LBC2016-T680MK | DigiCamel IC Datasheet

Online Datasheet

Read LBC2016-T680MK online.

LB-1608-T4R7MK KEMET | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 32

Technical content

Small size wound chip inductor with low DC resistance • -25ºC to +105ºC (including self-generated heat)
Dimension without directional influence on mountability and characteristics
Excellent Q and SRF (LB H1608 Series) Applications:
Digital Still Cameras (DSC), Digital Video Cameras (DVC), PDA’s and other portable digital equipment
Portable telephones and wireless LAN (LB H1608 Series) KEMET Designator Inductance Examples: 3N9 = 0.0039μH 10N = 0.01μH R10 = 0.1μH 1R0 = 1.0μH 100 = 10μH 101 = 100μH Inductance Tolerance K = ±10%, M = ±20% Type LB- =Standard Type LBC = High Current Type LBR = Low Rdc Type LBMF = Bottom Surface Electrode (See Part Number Table) Packaging Code T = Tape & Reel LB- - (-) Required to complete Part Number

2012 T 101 M K

E T WL Wire Wound Chip Inductors - LB Series Part Numbering Table Dimension Table in millimeters (inches) Case Size 1608 (0603) 2012 (0805) 2016 (0806) 2518 (1007) 3218 (1207) Dim. Code EIA Case Size L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 1608 0603 1.6 ±0.1 (0.063 ±0.004) 0.8 ±0.1 (0.031 ±0.004) 0.8 ±0.1 (0.031 ±0.004) 0.35 ±0.2 (0.014 ±0.008) 2012 0805 2.0 ±0.2 (0.079 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 2016 0806 2.0 ±0.2 (0.079 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 2518 1007 2.5 ±0.2 (0.098 ±0.008) 1.8 ±0.2 (0.072 ±0.008) 1.8 ±0.2 (0.072 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 3218 1207 3.2 ±0.2 (0.128 ±0.008) 1.8 ±0.2 (0.072 ±0.008) 1.8 ±0.2 (0.072 ±0.008) 0.6 ±0.2 (0.024 ±0.008)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 5 Ordering Code Inductance (μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LB-1608-T4R7MK 4.7 ±20% 45 0.55 70 7.96 4,000 LB-1608-T8R2MK 8.2 ±20% 32 0.70 50 2.52 4,000 LB-1608-T100MK 10 ±20% 32 0.70 50 2.52 4,000

0603 Case Size Standard Type (LB 1608 Series)

Ordering Code Inductance (μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LB-2012-T1R0MK 1.0 ±20% 100 0.15 300 7.96 3,000 LB-2012-T2R2MK 2.2 ±20% 80 0.23 240 7.96 3,000 LB-2012-T4R7MK 4.7 ±20% 45 0.40 140 7.96 3,000 LB-2012-T100MK 10 ±20% 32 0.70 100 2.52 3,000 LB-2012T100MRK* 10 ±20% 32 0.50 100 2.52 3,000 LB-2012-T220MK 22 ±20% 15 1.70 75 2.52 3,000 LB-2012-T470MK 47 ±20% 11 3.70 50 2.52 3,000 LB-2012-T101MK 100 ±20% 8 7.00 30 0.796 3,000

0805 Case Size Standard Type (LB 2012 Series)

Low Rdc Type

0806 Case Size Standard Type (LB 2016 Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LB-2016-T1R0MK 1.0 ±20% 100 0.09 455 7.96 2,000 LB-2016-T1R5MK 1.5 ±20% 80 0.11 350 7.96 2,000 LB-2016-T2R2MK 2.2 ±20% 70 0.13 315 7.96 2,000 LB-2016-T3R3MK 3.3 ±20% 55 0.20 280 7.96 2,000 LB-2016-T4R7MK 4.7 ±20% 45 0.25 210 7.96 2,000 LB-2016-T6R8MK 6.8 ±20% 38 0.35 175 7.96 2,000 LB-2016-T100MK 10 ±20% 32 0.50 155 2.52 2,000 LB-2016-T150MK 15 ±20% 28 0.70 130 2.52 2,000 LB-2016-T220MK 22 ±20% 16 1.00 105 2.52 2,000 LB-2016-T330MK 33 ±20% 14 1.70 85 2.52 2,000 LB-2016-T470MK 47 ±20% 11 2.40 60 2.52 2,000 LB-2016-T680MK 68 ±20% 10 3.00 50 2.52 2,000 LB-2016-T101MK 100 ±20% 8 4.50 40 0.796 2,000

1007 Case Size Standard Type (LB 2518 Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LB-2518-T1R0MK 1.0 ±20% 100 0.06 500 7.96 2,000 LB-2518-T1R5MK 1.5 ±20% 80 0.07 400 7.96 2,000 LB-2518-T2R2MK 2.2 ±20% 68 0.09 340 7.96 2,000 LB-2518-T3R3MK 3.3 ±20% 54 0.11 270 7.96 2,000 LB-2518-T4R7MK 4.7 ±20% 46 0.13 240 7.96 2,000 LB-2518-T6R8MK 6.8 ±20% 38 0.15 195 7.96 2,000 LB-2518-T100MK 10 ±20% 30 0.25 165 2.52 2,000 LB-2518-T150MK 15 ±20% 23 0.32 145 2.52 2,000 LB-2518-T220MK 22 ±20% 19 0.50 115 2.52 2,000 LB-2518-T330MK 33 ±20% 15 0.70 95 2.52 2,000 LB-2518-T470MK 47 ±20% 12 0.95 85 2.52 2,000 LB-2518-T680MK 68 ±20% 9.5 1.50 70 2.52 2,000 LB-2518-T101MK 100 ±20% 9 2.10 55 0.796 2,000 LB-2518-T151MK 150 ±20% 7 3.20 45 0.796 2,000 LB-2518-T221MK 220 ±20% 5.5 4.50 35 0.796 2,000 LB-2518-T331MK 330 ±20% 4.5 7.00 30 0.796 2,000 LB-2518-T471MK 470 ±20% 3.5 10.00 25 0.796 2,000 LB-2518-T681MK 680 ±20% 3 17.00 20 0.796 2,000 LB-2518-T102MK 1000 ±20% 2.4 24.00 15 0.252 2,000

