 1,300 1, 400 NRS6010T 6R8N RoHS 6.8 30 0.220 1,200 1, 200 NRS6010T 100M RoHS 10 ±20％ 25 0.270 1,000 1, 100 ※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20 ℃) ※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40 ℃. (at 20℃) ※）Th e rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.

• NRS 5020 Type
• NRS 6010 T ype

131wound05_e-01 ■ ELECTRICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1 . 0 0 1 0 0 1 NRH 2410 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 220M 100M 4R7M 2R2M 1R0N ■DC Bias characteristics 1 . 0 0 1 0 0 1 NRH 2410 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 220M 100M 4R7M 2R2M 1R0N 1 . 0 0 1 0 0 1 NRS 5012 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 100M 4R7M 2R2M 1R0N 1 . 0 0 1 0 0 1 NRH 3010 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 220M 100M 4R7M 2R2M 1 . 0 0 1 0 0 1 NRS 5014 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 4R7M 1R2N 1 . 0 0 1 0 0 1 NRH 3012 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 220M 100M 4R7M 2R2M 1R0N 1 . 0 0 1 0 0 1 NRS 5020 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 4R7M 100M 200M 2R2N 1R0N 1 . 0 0 1 0 0 1 NRV 3012 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 2R2M 1 . 0 0 1 0 0 1 NRS 6010 10 100 1,000 10,000 DC BiasʤmAʥ InductanceʤЖHʥ 4R7M 100M 2R2N （Measured by HP4285A）

wound0405_pack-P1 wound0405_pack_e-01 ■ PACKAGING ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦Embossed tape 8mm wide (0.315 inches wide) ①Minimu m Quanti ty CHIP cavityП1.5 ʢ0.059 ʣ 1.75ʶ0.1 ʢ0.069ʶ0.004ʣ 4.0ʶ0.1 ʢ0.157ʶ0.004ʣ 2.0ʶ0.05 ʢ0.079ʶ0.002ʣ 3.5ʶ0.1 ʢ0.138ʶ0.004ʣ 8.0ʶ0.2 ʢ0.315ʶ0.008ʣ K T F A ʴ0.1 ʴ0.004 B Electrodeʢbottom viewʣ ②Tape Material ③Taping dimensions ④Leader and Blank portion Type Chip cavity Insertion pitch Tape thickness A B F T K Unit : mm (inch) ◦Embossed tape 12mm wide (0.47 inches wide) ◦Emboss ed tape 16mm wide (0.63 in ches wide) CHIP cavity Electrodeʢbottom viewʣ П1.5 ʢ0.059 ʣ 1.75ʶ0.1 ʢ0.069ʶ0.004ʣ 4.0ʶ0.1 ʢ0.157ʶ0.004ʣ 2.0ʶ0.1 ʢ0.079ʶ0.004ʣ 5.5ʶ0.1 ʢ0.217ʶ0.004ʣ 12.0ʶ0.3 ʢ0.472ʶ0.012ʣ K T F A ʴ0.1 ʴ0.004 B Electrodeʢbottom viewʣ K T B CHIP cavityF A 2.0ʶ0.1 ʢ0.079ʶ0.004ʣ П1.5ʶ0.1 ʢ0.059ʶ0.004ʣ 4.0ʶ0.1 ʢ0.157ʶ0.004ʣ 1.75ʶ0.1 ʢ0.069ʶ0.004ʣ 7.5ʶ0.1 ʢ0.295ʶ0.004ʣ 16.0ʶ0.3 ʢ0.630ʶ0.012ʣ 100mm or more (3.94 inches or more) 400mm or more (15.8 inches or more) Blank portions Blank portionsChip cavity Leader Direction of tape feed 160mm or more (6.3 inches or more) ◦NR, NRH, NRS, NRG, NRV Type Standard Quantity [pcs] Tape ＆ Reel NRH 2410 2 500 NR 3 010/NRH 3010 2000 NR 3012/NRH3012/NRV3012 2000 NR 3015 2000 NR 40 10 5000 NR 40 12 4500 NR 40 18 3500 NRG 4026 2000 NRS5012 1000 NRS5014 1000 NRS5020 800 NR 5040 1500 NRS 6010 1000 NR 6012 1000 NR 60 20 2500 NR 60 28 2000 NR 60 45 1500 NR 80 40 1000 Type Chip cavity Insertion pitch Tape thickness A B F T K NRH 2410 2.6±0.1 2.6±0.1 4.0±0.1 （0.157±0.004） 0.25±0.05 1.3±0.1 NR 3010 NRH 3010 3.2±0.1 （0.126±0.004） 3.2±0.1 （0.126±0.004） 0.3±0.05 （0.012±0.002） 1.4±0.1 （0.055±0.004） NR 3012 NRH 3012 NRV3012 1.6±0.1 （0.063±0.004） NR 3015 1.9±0.1 （0.075±0.004） Unit : mm (inch) Type Chip cavity Insertion pitch Tape thickness A B F T K NR 4010 4.3±0.1 （0.169±0.004） 4.3±0.1 （0.169±0.004） 8.0±0.1 （0.315±0.004） 0.3±0.05 （0.012±0.002） 1.4±0.1 （0.055±0.004） NR 4012 1.6±0.1 （0.063±0.004） NR 4018 2.1±0.1 （0.083±0.004） NRG 4026 3.1±0.1 （0.122±0.004） NRS 5012 5.25±0.1 （0.207±0.004） 5.25±0.1 （0.207±0.004） 1.4±0.1 （0.055±0.004） NRS 5014 1.6±0.1 （0.063±0.004） NRS 5020 2.3±0.1 （0.091±0.004） NR 5040 5.15±0.1 （0.203±0.004） 5.15±0.1 （0.203±0.004） 0.4±0.1 （0.016±0.004） 4.2±0.1 （0.165±0.004） NRS 6010 6.3±0.1 （0.248±0.004） 6.3±0.1 （0.248±0.004） 1.4±0.1 （0.055±0.004） NR 6012 1.6±0.1 （0.063±0.004） NR 6020 2.3±0.1 （0.090±0.004） NR 6028 3.1±0.1 （0.122±0.004） NR 6045 4.7±0.1 （0.185±0.004） Unit : mm (inch)