1207 Case Size Standard Type (LB 3218 Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LB-3218-T1R0MK 1.0 ±20% 100 0.06 1075 7.96 2,000 LB-3218-T1R5MK 1.5 ±20% 80 0.07 860 7.96 2,000 LB-3218-T2R2MK 2.2 ±20% 68 0.09 775 7.96 2,000 LB-3218-T3R3MK 3.3 ±20% 54 0.11 560 7.96 2,000 LB-3218-T4R7MK 4.7 ±20% 41 0.13 550 7.96 2,000 LB-3218-T6R8MK 6.8 ±20% 40 0.17 380 7.96 2,000 LB-3218-T100(_)K 10 K=10%, M=±20% 30 0.25 340 2.52 2,000 LB-3218-T150(_)K 15 K=10%, M=±20% 25 0.32 300 2.52 2,000 LB-3218-T220(_)K 22 K=10%, M=±20% 19 0.49 255 2.52 2,000 LB-3218-T330(_)K 33 K=10%, M=±20% 15 0.75 215 2.52 2,000 LB-3218-T470(_)K 47 K=10%, M=±20% 12 0.92 205 2.52 2,000 LB-3218-T680(_)K 68 K=10%, M=±20% 11 1.49 145 2.52 2,000 LB-3218-T101(_)K 100 K=10%, M=±20% 8 2.40 140 0.796 2,000 LB-3218-T151(_)K 150 K=10%, M=±20% 7 3.20 105 0.796 2,000 LB-3218-T221(_)K 220 K=10%, M=±20% 5 5.40 80 0.796 2,000 LB-3218-T331(_)K 330 K=10%, M=±20% 4 7.00 65 0.796 2,000 LB-3218-T681(_)K 680 K=10%, M=±20% 3 17.00 45 0.796 2,000 LB-3218-T102(_)K 1000 K=10%, M=±20% 2.4 27.00 39 0.252 2,000 © KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-63006

0806 Case Size High Current Type (LB C2016 Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LBC2016-T1R0MK 1.0 ±20% 100 0.10 690 7.96 2,000 LBC2016-T1R5MK 1.5 ±20% 80 0.15 600 7.96 2,000 LBC2016-T2R2MK 2.2 ±20% 70 0.20 520 7.96 2,000 LBC2016-T3R3MK 3.3 ±20% 55 0.27 410 7.96 2,000 LBC2016-T4R7MK 4.7 ±20% 45 0.37 355 7.96 2,000 LBC2016-T6R8MK 6.8 ±20% 38 0.59 290 7.96 2,000 LBC2016-T100MK 10 ±20% 32 0.82 245 2.52 2,000 LBC2016-T150MK 15 ±20% 28 1.20 200 2.52 2,000 LBC2016-T220MK 22 ±20% 16 1.80 165 2.52 2,000 LBC2016-T330MK 33 ±20% 14 2.80 135 2.52 2,000 LBC2016-T470MK 47 ±20% 11 4.30 110 2.52 2,000 LBC2016-T680MK 68 ±20% 10 7.00 95 2.52 2,000 LBC2016-T101MK 100 ±20% 8 8.00 75 0.796 2,000 Ordering Code Inductance (μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LBMF1608T1R0MK 1.0 ±20% 100 0.19 620 7.96 3,000 LBMF1608T2R2MK 2.2 ±20% 70 0.33 430 7.96 3,000 LBMF1608T4R7MK 4.7 ±20% 45 0.50 295 7.96 3,000 LBMF1608T100(_)K 10 K=10%, M=±20% 40 1.20 200 2.52 3,000 LBMF1608T220(_)K 22 K=10%, M=±20% 16 3.70 130 2.52 3,000 LBMF1608T470(_)K 47 K=10%, M=±20% 11 5.80 90 2.52 3,000

0603 Case Size Standard Type (LB MF 1608 Series)

(_) - Insert Inductance Tolerance Code (K or M) (_) - Insert Inductance Tolerance Code (K or M) Ordering Code Inductance (μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LBC2012-T1R0MK 1.0 ±20% 100 0.19 620 7.96 3,000 LBC2012-T2R2MK 2.2 ±20% 70 0.33 430 7.96 3,000 LBC2012-T4R7MK 4.7 ±20% 45 0.50 295 7.96 3,000 LBC2012-T100MK 10 ±20% 40 1.20 200 2.52 3,000 LBC2012-T220MK 22 ±20% 16 3.70 130 2.52 3,000 LBC2012-T470MK 47 ±20% 11 5.80 90 2.52 3,000

0805 Case Size High Current Type (LB C2012 Series)

1007 Case Size High Current Type (LB C2518 Series)

1007 Case Size Low RDC Type (LB R2518 Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LBC2518-T1R0MK 1.0 ±20% 100 0.08 775 7.96 2,000 LBC2518-T1R5MK 1.5 ±20% 80 0.11 660 7.96 2,000 LBC2518-T2R2MK 2.2 ±20% 68 0.13 600 7.96 2,000 LBC2518-T3R3MK 3.3 ±20% 54 0.16 500 7.96 2,000 LBC2518-T4R7MK 4.7 ±20% 41 0.20 430 7.96 2,000 LBC2518-T6R8MK 6.8 ±20% 38 0.30 360 7.96 2,000 LBC2518-T100MK 10 ±20% 30 0.36 300 2.52 2,000 LBC2518-T150MK 15 ±20% 23 0.65 250 2.52 2,000 LBC2518-T220MK 22 ±20% 19 0.77 210 2.52 2,000 LBC2518-T330MK 33 ±20% 15 1.50 170 2.52 2,000 LBC2518-T470MK 47 ±20% 12 1.90 150 2.52 2,000 LBC2518-T680MK 68 ±20% 9.5 2.80 120 2.52 2,000 LBC2518-T101MK 100 ±20% 9.0 3.70 100 0.796 2,000 LBC25I8-T151MK 150 ±20% 7.0 6.10 85 0.796 2,000 LBC2518-T221MK 220 ±20% 5.5 8.40 70 0.796 2,000 LBC2518-T331MK 330 ±20% 4.5 12.30 60 0.796 2,000 LBC2518-T471MK 470 ±20% 3.5 22.00 45 0.796 2,000 LBC2518-T681MK 680 ±20% 3.0 28.00 35 0.796 2,000 Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LBR2518-T1R0MK 1.0 ±20% 100 0.045 400 7.96 2,000 LBR25I8-T2R2MK 2.2 ±20% 68 0.07 280 7.96 2,000 LBR2518-T4R7MK 4.7 ±20% 45 0.1 200 7.96 2,000 LBR2518-T100MK 10 ±20% 30 0.19 180 2.52 2,000 LBR2518-T220MK 22 ±20% 19 0.44 120 2.52 2,000 LBR2518-T470MK 47 ±20% 11 0.84 95 2.52 2,000 LBR2518-T101MK 100 ±20% 9 1.89 75 0.796 2,000