wound0405_pack-P2wound0405_pack_e-01 ■ PACKAGING ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. П13ʶ0.5 W ПD Пd 2ʶ0.5 2.5 or less ʢ0.098inches or lessʣ ⑤Reel size ⑥Top Tape Strength П13ʶ0.5 W t ПD Пd 2ʶ0.5 The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as illustrated below. Type Reel size (Reference values) φD φd W NRH2410 180±0.5 （7.087±0.019） 60±1.0 （2.36±0.04） 10.0±1.5 （0.394±0.059） NR 3010 NRH 3010 N R 3012 NR H 3012 N RV 3012 N R 3015 NR S 5012 80±3.0 .087±0.118） 60±2.0 （2.36±0.08） 14.0±1.5 （0.551±0.059） NRS 5014 NRS 5020 N RS 6010 N R 6012 Unit : mm (inch) Type Reel size (Reference values) φD φd t (max.) W NR 4010 330±3.0 2.99±0.118） 80±2.0 （3.15±0.078） 18.5 （0. 72） 13.5±1.0 （0.531±0.04） NR 4012 NR 4018 NR G 4026 N R 5040 NR 6 020 NR 6 028 NR 6 045 NR 8 040 22 .5 17. 5±1.0 Unit : mm (inch)

132 wound06_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS /STANDARD QUANTI TY ■ APPLICATIONS ■ AVAILABLE INDUCTANCE RANGE ■ PART NUMBERS

• NR 10050 type ※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20 ℃) ※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40 ℃. (at 20℃) ※）Th e maximum rated current is the DC current value that satisfies both of current value Saturation current value and temperature rise current value. (at 20 ℃) Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy [MHz] (min.) DC Resis tance [Ω] (±30%) Rated current ※） [mA] Mea suring freque ncy [kHz] Satura tion current Idc1 Temperature rise current Idc2 NR10050T1R3N RoHS 1.3 ±30％ 53 0.00 68 11000 90 00 100 NR10050T2R1N RoHS 2.1 37 0.008 10000 8300 NR10050T2R9N RoHS 2.9 29 0.0093 8200 730 0 NR10050T3R8N RoHS 3.8 26 0.013 7300 6800 NR10050T4R9N RoHS 4.9 23 0.015 6600 6000 NR10050T6R5N RoHS 6.5 19 0.018 6000 5200 NR10050T100M RoHS 10 ±20％ 15 0.025 4700 4100 NR10050T150M RoHS 15 11 0.035 3600 3200 NR10050T220M RoHS 22 10 0.045 2600 2500 NR10050T330M RoHS 33 8.2 0.066 2500 2100 NR10050T470M RoHS 47 7.0 0.092 2000 1800 NR10050T680M RoHS 68 5.6 0.144 1700 1500 NR10050T101M RoHS 100 4.6 0.209 1300 1200 NR10050T221M RoHS 220 3.0 0.450 1000 800 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦ SMD inductor. ◦ It corresponds to High current. ◦ Simpl e and original magnetic shield structure. ◦ Power supply circuits / DC-DC converters in a variety of applications such as PDP TV, LCD TV, HDD, PC, etc. SMD INDUCTORS LARGE CURRENT TYPE Type L W H a b Standard Quanti ty [pcs] Tape & Ree l NR 10050 1 Unit : mm (inch) ❶Type NR△ Coating resin specification △＝Blank Space ❸Packaging T△ Tape & Reel △＝Blank Space ❹Nominal inductance 〔μH〕 example 1R3 1.3 100 10 101 100 ※R＝decimal point ❺Inductance tolerance M ±20% N ±30% ❻Internal code △ Standard product △＝Blank Space ❷External dimensions (W×H) example 10050 10.0×5.0mm N R △ 1 0 0 5 0 T △ 1 0 0 M △ ❶ ❷ ❸ ❹ ❺ ❻ L H W b b a Range Type NR 10050 Imax [A] R dc±30％ [mΩ] .0 9 6.8 .1 2510 1.2 209100 220 0.8 450 Inductance ［μH］ Recommended Land Patterns 2.6 2.6 4.5 5.4 Surface Mounting ・Mounting and soldering conditions should be checked beforehand. ・Applicable soldering process to these products is reflow solder ing only. Unit : m m