0805 Case Size Low RDC Type (LB R2012 Series)

Ordering Code Inductance ( μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity LBR2012-T1R0MK 1.0 ±20% 100 0.07 200 7.96 3,000 LBR2012-T2R2MK 2.2 ±20% 80 0.13 175 7.96 3,000 LBR20I2-T4R7MK 4.7 ±20% 45 0.24 150 7.96 3,000 LBR2012-T100MK 10 ±20%. 32 0.36 125 2.52 3,000 LBR2012-T220MK 22 ±20% 16 1.00 100 2.52 3,000 LBR2012-T470MK 47 ±20% I 1 1.70 75 2.52 3,000 LBR2012-T101MK 100 ±20% 8 4.00 50 0.796 3,000

Small size wound chip inductor with high current • -25ºC to +105ºC (including self-generated heat)
Dimension without directional influence on mountability and characteristics Applications:
Digital Still Cameras (DSC), Digital Video Cameras (DVC), PDA’s and other portable digital equipment
For DC-DC converter circuit KEMET Designator Inductance Examples: 3N9 = 0.0039μH 10N = 0.01μH R10 = 0.1μH 1R0 = 1.0μH 100 = 10μH 101 = 100μH Inductance Tolerance “-” = Standard, M = ±20% Type CB- = Standard Type CBC = High Current Type CBL = High Frequency Type CBMF = Power, Bottom surface electrode (See part number table) Case Size 2012 (0805) 2016 (0806) 2518 (1007) 3225 (1210) Packaging Code T = Tape & Reel CB- Special Code R = Low Rdc Type

2016 T 100 M R K

Dim. Code EIA Case Size L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 1608 0603 1.6 ±0.2 (0.063 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.4 ±0.15 (0.015 ±0.006) 2012 0805 2.0 ±0.2 (0.079 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 2016 0806 2.0 ±0.2 (0.079 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 2518 1007 2.5 ±0.2 (0.098 ±0.008) 1.8 ±0.2 (0.071 ±0.008) 1.8 ±0.2 (0.071 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 3225 1210 3.2 ±0.2 (0.126 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 0.6 ±0.3 (0.024 ±0.012) E T W L Wire Wound Chip Inductors - CB Series Part Numbering Table Dimension Table in millimeters (inches)

0805 Case Size Low RDC Type (CB 2012 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 CB-2012T2R2MRK 2.2 ±20% 80 0.23 410 770 7.96 3,000 CB-2012T4R7MRK 4.7 ±20% 45 0.40 300 580 7.96 3,000 CB-2012T100MRK 10 ±20% 32 0.50 200 520 2.52 3,000 CB-2012T220MRK 22 ±20% 16 1.70 135 280 2.52 3,000 CB-2012T470MRK 47 ±20% 11 3.70 90 190 2.52 3,000

0805 Case Size High Current Type (CBC 2012 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 CBC2012T1R0M-K 1.0 ±20% 100 0.19 700 840 7.96 3,000 CBC2012T2R2M-K 2.2 ±20% 70 0.33 530 640 7.96 3,000 CBC2012T4R7M-K 4.7 ±20% 45 0.50 360 520 7.96 3,000 CBC2012T100M-K 10 ±20% 40 1.20 240 340 2.52 3,000 CBC2012T220M-K 22 ±20% 16 3.70 170 190 2.52 3,000 CBC2012T470M-K 47 ±20% 11 5.80 120 150 2.52 3,000

0806 Case Size High Current Type (CBC 2016 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 CBC2016T1R0M-K 1.0 ±20% 100 0.1 1100 1100 7.96 3,000 CBC2016T1R5M-K 1.5 ±20% 80 0.15 1000 1000 7.96 3,000 CBC2016T2R2M-K 2.2 ±20% 70 0.20 750 720 7.96 3,000 CBC2016T3R3M-K 3.3 ±20% 55 0.27 600 610 7.96 3,000 CBC2016T4R7M-K 4.7 ±20% 45 0.37 550 530 7.96 3,000 CBC2016T6R8M-K 6.8 ±20% 38 0.59 450 450 7.96 3,000 CBC2016T100(_)-K 10 K=10%, M=20% 32 0.82 380 350 2.52 3,000 CBC2016T150(_)-K 15 K=10%, M=20% 28 1.2 300 300 2.52 3,000 CBC2016T220(_)-K 22 K=10%, M=20% 16 1.8 250 240 2.52 3,000 CBC2016T330(_)-K 33 K=10%, M=20% 14 2.8 220 220 2.52 3,000 CBC2016T470(_)-K 47 K=10%, M=20% 11 4.3 150 150 2.52 3,000 CBC2016T680(_)-K 68 K=10%, M=20% 10 7 130 130 2.52 3,000 CBC2016T101(_)-K 100 K=10%, M=20% 8 8 110 110 0.796 3,000

0806 Case Size Low RDC Type (CB 2016 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 CB-2016T2R2M-K 2.2 ±20% 70 0.13 510 1000 7.96 2,000 CB-2016T4R7M-K 4.7 ±20% 45 0.25 340 740 7.96 2,000 CB-2016T100M-K 10 ±20% 32 0.50 250 520 2.52 2,000 CB-2016T220M-K 22 ±20% 16 1.00 165 370 2.52 2,000 CB-2016T470M-K 47 ±20% 11 2.40 110 240 2.52 2,000 *For rated current of ordinary small power choke coils, please refer to the rated current (1) in the above table. *For current (2) is the current for instantaneous flow such as plunging current of DC/DC converter. In case of usage in the circuit where large current may be semicontinuously applied over 5 minutes with auto recovery circuit, etc, please contact our sales section before practical application. Rated current (1):Current value to guarantee -30% of nominal inductance Rated current (2):Current value to guarantee component temperature within AT = 40°C with current flow. (It's not the current to guarantee the inductance value) (_) - Insert Inductance Tolerance Code (K or M)

1007 Case Size Low RDC Type (CB 2518 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 CB-2518T2R2M-K 2.2 ±20% 68 0.09 510 1300 7.96 2,000 CB-2518T4R7M-K 4.7 ±20% 46 0.13 340 1100 7.96 2,000 CB-2518T100M-K 10 ±20% 30 0.25 250 820 2.52 2,000 CB-2518T220M-K 22 ±20% 19 0.50 165 580 2.52 2,000 CB-2518T470M-K 47 ±20% 12 0.95 110 420 2.52 2,000

1007 Case Size High Current Type (CBC 2518 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 CBC2518T1R0M-K 1.0 ±20% 100 0.08 1000 1200 7.96 2,000 CBC2518T2R2M-K 2.2 ±20% 68 0.13 890 1100 7.96 2,000 CBC2518T4R7M-K 4.7 ±20% 41 0.20 680 920 7.96 2,000 CBC2518T100M-K 10 ±20% 30 0.36 480 680 2.52 2,000 CBC2518T220M-K 22 ±20% 19 0.77 320 460 2.52 2,000 CBC2518T470M-K 47 ±20% 12 1.90 240 290 2.52 2,000 CBC2518T101M-K 100 ±20% 9 3.7 160 170 0.796 2,000 CBC2518T221M-K 220 ±20% 5.5 8.4 115 110 0.796 2,000 CBC2518T471M-K 470 ±20% 3.5 22 80 70 0.796 2,000 CBC2518T681M-K 680 ±20% 3 28 65 60 0.796 2,000

1210 Case Size High Current Type (CBC 3225 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity CBC3225T1R0MRK 1.0 ±20% 250 0.055 2000 1440 0.1 1,000 CBC3225T1R5MRK 1.5 ±20% 220 0.06 2000 1310 0.1 1,000 CBC3225T2R2MRK 2.2 ±20% 190 0.08 2000 1130 0.1 1,000 CBC3225T3R3MRK 3.3 ±20% 160 0.095 1800 1040 0.1 1,000 CBC3225T4R7MRK 4.7 ±20% 70 0.1 1250 1010 0.1 1,000 CBC3225T6R8MRK 6.8 ±20% 50 0.12 930 940 0.1 1,000 CBC3225T100(_)RK 10 K=±10%, M=±20% 23 0.133 900 900 0.1 1,000 CBC3225T150(_)RK 15 K=±10%, M=±20% 20 0.195 730 850 0.1 1,000 CBC3225T220(_)RK 22 K=±10%, M=±20% 17 0.27 620 780 0.1 1,000 CBC3225T330(_)RK 33 K=±10%, M=±20% 13 0.41 500 570 0.1 1,000 CBC3225T470(_)RK 47 K=±10%, M=±20% 10 0.67 390 480 0.1 1,000 CBC3225T680(_)RK 68 K=±10%, M=±20% 8 1 320 410 0.1 1,000 CBC3225T101(_)RK 100 K=±10%, M=±20% 6 1.4 270 340 0.1 1,000 (_) - Insert Inductance Tolerance Code (K or M) *For rated current of ordinary small power choke coils, please refer to the rated current (1) in the above table. *For current (2) is the current for instantaneous flow such as plunging current of DC/DC converter. In case of usage in the circuit where large current may be semicontinuously applied over 5 minutes with auto recovery circuit, etc, please contact our sales section before practical application. Rated current (1):Current value to guarantee -30% of nominal inductance (at 20ºC) Rated current (2):Current value to guarantee component temperature within AT = 40°C with current flow. (It's not the current to guarantee the inductance value) (_) - Insert Inductance Tolerance Code (K or M)

0603 Case Size Power, Bottom Surface Electrode Type (CBMF 1608 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 CBMF1608T1R0MK 1.0 ±20% 100 0.09 290 770 7.96 2,000 CBMF1608T2R2MK 2.2 ±20% 80 0.17 190 560 7.96 2,000 CBMF1608T4R7MK 4.7 ±20% 45 0.24 145 470 7.96 2,000 CBMF1608T100(_)K 10.0 K = 10%, M = 20% 32 0.36 115 380 2.52 2,000 CBMF1608T220(_)K 22 K = 10%, M = 20% 16 1.00 70 230 2.52 2,000 CBMF1608T470(_)K 47 K = 10%, M = 20% 11 2.5 50 140 2.52 2,000

0805 Case Size Low Profile Type (CBL 2012 Series)

(μH) Inductance Tolerance Minimum Self Resonant Frequency (MHz) DC Resistance (ΩΩ) (±30%) Maximum Rated Current (mA) Measuring Frequency (MHz) Tape & Reel Packaging Quantity12 CBL2012T4R7M-K 4.7 ±20% 45 0.66 275 490 0.10 4,000 CBL2012T100M-K 10 ±20% 32 1.00 205 370 0.10 4,000 CBL2012T470M-K 47 ±20% 11 4.20 100 140 0.10 4,000