133wound06_e-01 ■ ELECTRICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ■DC Bias characteristics 1000.0 100.0 10.0 1.0 0.1 0.1 1.0 10.0 100.0 NR 10050 DC BiasʤAʥ InductanceʤЖHʥ 221M 101M 680M 470M 330M 220M 150M 100M 1R3N 6R5N 4R9N 3R8N 2R9N 2R1N （Measured by HP4285A）

wound06_pack-P1wound06_pack_e-01 ■ PACKAGING ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦Embossed tape 24mm wide (0.945 inches wide) ①Minimu m Quanti ty Type Standard Quantity [pcs] Tape & Reel NR 10050 5 П1.5 ʢ0.059 ʣ 4.0ʶ0.1 ʢ0.157ʶ0.004ʣ 1.75ʶ0.1 ʢ0.069ʶ0.004ʣ 2.0ʶ0.1 ʢ0.079ʶ0.004ʣ ʴ0.1 ʴ0.004 KF T B 16.0ʶ0.1 ʢ0.63ʶ0.004ʣ 11.5ʶ0.1 ʢ0.453ʶ0.004ʣ 24.0ɹɹ ʢ0.945 ʣ ʴ0.3 ʔ0.1 ʴ0.012 ʔ0.004 A ②Tape Material ③Taping dimensions Type Chip cavity Insertion pitch Tape thickness A B F T K Unit : mm (inch) ④Leader and Blank portion 40 to 50 pockets 1role of reel Blank portions Chip cavity Blank portionsCover Tape Leader Direction of tape feed 100 to 200mm ʢ3.94 to 7.87 inchesʣ 20 to 30 pockets П13ʶ0.5 ʢП0.512ʶ0.020ʣ П13ʶ0.5 25.5ʶ1.0 ʢ1.004ʶ0.04ʣ t ПD Пd 2ʶ0.5 ʢ0.079ʶ0.020ʣ ʢП0.512ʶ0.020ʣ ⑤Reel size Type Reel size (Reference values) φD φd t (max.) NR 10050 330±3 80±2 30. 5 Unit : mm (inch) ⑥Top Tape Strength The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.

134 wound07_e-01 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS /STANDARD QUANTI TY ■ APPLICATIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦ BR C2518/BRFL2518 (NEW PRODUCTS) The best efficiency design is achieved by adopting bottom-surface elec- trode structure.Small and low-profile Wound Chip Inductors that are suitable for module design which needs high electric current like DC/DC converters. ◦ For small DC/DC converter (cellu lar phone, HDD, DVC, DSC, PDA, LCD display etc). SMD INDUCTORS COMPACT TYPE ❶Type BR SMD Inductors ❹Packaging T Tape & Reel ❺Nominal Inductance 〔μH〕 example R20 0.2 1R0 1.0 2R2 2.2 4R7 4.7 ※R＝decimal point ❻Inductance tolerance M ±20% K ±10% ❼Internal code △△△ Standard product △＝Blank Space ❸External Dimensions (W ×L) : mm (i n ch) 1608 (0603) 1.6×0.8m m 2012 (0805) 2.0×1.2m m 2016 (0806) 2.0×1.6m m 2518 (1007) 2.5×1.8m m 3225 (1210) 3.2×2.5m m B R △ 2 5 1 8 T 2 R 2 M △ △ △ ❶ ❷ ❸ ❹ ❺ ❻ ❼ L H W e ■ AVAILABLE INDUCTANCE RANGE Recommended Land Patterns A A C B Surface Mounting ・Mounting and soldering conditions should be checked beforehand. ・Applic able solder ing process to this products is reflow soldering only. ❷Characteristic Spec △ Low Rdc L Low profile C High Cur rent FL Low pro file Type A B C 1608 0.55 0.80 0.90 2012 0.65 0.90 1.40 2016 0.70 0.80 1.80 2518 0.65 1.50 1.95 3225 1.00 1.60 2.70 Unit : mm REFLOW Type L W H e Standard Quantity [pcs] Paper Ta pe Emboss ed Tape BR C1608 1 Unit : mm (inch) Range Type BR L3225 BRFL25 18 BR L2518 BR C2518 B R C2016 B R L2012 B R C1608 Imax [mA] Rdc±30％ [Ω] Imax [mA] Rdc±30％ [Ω] Imax [mA] Rdc±30％ [Ω] Imax [mA] Rdc±30％ [Ω] Imax [mA] Rdc±30％ [Ω] Imax [mA] Rdc±30％ [Ω] Imax [mA] Rdc±30％ [Ω] 1,050 0.47μH 0.090 980 0.2μH 0.060 2.2 850 0.135 850 0.135 280 2.2μH 0.550 4.7 470 0.400 650 4.7μH 0.330 4.7μH 10 700 0.350 610 0.350 520 0.400 270 0.850 100 250 2.50 220 100μH 190 100μH 3.60 170 100μH 3.40 85 100μH 7.70 Inductance ［μH］

135wound07_e-01 ■ PART NUMBERS

• BR C1608 type
• BR L2012 t ype
• BR C2016 t ype Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy [MHz] (min.) DC Resis tance [Ω] (±30%) Rated c urrent ※） [mA] Mea suring freque ncy [MHz] Satura tion current Idc1 Temperature rise current Idc2 BR C1608TR20M RoHS 0.20 ±20％ 400 0.0 60 1,750 98 0 7.96 B R C1608TR35M RoHS 0.35 300 0.08 0 1,400 81 0 BR C 1608TR45M RoHS 0.45 200 0.090 1,250 80 0 BR C 1608TR56M RoHS 0.56 170 0.095 1,150 76 0 BR C 1608TR77M RoHS 0.77 150 0.110 1,000 66 0 BR C 1608T1R0M RoHS 1.00 140 0.18 0 850 520 BR C1608T1R5M RoHS 1.50 120 0.30 0 700 410 BR C1608T2R2M RoHS 2.20 100 0.55 0 550 280 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy [MHz] (min.) DC Resis tance [Ω] (±30%) Rated c urrent ※） [mA] Mea suring freque ncy [MHz] Satura tion current Idc1 Temperature rise current Idc2 BR L2012TR47M RoHS 0.47 ±20％ 350 0.090 1,100 1,050 7.96 BR L2012T1R0M RoHS 1.0 300 0.13 5 850 850 BR L 2012T1R5M RoHS 1.5 250 0.18 0 700 750 BR L 2012T2R2M RoHS 2.2 200 0.30 0 600 550 BR L 2012T3R3M RoHS 3.3 190 0.50 0 490 440 BR L 2012T4R7M RoHS 4.7 150 0.55 0 340 400 BR L 2012T6R8M RoHS 6.8 60 0.750 2 90 350 BR L2012T100M RoHS 10 30 0.850 2 70 330 BR L2012T150M RoHS 15 15 1.00 2 20 300 BR L2012T220M RoHS 22 13 1.30 19 0 270 BR L2012T330M RoHS 33 8.0 2.00 1 50 220 BR L2012T470M RoHS 47 7.0 3.50 1 25 160 BR L2012T680M RoHS 68 6.5 5.80 1 00 110 BR L2012T101M RoHS 100 6.0 7.70 85 85 0.79 6 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy [MHz] (min.) DC Resis tance [Ω] (±30%) Rated c urrent ※） [mA] Mea suring freque ncy [MHz] Satura tion current Idc1 Temperature rise current Idc2 BR C2016T1R0M RoHS 1.0 ±20％ 450 0.0 85 1,350 1, 100 0.10 BR C2016T1R5M RoHS 1.5 370 0.15 0 1,100 820 BR C2016T2R2M RoHS 2.2 250 0.18 0 910 760 BR C2016T3R3M RoHS 3.3 140 0.22 0 740 680 BR C2016T4R7M RoHS 4.7 78 0.270 66 0 610 BR C2016T6R8M RoHS 6.8 39 0.330 5 50 560 BR C2016T100 □ RoHS 10 ±20％ ±10％ 35 0.4 00 450 520 BR C2016T150 □ RoHS 15 28 0.600 4 00 410 BR C2016T220 □ RoHS 22 24 1.00 31 0 310 BR C2016T330 □ RoHS 33 13 1.70 27 0 240 BR C2016T470 □ RoHS 47 11 2.20 21 0 210 BR C2016T680 □ RoHS 68 8 2.80 200 1 90 BR C2016T101 □ RoHS 100 7 3.40 140 1 70 ・Please specify the inductance tolerance code. (M or K) ※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20 ℃) ※）The tem perature rise current value (Idc2) is the DC current value having temperature increase up to 40 ℃. (at 20℃) ※）Th e rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value.
• BR C2518 type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy [MHz] (min.) DC Resist ance [Ω] (±30%) Rated current ※） [mA] Mea suring freque ncy [MHz] Satura tion curren t Idc1 Temperature rise current Idc2 BR C2518T1R0M RoHS 1.0 ±20％ 280 0.0 50 2,550 1, 650 1.00 BR C2518T1R5M RoHS 1.5 230 0.08 0 2,100 1, 300 BR C2518T2R2M RoHS 2.2 200 0.12 0 1,800 1, 000 BR C2518T3R3M RoHS 3.3 150 0.17 5 1,450 86 0 BR C2518T4R7M RoHS 4.7 100 0.23 0 1,250 75 0 BR C2518T6R8M RoHS 6.8 45 0.280 1,050 68 0 BR C2518T100 □ RoHS 10 ±20％ ±10％ 20 0.3 50 890 610 BR C2518T150 □ RoHS 15 13 0.43 76 0 550 BR C2518T220 □ RoHS 22 10 0.56 6 40 490 BR C2518T330 □ RoHS 33 8 0.85 56 0 390 BR C2518T470 □ RoHS 47 6.5 1.45 4 10 300 BR C2518T680 □ RoHS 68 5.5 2.40 3 40 230 BR C2518T101 □ RoHS 100 4.5 3.60 300 190 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

136 wound07_e-01 ・Please specify the inductance tolerance code. (M or K) ※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20 ℃) ※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40 ℃. (at 20℃) ※）Th e rated current is the DC current value that satisfies both of DC saturation current value and temperature rise current value. ■ PART NUMBERS