Multilayer inductor made of advanced ceramics with low • 0603: -55ºC to +125ºC resistivity silver used as internal conductors, provides • 1005: -55ºC to +125ºC* excellent Q and SRF characteristics -55ºC to +85ºC*
Multilayer block structure ensures outstanding reliability, • 1608: -40ºC to +85ºC high productivity and excellent product quality • 2125: -40ºC to +85ºC Applications: * Depends on rated current.
Designd to address surface mount inductor needs for applications above 100MHz
Mobile phones and pagers
High frequency circuits
EMI counter measures in high frequency circuits KEMET Designator Inductance Examples: 3N9 = 3.9nH 10N = 10.0nH R10 = 100nH R12 = 120nH Inductance Tolerance C = ±0.2nH H = ±3% J = ±5% S = ±0.3nH Type HK- = High Frequency HKQ = High Frequency with High Q Case Size 0603 (0201) 1005 (0402) 1608 (0603) 2125 (0805) Packaging Code T = Tape & Reel HK- 1005 10N J T-K Dim. Code EIA Case Size L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 0603 0201 0.6 ±0.03 (0.024 ±0.001) 0.3 ±0.03 (0.012 ±0.001) 0.3 ±0.03 (0.012 ±0.001) 0.15 ±0.05 (0.006 ±0.002) 1005 0402 1.0 ±0.05 (0.039 ±0.002) 0.5 ±0.05 (0.02 ±0.002) 0.5 ±0.05 (0.02 ±0.002) 0.25 ±0.10 (0.01 ±0.004) 1608 0603 1.6 ±0.15 (0.063 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.3 ±0.2 (0.012 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 1.0 +0.2/-0.3 (0.033 ±0.008) 0.5 ±0.3 (0.020 ±0.012) E T WL Multilayer Chip Inductors for High Frequency - HK Series Part Numbering Table Dimension Table in millimeters (inches) (-) Required to complete Part Number

0201 Case Size Multilayer Chip Inductors for High Frequency (HK 0603 Series)

(nH) Inductance Tolerance Q min. Measuring Frequency (MHz) Typical Q Self-resonant Frequency (MHz) DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Frequency (MHz) 100 300 500 800 1000 min. typ. max. typ.

0402 Case Size Multilayer Chip Inductors for High Frequency (HK 1005 Series)

(nH) Inductance Tolerance Q min. Measuring Frequency (MHz) Typical Q Self-resonant Frequency (MHz) DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Frequency (MHz) 100 300 500 800 1000 min. typ. max. tvp. -55° to 125°C -55° to 85°C

0603 Case Size Multilayer Chip Inductors for High Frequency (HK 1608 Series)

(nH) Inductance Tolerance Q min. Measuring Frequency (MHz) Typical Q Self-resonant Frequency (MHz) DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Frequency (MHz) 100 300 500 800 1000 min. typ max. typ.

0805 Case Size Multilayer Chip Inductors for High Frequency (HK 2125 Series)

(nH) Inductance Tolerance Q min. Measuring Frequency (MHz) Typical Q Self-resonant Frequency (MHz) DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Frequency (MHz) 100 300 500 800 1000 min. typ. max. typ.

Internal printed coil structure creates a closed magnetic circuit • -40ºC to +85ºC which acts as a magnetic shield eliminating crosstalk, thus permitting higher mounting densities.
Multilayer block structure yields higher reliability
The smallest mH inductors in the world (LK1005 Series)
Low profile below 1mm on 1206 case size (CKP Series)
Low DC power dissipation due to Low Rdc with High Aspect Ratio internal conductor that stands on the Green Sheet and Printing technologies (CKP Series) Applications:
Any general circuit in portable equipment in which a compact size and high mounting densities are required (LK Series)
Separation of analog and digital circuits (CK Series)
Prevents interference between PLL and other digital circuits (CK Series)
DC/DC convertor for mobile equipment, cellular phones, DSC and DVC (CK Series) KEMET Designator Inductance 47N = 0.047μH R15 = 0.15μH 1R5 = 1.5μH 100 = 10μH 150 = 15μH Inductance Tolerance K = ±10%, M = ±20% Type LK- = Standard Type CKP = High Current Type for Power Supply Line CK- = Standard Type Case Size 1005 (0402) 1608 (0603) 2125 (0805) 3216 (1206) Packaging Code T = Tape & Reel LK- 1005 T1R5 K K Dim. Code EIA Case Size L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 1005 0402 1.0 ±0.05 (0.039 ±0.002) 0.50 ±0.05 (0.020 ±0.002) 0.50 ±0.05 (0.020 ±0.002) 0.25 ±0.10 (0.010 ±0.004) 1608 0603 1.6 ±0.15 (0.063 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.3 ±0.2 (0.012 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 1.25 ±0.2 (0.033 ±0.008) (0.049 ±0.008) 0.5 ±0.2 (0.02 ±0.008) 3216 1206 3.2 ±0.2 (0.126 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.8 +0.10/-0.15 0.6 ±0.3 (0.024 ±0.012) E T WL Multilayer Chip Inductors - LK/CK/CKP Series Part Numbering Table Dimension Table in millimeters (inches) (-) Required to complete Part Number

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 17 Ordering Code Inductance (μH) Inductance Tolerance Q min. Minimum Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0402 Case Size Multilayer Chip Inductors (LK 1005 Series)

(_) - Insert Inductance Tolerance Code (K or M)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630018 Ordering Code Inductance (μH) Inductance Tolerance Q min. Minimum Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0603 Case Size Multilayer Chip Inductors (LK 1608 Series)

(_) - Insert Inductance Tolerance Code (K or M)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 19 Ordering Code Inductance (μH) Inductance Tolerance Q min. Minimum Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0805 Case Size Multilayer Chip Inductors (LK 2125 Series)

(_) Insert Tolerence Code (K±10% or M±20%) listed to the right

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630020 Ordering Code Inductance (μH) Inductance Tolerance Q min. Minimum Self Resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Inductance (μH) Inductance Tolerance Minimum Inductance at 200mA (μH) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0805 Case Size Multilayer Chip Inductors (CK 2125 Series)

1206 Case Size Multilayer Chip Inductors (CKP 3216 Series)

(μH) Inductance Tolerance Minimum Inductance at 200mA (μH) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Measuring Frequency (MHz) Thickness mm (inches) Tape & Reel Packaging Quantity