• BR L2518 type
• BRFL25 18 type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy [MHz] (min.) DC Resist ance [Ω] (±30%) Rated current ※） [mA] Mea suring freque ncy [MHz] Satura tion curren t Idc1 Temperature rise current Idc2 BR L2518T1R0M RoHS 1.0 ±20％ 130 0.080 1,300 1, 000 7.96 BR L2518T1R5M RoHS 1.5 100 0.100 1,200 92 0 BR L2518T2R2M RoHS 2.2 80 0.135 900 850 BR L2518T3R3M RoHS 3.3 70 0.300 750 580 BR L2518T4R7M RoHS 4.7 60 0.400 650 470 Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy [MHz] (min.) DC Resist ance [Ω] (±30%) Rated current ※） [mA] Mea suring freque ncy [MHz] Satura tion curren t Idc1 Temperature rise current Idc2 BRFL2518T1R0M RoHS 1.0 ±20％ 130 0.090 1,200 1, 200 1.00 BRFL2518T1R5M RoHS 1.5 100 0.110 1100 100 0 BRFL2518T2R2M RoHS 2.2 80 0.130 850 950 BR FL2518T3R3M RoHS 3.3 70 0.220 700 700 BR FL2518T4R7M RoHS 4.7 60 0.330 650 650
• BR L3225 type Ordering code EHS (Environmental Hazardous Substances ) Inductance [μH] Inductance Tolera nce Self-resonant freque ncy [MHz] (min.) DC Resist ance [Ω] (±30%) Rated current ※） [mA] Mea suring freque ncy [MHz] Satura tion curren t Idc1 Temperature rise current Idc2 BR L3225T1R0M RoHS 1.0 ±20％ 220 0.0 43 2,400 2, 200 0.10 BR L3225T1R5M RoHS 1.5 170 0.04 5 2,200 1, 750 BR L3225T2R2M RoHS 2.2 150 0.06 5 1,850 1, 600 BR L3225T3R3M RoHS 3.3 140 0.12 0 1,450 1, 200 BR L3225T4R7M RoHS 4.7 120 0.18 0 1,300 1, 000 BR L3225T6R8M RoHS 6.8 90 0.270 1 ,050 77 0 BR L3225T100 □ RoHS 10 ±20％ ±10％ 70 0.3 50 900 700 BR L3225T150 □ RoHS 15 20 0.570 7 00 530 BR L3225T220 □ RoHS 22 13 0.690 5 50 470 BR L3225T330 □ RoHS 33 9 0.840 47 0 420 BR L3225T470 □ RoHS 47 7 1.00 420 3 90 BR L3225T680 □ RoHS 68 6 1.40 330 3 00 BR L3225T101 □ RoHS 100 5 2.50 270 2 50 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

137wound07_e-01 ˙ ELECTRICAL CHARACTERISTICS ■DC Bias characteristics InductanceʢЖHʣ DC BIASʢmAʣ BRL3225 0.1 10 100 1000 10000 101˘ 100˘ 1R0M InductanceʢЖHʣ DC BIASʢmAʣ BRC1608 0.1 1 1 0 100 1000 10000 R77M 2R2M R20M InductanceʢЖHʣ DC BIASʢmAʣ BRL2518 0.1 1 1 0 100 1000 10000 4R7M 2R2M 1R0M InductanceʢЖHʣ DC BIASʢmAʣ BRFL2518 0.1 1 1 0 100 1000 10000 4R7M 2R2M 1R0M InductanceʢЖHʣ DC BIASʢmAʣ BRC2518 0.1 100 1 1 0 100 1000 10000 101˘ 100˘ 1R0M InductanceʢЖHʣ DC BIASʢmAʣ BRC2016 0.1 100 1 1 0 100 1000 10000 101˘ 100˘ 1R0M InductanceʢЖHʣ DC BIASʢmAʣ BRL2012 0.1 100 1000 1 1 0 100 1000 10000 101M 100M 1R0M ʢMeasured by HP4285A ʣ ■Impedance-vs-Frequency characteristics ImpedanceʢЊʣ FrequencyʢMHzʣ BRL3225 100000 100 1000 10000 1 1 0 100 1000 10000 101˘ 100˘ 1R0M ImpedanceʢЊʣ FrequencyʢMHzʣ BRC1608 10000 1000 100 1 1 0 100 1000 R77M 2R2M R20M ImpedanceʢЊʣ BRL2518 100 1000 10000 FrequencyʢMHzʣ 1 1 0 100 1000 4R7M 2R2M 1R0M ImpedanceʢЊʣ BRFL2518 100 1000 10000 FrequencyʢMHzʣ 1 1 0 100 1000 10000 4R7M 2R2M 1R0M ImpedanceʢЊʣ FrequencyʢMHzʣ BRC2016 100000 10000 1000 100 0.1 0.1 1 1 0 100 1000 101˘ 100˘ 1R0M ImpedanceʢЊʣ FrequencyʢMHzʣ BRC2518 100000 10000 1000 100 1 1 0 100 1000 10000 101˘ 100˘ 1R0M ImpedanceʢЊʣ FrequencyʢMHzʣ BRL2012 100000 10000 1000 1000 1 1 0 100 1000 101M 100M 1R0M ʢMeasured by HP4291A ʣ ˎ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound07_pack-P1wound07_pack_e-01 ■ PACKAGING ＊ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ◦Embossed Tape 8mm wide ( 0.315 in ches wide) ◦Card boa rd carrier tape 8mm wide (0.315 inches wide) ①Minimu m Quanti ty ②Tape Material ③Taping dimensions ④Leader and Blank portion 160 to 200 mm ʢ6.3 to 7.87 inchesʣ Blank portions Chip cavity Blank portions Leader Direction of tape feed 160 to 320mm ʢ6.3 to 12.8 inchesʣ 400 to 560 mm ʢ16.0 to 22.4 inchesʣ 10.0ʶ1.5 (0.394ʶ0.059) 2.5 or less ʢ0.098maxʣ П180 ʢП7.09 ) ʵ0.118 П60 ʢП2.36 )ʴ1 ʴ0.039 ⑤Reel size ⑥Top Tape Strength The top tape requires a peel-off force of 0.2 to 0.7N in the direction of the arrow as illustrated below. Type Standard Quantity [pcs] Paper Tape Emboss ed Tape BR C1608 ー 3 ,000 BR L 2012 ー 3 ,000 BR C 2016 ー 2 ,000 BR C 2518 ー 2,000 BR L 2518 ー 3,000 BR FL25 18 ー 3,000 BR L3225 ー 2 ,000 Type Chip cavity Insertion pitch Tape thickness A B F T K BR C2518 2.15±0.1 （0.085±0.004） 2.7±0.1 （0.107±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.2 max. （0.086） Unit : mm (inch)

wound0407_reli-RP1 wound0407_reli_e-01 ˙ RELIABILITY DATA ˎ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1. Operating Temperature Range BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type ʔ25ʙʴ105ˆ NR30/40/50/60/80, NRV30 , N RG40, NRH24/30, NRS50 / 60 Type ʔ25ʙʴ120ˆ NR10050 Type ʔ25ʙʴ105ˆ ʲTe st Method and Remarks ʳ Includ ing self-generated heat 3. Rated current BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Within the specified toleranceNR30/40/50/60/80, NRV30, N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type 4. Inductance BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Within the specified toleranceNR30/40/50/60/80, NRV30, N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : LCR Meter : HP 4285A or equivalent, Measuring frequency : Specified frequency NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : LCR Meter : HP 4285A or equivalent, 100KHz, 1V NR10050 Type : LCR Me t er : HP 4263A or equivalent, 100KHz, 1V 5. DC Resistance BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Within the specified toleranceNR30/40/50/60/80, NRV30, N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ DC ohmme ter : HIOKI 3227 or equivalent 6. Self resonance frequency BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Within the specificationNR30/40/50/60/80, NRV30, N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : Inpe d ance analy z er/material analyzer : HP4291A or equivalent HP4191A, 4192A or equivalent 2. Storage Temperature Range BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type ʔ40ʙʴ85ˆNR30/40/50/60/80, NRV30, N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : 0 to 40ˆ for the product with taping. NR10050 Type : 0 ʙ40ˆ for the product with taping. 7. Temperature characteristic BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type BRL2012, BRC2016, BRL2518, BRL3225, BRC2518, BRFL2518 Inductance chang e : Within ʶ15% BRC1608 Inductance chang e : Within ʶ20% NR30/40/50/60/80, NRV30 , N RG40, NRH24/30, NRS50 / 60 Type Inductance change : Within ʶ20% NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : Meas u rement of indu c tance shall be taken at temperature range within ʵ 25ˆʙʴ85ˆ. With reference to inductance value at ʴ 20ˆ., chang e rate shall be calculated. Change of maximum inductance deviation in step 1 to 5 Temperature at step 1 20 ˆ Temperature at step 2 Minimum operating temperature Temperature at step 3 20 ˆ (Standard temperature) Temperature at step 4 Maximum oparating temperature Temperature at step 5 20 ˆ

wound0407_reli-RP2wound0407_reli_e-01 ˙ RELIABILITY DATA ˎ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 12. Adhesion of terminal electrode BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Shall not come off PC board.NR30/40/50/60/80, NRV30, N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRL201 2, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/4 0/50/60/80, NRV30, N RG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow. ɾApplie d force : 10N to X a n d Y directions. ɾDuration : 5s. ɾSol der cream thickness : 0.15mm. 10N, 5s BRC1608, NR10050 Type : ɾApplied force : 5N to X and Y directions. ɾDurati on : 5s. 8. Resistance to flexure of substrate BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type No damage.NR30/40/50/60/80, NRV30 , N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/4 0/50/60/80, NRV30, N RG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board reache s to 2 mm. Test b o ard size : 100 ʷ40ʷ1.0 T e st board material : glass epoxy-resin Sold e r cream th ickness : 0.12 (BR Series) 0.10 (NR30 / 40, NRV30, NRH24/30,NRG40) 0.15 (NR50 / 60/80, NRS50/60) Force Rod Board Test Sample 2010 R230 45ʶ2mm 45 ʶ2mm Land dimensionʢBRC1608ʣ 0.55 0.550.8 0.9 Land dimensionʢBRL2012ʣ 0.65 0.650.9 1.4 Land dimensionʢBRL3225ʣ 1.0 1.0 1.6 2.7 Land dimensionʢNR30, NRH30, NRV30ʣ 0.8 0.8 1.4 2.7 Land dimensionʢNR60, NRS60ʣ 1.6 1.6 3.1 5.7 Land dimensionʢNR, NRS50ʣ 1.5 1.5 2.1 4.0 0.7 0.7 0.8 1.8 Land dimensionʢ̧̗ ̘2016ʣ Land dimensionʢBRL2518,BRC2518,BRFL2518ʣ 0.65 0.65 1.5 1.95 Land dimensionʢNRH24ʣ 0.7 0.70.75 2.0 Land dimensionʢNR40, NRG40ʣ 1.2 1.2 1.6 3.7 Land dimensionʢNR80ʣ 1.8 1.8 3.8 7.5 Printed board thickness : 1.0mm Unit : mm 9. Insulation resistance : between wires BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50 /