0603 Case Size Multilayer Chip Inductors (CK 1608 Series)

Small and low profile inductor • For small DC/DC converter; cellular phones,
Corresponds to high current HDD, HVC, DSC, and PDA LCD display
Simple and original magnetic shield structure Operating Temperature:
Structure strong against shock-proof • -25ºC to +120ºC (including self-generated heat) KEMET Designator Inductance Examples: 2R2 = 2.2μH 100 = 10μH 101 = 100μH Inductance Tolerance M = ±20%, N = 30% Type NR- = Coating resin specification Case Size 3010, 4010, 4012, 4018, 6012, 8040 Packaging Code T = Tape & Reel NR- 4012 T M K Dim. Code L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) F 3010 3.0 ±0.1 (0.118 ±0.004) 3.0 ±0.1 (0.118 ±0.004) 1.0 max. (0.039 max.) 0.9 ±0.2 (0.035 ±0.008) 1.9 ±0.2 (0.075 ±0.008) 4010 4.0 ±0.2 (0.157 ±0.008) 4.0 ±0.2 (0.157 ±0.008) 1.0 max. (0.039 max.) 1.1 ±0.2 (0.043 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 4012 4.0 ±0.2 (0.157 ±0.008) 4.0 ±0.2 (0.157 ±0.008) 1.2 max. (0.047 max.) 1.1 ±0.2 (0.043 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 4018 4.0 ±0.2 (0.157 ±0.008) 4.0 ±0.2 (0.157 ±0.008) 1.2 max. (0.047 max.) 1.1 ±0.2 (0.043 ±0.008) 2.5 ±0.2 (0.098 ±0.008) 6012 6.0 ±0.2 (0.236 ±0.008) 6.0 ±0.2 (0.236 ±0.008) 1.2 max. (0.047 max.) 1.0 ±0.2 (0.039 ±0.008) 4.8 ±0.2 (0.189 ±0.008) 8040 8.0 ±0.2 (0.315 ±0.008) 8.0 ±0.2 (0.315 ±0.008) 4.2 max (0.165 max) 1.6 ±0.3 (0.063 ±0.012) 5.6 ±0.3 (0.220 ±0.012) Low Profile SMD Inductors (NR Series) Part Numbering Table Dimension Table in millimeters (inches) (-) Required to complete Part Number L W H E E F Dimensions 3.0mm x 3.0mm (NR3010 Type, 1.0mm Max. Height) Ordering code Inductance ( μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Heigh (mm) Tape & Reel Packaging Quantity NR-3010T1R0N-K 1.0 ±30% 100 126 0.065 1300 1.0 2,000 NR-3010T1R5N-K 1.5 ±30% 100 98 0.08 1200 1.0 2,000 NR-3010T2R2M-K 2.2 ±20% 100 82 0.095 1100 1.0 2,000 NR-3010T3R3M-K 3.3 ±20% 100 63 0.14 870 1.0 2,000 NR-3010T4R7M-K 4.7 ±20% 100 56 0.19 750 1.0 2,000 NR-3010T6R8M-K 6.8 ±20% 100 46 0.30 610 1.0 2,000 NR-3010T100M-K 10 ±20% 100 35 0.45 500 1.0 2,000 NR-3010T150M-K 15 ±20% 100 30 0.74 400 1.0 2,000 NR-3010T220M-K 22 ±20% 100 25 1.03 350 1.0 2,000 NR-3010T330M-K 33 ±20% 100 20 1.55 260 1.0 2,000 NR-3010T470M-K 47 ±20% 100 17 2.05 220 1.0 2,000 Dimensions 4.0mm x 4.0mm (NR4010 Type, 1.0mm Max. Height) Ordering code Inductance ( μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Height (mm) Tape & Reel Packaging Quantity NR-4010T1R0N-K 1.0 ±30% 100 116 0.10 1050 1.0 5,000 NR-4010T2R2M-K 2.2 ±30% 100 73 0.15 890 1.0 5,000 NR-4010T3R3M-K 3.3 ±20% 100 58 0.18 820 1.0 5,000 NR-4010T4R7M-K 4.7 ±20% 100 47 0.21 750 1.0 5,000 NR-4010T6R8M-K 6.8 ±20% 100 38 0.30 620 1.0 5,000 NR-4010T100M-K 10 ±20% 100 31 0.38 560 1.0 5,000 NR-4010T150M-K 15 ±20% 100 24 0.51 470 1.0 5,000 NR-4010T220M-K 22 ±20% 100 19 0.87 360 1.0 5,000 NR-4010T330M-K 33 ±20% 100 15 1.54 280 1.0 5,000 NR-4010T470M-K 47 ±20% 100 13 1.81 240 1.0 5,000