60 Type

1. Insulation resistance : between wire and core BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50 /
2. Withstanding voltage : between wires and core BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50 /
3. Resistance to vibration BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Inductance change : Within ʶ 10% No significant abnormality in appearance.NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The te s t samples shall be soldered to the test board by the reflow. Then i t s hall be submitted to below test conditions. Frequency Range 10 ʙ55Hz Total Amplitude 1.5mm (May not exceed acceleration 196m/s Sweeping Method 10Hz to 55Hz to 10Hz for 1min. Time X For 2 hours on each X, Y, and Z axis.Y Z Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs.

wound0407_reli-RP3 wound0407_reli_e-01 ˙ RELIABILITY DATA ˎ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 15. Resistance to soldering heat BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Inductance change : Within ʶ 10% No significant abnormality in appearance.NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : 3 time s o f reflow oven at 230ˆ MIN. fo r 40sec. with peak temperature at 260 ʴ0 ʔ5 ˆ for 5sec. NR30/40/50/60/80, NRV30 , N RG40, NRH24/30, NRS50/60 Type, NR10050 Type : The test sample shall be exposed to reflow oven at 230 ʶ5ˆ for 40 se conds, with peak temperature at 260 ʶ5ˆ for 5 seconds, 2 times. NR6020 Type : The te s t sample shall be exposed to reflow oven at 230 ʶ5ˆ for 40 se conds, with peak temperature at 250 ʴ0 ʔ5 ˆ for 5 seconds, 2 times. Test board thickness : 1.0mm Test boa rd material : glass epoxy-resin 16. Thermal shock BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Inductance change : Within ʶ 10% No significant abnormality in appearance.NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The te s t samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown in below t able in sequence. The temperature cycle shall be repeated 100 cycles. Conditions of 1 cycle Step Temperature ( ˆ) Duration (min) 1 ʔ40ʶ3 30ʶ3

2 Room temperature Within 3

3 ʴ85ʶ2 30ʶ3

4 Room temperature Within 3

1. Damp heat BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Inductance change : Within ʶ 10% No significant abnormality in appearance.NR30/4 0/50/60/80, NRV30, N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature 60 ʶ2ˆ Humidity 90 ʙ95%RH Time 1000 hours. Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR30/4 0/50/60/80, NRV30, N RG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow. The te s t samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table. Temperature 60 ʶ2ˆ Humidity 90 ʙ95%RH Time 500 ʶ24hour 14. Solderability BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type At least 90ˋ of surface of terminal electrode is covered by new solder.NR30/40/50/60/80, NRV30, N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050Type : The te s t samples shall be dipped in flux, and then immersed in molten solder as shown in below table. Flux : Methanol solution containing rosin 25%. NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50/60 Type : Solder Temperature 245 ʶ5ˆ Time 5ʶ1.0 sec. BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Solder Temperature 245 ʶ5ˆ Time 5ʶ0.5 sec. ˞Immersion depth : All sides of mounting terminal shall be immersed.

wound0407_reli-RP4wound0407_reli_e-01 ˙ RELIABILITY DATA ˎ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 20. High temperature life test BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Inductance change : Within ʶ 10% No significant abnormality in appearance. NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type Induct ance chang e : Within ʶ10% No significant abnormality in appearance. ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature 85ʶ2ˆ Duration 1000hours Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR1005

0 Type :

Temperature 105 ʶ3ˆ Time 500ʶ24hour Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. 21. Loading at high temperature life test BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50 / Inductance chang e : Within ʶ10% No significant abnormality in appearance. NR1005

0 Type

ʲTest Met hod and Remarks ʳ NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow soldering. Temperature 85ʶ2ˆ Applied current Rated current Time 500ʶ24hour 22. Standard condition BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Standard test condition : Unless otherwise specified, temperature is 20 ʶ15ˋ and 65ʶ2 0ˋof relative humidity. When there are question concerning measurement result : In order to provide correlation date, the test shall be condition of 20 ʶ2ˆ of tempe rature, 65ʶ5% relat ive humidity. Inductance is in acc o rdance with our measured value. NR30/40/50/60/80, NRV30, N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type 19. Low temperature life test BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Inductance change : Within ʶ 10% No significant abnormality in appearance.NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature ʔ40ʶ2ˆ Duration 1000hours Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50/60 Type , NR10050 Type : The t est samples shall be soldered to the test board by the reflow. Afte r t hat, the test samples shall be placed at test conditions as shown in below table. Temperature ʵ40ʶ3ˆ Time 500ʶ24hour 18. Loading under damp heat BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL251 8, BRL3225 Type Inductance change : Within ʶ 10% No significant abnormality in appearance.NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50 / 60 Type NR10050 Type ʲTest Met hod and Remarks ʳ BRC160 8, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature 60 ʶ2ˆ Humidity 90 ʙ95ˋRH Applied current Rated current Time 1000hours. Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR30/4 0/50/60/80, NRV30 , N RG40, NRH24/30, NRS50/60 Type , NR10050 Type : The te st samples shall be soldered to the test board by the reflow. The te s t samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current continuously as shown in below table. Temperature 60 ʶ2ˆ Humidity 90 ʙ95ˋRH Applied current Rated current Time 500ʶ2hour

wound0407_reli-RP5 wound0407_reli_e-01 ˙ PRECAUTIONS ˎ This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1. Circuit Design Precautions ˗Operating enviro nment 1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, measur ing equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high reliab ility (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where produc t failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2. PCB Design Precautions ˗Land pattern design 1. Pl e ase refer to a recommended land pattern. Techni cal consid er- ations ˗Land pattern design Surf a ce Mounting ɾ Mount ing and sol d ering conditions should be checked beforehand. ɾ Applicable solde r ing process to this products is reflow soldering only. 3. Considerations for automatic placement Precautions ˗Adjustment of moun t ing machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mo u nting and soldering conditions should be checked beforehand. Techni cal consid er- ations ˗Adjustment of mount ing machine 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. 4. Soldering Precautions ˗Reflow soldering 1. Pl e ase contact any of our offices for a reflow soldering, and refer to the recommended condition specified. 2. Th i s products is reflow soldering only. 3. Pl e ase do not add any stress to a product until it returns in normal temperature after reflow soldering. ˗Lead fre e soldering 1. Wh e n using products with lead free soldering, we request to use them after confirming of adhesion, temperature of resistance to soldering heat, soldering etc suffici ently. ˗Recommended condit ions for using a soldering iron (NR10050 Type) ɾ Put the soldering iron on the land-pattern. ɾ Solde ring iron's t emperature - Below 350 ˆ ɾ Duration - 3 secon d s or less ɾ The soldering iron should not directly touch the inductor. Techni cal consid er- ations ˗Reflow soldering 1. If p roducts are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the prod ucts. ɾBRC160 8, BRL201 2, BRL2518, ɾNR30/40/50/60/80, NRV30, NRG40, ɾNR10050 Type BRC2016, BRL32 2 5 Type BRC2518, BRFL2518 NRH24/30, NRS50/60 Type Recommended reflow c o ndition (Pb free solder) Recommended reflow condition (Pb free solder) Recommended reflow condition (Pb free solder) Temperatureʦˆʧ 300 200 100 90ʶ30sec 150ʙ180 30ʶ10sec 230ˆ min 5sec max Peakɿ 260ʴ0/ʔ5ˆ ̝eating Timeʲsecʳ 5sec max Temperatureʦˆʧ 300 200 100 90ʶ30sec 150ʙ180 30ʶ10sec 230ˆ min Peakɿ 250ʴ5/ʔ0ˆ ̝eating Timeʲsecʳ 5sec max Temperatureʦˆʧ ̝eating Timeʲsecʳ 300 200 100 90ʶ30sec 150ʙ180 30ʶ10sec 230ˆ min Peakɿ 250ʴ0/ʔ5ˆ 5. Cleaning Precautions ˗Cleaning condi t ions 1. Washing by supersonic waves shall be avoided. Techni cal consid er- ations ˗Cleaning condit ions 1. If washing by supersonic waves, supersonic waves may cause broken products. 6. Handling Precautions ˗Handling 1. Keep the product away from all magnets and magnetic objects. ˗Breaka way PC board s (splitting along perforations) 1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board. 2. Bo a rd separation should not be done manually, but by using the appropriate devices. ˗Mechan ical consi d erations 1. Please do not give the product any excessive mechanical shocks. 2. Pl e ase do not add any shock and power to a product in transportation. ˗Pick-u p pressure 1. Pl e ase do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part. ɻ ˗Packin g 1. Please avoid accumulation of a packing box as much as possible. Techni cal consid er- ations ˗Breakaway PC board s (splitting along perforations) 1. Planning pattern configurations and the position of products should be carefully performed to minimize stress. ˗Mechan ical consi d erations 1. There is a case to be damaged by a mechanical shock. 2. Th e re is a case to be broken by the handling in transportation. ˗Pick-u p pressure 1. Da m age and a characteristic can vary with an excessive shock or stress. ˗Packin g 1. There is a case that transformation and a product of tape are damaged by accumulation of a packing box. 7. Storage conditions Precautions ˗Storage 1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be contr olled. ɾ Reco mmended condit ions Ambient tempe r ature : 0ʙ40ˆ Humidity : Below 7 0% RH The ambient temperature must be kept below 30 ˆ. Even u nder ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used within 6 months from the time of delivery. In ca s e of storage over 6 months, solderability shall be checked before actual usage. Techni cal consid er- ations ˗Storage 1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping /packaging materials may take place. SMD Indu ctors