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630022 Dimensions 4.0mm x 4.0mm (NR4012 Type, 1.2mm Max. Height) Dimensions 4.0mm x 4.0mm (NR4018 Type, 1.8mm Max. Height) Dimensions 6.0mm x 6.0mm (NR6012 Type, 1.2mm Max. Height) Dimensions 8.0mm x 8.0mm (NR8040 Type, 4.2mm Max. Height) Ordering code Inductance ( μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Height (mm) Tape & Reel Packaging Quantity NR-4012T2R2M-K 2.2 ±20% 100 66 0.09 1200 1.2 4,500 NR-4012T3R3M-K 3.3 ±20% 100 50 0.13 980 1.2 4,500 NR-4012T4R7M-K 4.7 ±20% 100 45 0.14 960 1.2 4,500 NR-4012T6R8M-K 6.8 ±20% 100 35 0.18 840 1.2 4,500 NR-4012T100M-K 10 ±20% 100 28 0.24 740 1.2 4,500 NR-4012T150M-K 15 ±20% 100 23 0.40 560 1.2 4,500 NR-4012T-220M-K 22 ±20% 100 18 0.48 510 1.2 4,500 NR-4012T330M-K 33 ±20% 100 15 0.81 400 1.2 4,500 NR-4012T470M-K 47 ±20% 100 12 1.00 350 1.2 4,500 Ordering code Inductance ( μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Heigh (mm) Tape & Reel Packaging Quantity NR-4018T1R0N-K 1.0 ±30% 100 80 0.03 1830 1.8 3,500 NR-4018T2R2M-K 2.2 ±20% 100 52 0.06 1440 1.8 3,500 NR-4018T3R3M-K 3.3 ±20% 100 44 0.07 1230 1.8 3,500 NR-4018T4R7M-K 4.7 ±20% 100 34 0.09 1200 1.8 3,500 NR-4018T6R8M-K 6.8 ±20% 100 29 0.11 1060 1.8 3,500 NR-4018T100M-K 10 ±20% 100 24 0.18 840 1.8 3,500 NR-4018T150M-K 15 ±20% 100 19 0.25 650 1.8 3,500 NR-4018T220M-K 22 ±20% 100 16 0.36 590 1.8 3,500 NR-4018T330M-K 33 ±20% 100 12 0.53 490 1.8 3,500 NR-4018T470M-K 47 ±20% 100 10 0.65 420 1.8 3,500 NR-4018T680M-K 68 ±20% 100 8.3 1.00 320 1.8 3,500 NR-4018T101M-K 100 ±20% 100 6.5 1.50 280 1.8 3,500 NR-4018T221M-K 200 ±20% 100 4 4.00 170 1.8 3,500 Ordering code Inductance (μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Heigh (mm) Tape & Reel Packaging Quantity NR-6012T3R0M-K 3.0 ±20% 100 45 0.092 1730 1.2 1,000 NR-6012T4R0M-K 4.0 ±20% 100 39 0.107 1570 1.2 1,000 NR-6012T5R3M-K 5.3 ±20% 100 34 0.125 1400 1.2 1,000 NR-6012T6R8M-K 6.8 ±20% 100 30 0.165 1180 1.2 1,000 NR-6012T100M-K 10 ±20% 100 22 0.24 1000 1.2 1,000 NR-6012T150M-K 15 ±20% 100 18 0.33 790 1.2 1,000 NR-6012T220M-K 22 ±20% 100 12 0.55 630 1.2 1,000 NR-6012T330M-K 33 ±20% 100 8 0.71 530 1.2 1,000 NR-6012T470M-K 47 ±20% 100 6 1.13 460 1.2 1,000 NR-6012T680M-K 68 ±20% 100 3 1.35 410 1.2 1,000 NR-6012T101M-K 100 ±20% 100 1 2.18 320 1.2 1,000 Ordering code Inductance (μH) Inductance Tolerance Measuring Frequency (KHz) Minimum Self-resonant Frequency (MHz) Maximum DC Resistance (ΩΩ) ±30% Maximum Rated Current (mA) Maximum Heigh (mm) Tape & Reel Packaging Quantity NR-8040T1R9N-K 0.9 ±30% 100 85 0.006 7800 4.2 1,000 NR-8040T1R4N-K 1.4 ±30% 100 63 0.007 7000 4.2 1,000 NR-8040T2R0N-K 2.0 ±30% 100 50 0.009 6300 4.2 1,000 NR-8040T3R6N-K 3.6 ±30% 100 34 0.015 4900 4.2 1,000 NR-8040T4R7N-K 4.7 ±30% 100 30 0.018 4100 4.2 1,000 NR-8040T6R8N-K 6.8 ±30% 100 24 0.025 3700 4.2 1,000 NR-8040T100N-K 10 ±20% 100 22 0.034 3100 4.2 1,000 NR-8040T150N-K 15 ±20% 100 16 0.050 2400 4.2 1,000 NR-8040T220N-K 22 ±20% 100 13 0.066 2200 4.2 1,000 NR-8040T330N-K 33 ±20% 100 12 0.100 1700 4.2 1,000 NR-8040T470N-K 47 ±20% 100 8 0.150 1400 4.2 1,000 NR-8040T680N-K 68 ±20% 100 7 0.230 1100 4.2 1,000 NR-8040T101N-K 100 ±20% 100 6 0.290 1000 4.2 1,000

Power supply units: • Combats power line radiated and conducted noise Large withstand voltage (allowable current up to 6A) • Provides waveform correction of digital signals and high frequency noise Resistant to high energy countermeasures in various types of digital equipment High reliability • Automotive
There are several variations of the standard (FBMJ) type • Computer peripherals HS for broadband • Differential transmission line on USB and similar products HM for upper MHz range applications • Mobile devices which require lower power consumption HL for GHz range applications
The FBMH type is optimal for circuit designs which require impedance and large currents Operating Temperature: to combat radiated noise on power lines, etc. • -40ºC to +85ºC (includes self-generated heat) KEMET Designator Material HL, HM, HS - Contact KEMET for materials characteristics Impedance Examples: 330 = 33ΩΩ 111 = 110ΩΩ 132 = 1300ΩΩ Type FBMJ = Regular Type, FBMH = High current Case Size J 1608 (0603) H 1608 (0603) 2125 (0805) 2012 (0805) 3216 (1206) 2016 (0806) 4516 (1806) 3216 (1206) 3225 (1210) 4516 (1806) 4525 (1810) 4532 (1812) FBMJ 3216 HL 330 K Characteristic Code Dim. Code EIA Case Size L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) J 1608 0603 1.6 ±0.2 (0.063 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.3 ±0.2 (0.012 ±0.008) 2125 0805 2.0 ±0.2 (0.079 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 (0.02 ±0.002) 0.5 ±0.3 (0.020 ±0.012) 3216 1206 3.2 ±0.3 (0.126 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) 4516 1806 4.5 ±0.3 (0.177 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) H 1608 0603 1.6 ±0.1 (0.063 ±0.004) 0.8 ±0.1 (0.031 ±0.004) 0.8 ±0.1 (0.031 ±0.004) 0.3 ±0.15 (0.012 ±0.006) 2012 0805 2.0 ±0.2 (0.079 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 (0.02 ±0.002) 0.5 ±0.3 (0.020 ±0.012) 2016 0806 2.0 ±0.2 (0.079 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) 3216 1206 3.2 ±0.3 (0.126 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) 3225 1210 3.2 ±0.3 (0.126 ±0.012) 2.5 ±0.3 (0.098 ±0.012) 2.5 ±0.3 (0.098 ±0.012) 0.5 ±0.3 (0.020 ±0.012) 4516 1806 4.5 ±0.3 (0.177 ±0.012) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 0.5 ±0.3 (0.020 ±0.012) 4525 1810 4.5 ±0.4 (0.177 ±0.016) 2.5 ±0.3 (0.098 ±0.012) 2.5 ±0.3 (0.098 ±0.012) 0.9 ±0.6 (0.035 ±0.024) 4532 1812 4.5 ±0.4 (0.177 ±0.016) 3.2 ±0.3 (0.126 ±0.012) 3.2 ±0.3 (0.126 ±0.012) 0.9 ±0.6 (0.035 ±0.024) E T W L High Current Ferrite Chip Beads - FB Series M Type Part Numbering Table Dimension Table in millimeters (inches)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630024 Ordering Code Impedance (ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity

0603 Case Size High Current Ferrite Chip Beads (FB Series M Type)

0805 Case Size High Current Ferrite Chip Beads (FB Series M Type)

(ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity

1206 Case Size High Current Ferrite Chip Beads (FB Series M Type)

(ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity

1806 Case Size High Current Ferrite Chip Beads (FB Series M Type)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 25 High Impedence Type Ferrite Chip Beads (FB Series M Type) Ordering Code EIA Case Size Impedance (ΩΩ) Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (A) Thickness mm (inches) Tape & Reel Packaging Quantity

Internal silver printed layer creates a closed circuit which acts as a magnetic shield to minimize heat generation and crosstalk
No need for grounding provides greater circuit design flexibility
Several material types and a broad range of impedance values provide noise countermeasures for various applications HS: Suppresses the XL component. Helps stop the reduction of the wave-form integrity (digital wave-form overshoot, etc) HM: Increases the Z characteristics sharply above 20MHz and is applicable for radiated noise in the 100MHz-300MHz range. Especially effective on video signal lines. LL: Designed as a noise countermeasure for 200MHz-500MHz range where the rise of the Z component is in the high frequency area. LM: Intended for noise suppression around 200MHz. Effectively increase attenuation HW: The best material in the BK Series to suppress the XL component and stop the reduction of the wave-form integrity while maintaining attenuation in the high frequency area. TS: Reduced DC resistance version for noise countermeasures around LSI power supplies BKP Features:
Low Rdc values reduce power dissipation and extend battery life
No need for grounding provides greater circuit design flexibility KEMET Designator Material HM, HS, HW, LL, LM, TS Contact KEMET for materials characteristics Impedance Examples: 150 = 15ΩΩ 101 = 100ΩΩ 102 = 1000ΩΩ Type BK- = Standard, BKP = For Power Supply Lines Case Size 0603 (0201) 1005 (0402) 1608 (0603) 2125 (0805) Packaging Code T = Tape & Reel BK- 1005 HM 121 T K Dim. Code EIA Case Size L Length (inches) W Width (inches) T Thickness Maximum (inches) E (inches) 0603 0201 1.6 ±0.2 (0.063 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.8 ±0.2 (0.031 ±0.008) 0.3 ±0.2 (0.012 ±0.008) 1005 0402 1.00 ±0.05 (0.039 ±0.002) 0.50 ±0.05 (0.020 ±0.002) 0.50 ±0.05 (0.020 ±0.002) 0.25 ±0.10 (0.010 ±0.004) 1608 0603 1.6 ±0.15 (0.063 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.8 ±0.15 (0.031 ±0.006) 0.3 ±0.2 (0.012 ±0.008) 1.25 ±0.2 (0.049 ±0.008) 0.85 ±0.2 (0.033 ±0.008) 0.5 ±0.3 (0.020 ±0.012) Multilayer Ferrite Chip Beads - BK Series Part Numbering Table Dimension Table in millimeters (inches) BK Applications:
High frequency noise countermeasure in personal computers, digital cameras and other information system products. For use on digital product clock lines and general signal lines.
Radiated noise suppression in computer or printer interfaces harness connectors.
Noise suppression in video and other AV products
Prevents interference between circuits in cellular phones (PHS, PDC, etc)
Due to the closed internal circuit which acts as a magnetic shield, the TS material is extremely effective as a noise filter on LSI power supplies where downsizing of components is needed. BKP Applications:
High frequency noise countermeasures on the DC power supply line in personal computers and other information system products
Noise suppression in USB and IEEE1294 interface
Prevents interference between circuits in mobile systems (PDC, PHS, PDA) Operating Temperature:
BK: -55ºC to +125ºC (includes self-generated heat)
BKP: -55ºC to +85ºC (includes sel-generated heat) E T W L

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 27 Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity

0201 Multilayer Ferrite Chip Beads Standard Type (BK Series)

0402 Multilayer Ferrite Chip Beads Standard Type (BK Series)

0402 Multilayer Ferrite Chip Beads For Power Lines (BKP Series)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630028 Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity

0603 Multilayer Ferrite Chip Beads Standard Type (BK Series)

0603 Multilayer Ferrite Chip Beads For Power Lines (BKP Series)

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-6300 29 Ordering Code Impedance (ΩΩ) ±25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity Ordering Code Impedance (ΩΩ)+25% Measuring Frequency (MHz) Maximum DC Resistance (ΩΩ) Maximum Rated Current (mA) Thickness mm (inches) Tape & Reel Packaging Quantity

0805 Multilayer Ferrite Chip Beads Standard Type (BK Series)

0805 Multilayer Ferrite Chip Beads For Power Lines (BKP Series)

All electronic components or devices listed in this catalog are developed, designedand intended for use in general electronic equipment. Before incorporating these components into any equipment in the fields of aerospace, military or medical, where higher safety and reliability are required, please contact KEMET Corp for more details.

Through our Strategic Alliance, announced in September of 2005, Taiyo Yuden and KEMET are working together to utilize best practices in the areas of manufacturing, technology, marketing, and customer support to better serve the electronics industry.

© KEMET Electronics Corporation, P.O. Box 5928, Greenville, SC 29606 (864) 963-630032 World Sales Headquarters KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 Phone: 864-963-6300 Europe KEMET Electronics S.A. 1-3, Avenue de la Paix P.O.B. 76 CH-1211 Geneva 20, Switzerland Phone: 41-22-715-0100 Asia KEMET Electronics Marketing PTE Ltd.

101 Thomson Road, #23-03

Singapore, 307591, Singapore Phone: 65-6353-6636 KEMET Electronics Asia Ltd.

30 Canton Road, Room 1512

Tsimshatshui, Kowloon Hong Kong Phone: 852-2305-1168

Product Information

LBC2016-T680MK specifications and overview.

Summary

Surface Mount Ferrite Products

Description

Surface Mount Ferrite Products

Source title LBC2016-T680MK Datasheet(PDF) - Kemet Corporation

Related Parts

More parts from the same family.

Browse manufacturer