LBAD0XX1SC

Murata Manufacturing Co...

LTE CAT M1 Module Revision 1.2 5/4/2020

Manufacturer: Murata Manufacturing Co...

Document: 23 Pages / 679Kb

Request Quote Download Datasheet Read online HTML view

More from Murata Manufacturing Co... Browse L parts

Online Datasheet

Read LBAD0XX1SC online.

LBAD0XX1SC MURATA | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 23

Technical content

Features

LTE CAT M1 – 23 dBm
16 MB of flash
Dimension: 11.1x11.4x1.4 mm (typ), 1.5mm(max)
Package: LGA
Antenna configurations: external
SIM card: external
3GPP Rel. 13 eDRX and PSM modes
Power Consumption: enables up to 10 year battery life Hibernation current: 1.5 µA(avg) eDRX current: <45 uA (avg) @ 8 Hyperframes
PSM current: dormant window configurable
Operating temperature range: -40ºC to 85ºC
OTA firmware upgrade
Regulatory certificate:
FCC/IC: HSW-TY1SC
ETSI: EN 301 489-1 and EN 301 908-1
TELEC: 003-180242
Carrier Certifications: PTCRB (5.38), GCF (3.73)
3GPP release 13 compliant
OMA Lightweight M2M (LWM2M)
Control via AT commands according to 3GPP TS27.005, 27.007 and customized AT commands
IPv4/IPv6 stack with TCP and UDP protocol
SSL/TLS

Applications

4G LTE technology capability
Dedicated LTE half-duplex operation (HD-FDD) for CatM1
Cellular transceiver designed to meet 3GPP Rel-13 specifications
LTE universal modem supports (low-band and mid-band):
Low-band B5/B8/B12/B13/B14/B17/B18/B19/B20/B26/B28
Mid-band B1/B2/B3/B4/B25
Optimized for Class 3 LTE output power (+23 dBm)
Wearables
Building automation/Security
Medical/Healthcare
Asset Tracking LBAD0XX1SC LTE CAT M1 Module Datasheet

Revision History

Revision Date Author Change Description 0.1 04/03/2019 RF PD Preliminary version 0.2 05/20/2019 RF PD Updated feature summary; updated VBAT_FEM min voltage supply 0.3 07/23/2019 RF PD Remove any reference to NB1, set several MCU pins to NC, Updated Block Diagram 1.0 11/14/2019 RF PD Updated power specs 1.1 12/17/19 RF PD Fixed Pin 46 description 1.2 04/22/20 RF PD Fixed Dimensions of tape on page 18 and Storage period condition to 72 hours on page 21.

1 Introduction

1.1 Block Diagram

Figure 1.1 Block Diagram

1.2 Acronyms

LTE Long Term Evolution - UART Universal Asynchronous Receiver Transmitter - eUICC Embedded SIM (Subscriber Identity Module - LGA Land Grid Array - BB Baseband - RFIC Radio Frequency Integrated Circuit - GPS Global Positioning System - LB Low Band (699 MHz to 915 MHz frequency range) - MB Mid Band (1710 MHz to 2025 MHz frequency range) - PSM Power Save Mode - eDRX Extended Discontinuous Receive - GPS Global Positioning System

1.3 References

[1] Altair Semiconductor, AL1250 – Datasheet 1.18, Aug 2018

2 Mechanical Specification

2.1 Module Dimensions

Table 2.1: Module Dimensions Parameter Typical Unit Weight 0.45 (typical) g

2.2 Top and Side View

Figure 2.1 Module Top and Side View (Unit: mm)

2.3 PCB Footprint Top View

Figure 2.2 Module Footprint Top View (Unit: mm)

2.4 Pin Configuration

Figure 2.3 Pinout Diagram Top View

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2019 Type 1SC Data Sheet, 5/4/2020 Page 9 of 23 www.murata.com Table 2.2 Pinouts 1SC Pin# Module Pin Name ALT1250 Pin No ALT1250 IC Symbol Pin Name Type Direction Reset Value IO Domain / Supply

Description

1 DEBUG_RSTN P4 DEBUG_RSTN Digital I/O PU VDDIO Reserved (No

Connection)

2 DEBUG_SEL M4 DEBUG_SEL/GPIO31 Digital I/O PD VDDIO Reserved (No

Connection)

3 EJ_TDO N5 EJ_TDO/GPIO22 Digital I/O PU VDDIO Reserved (No

Connection)

4 EJ_TRST J5 EJ_TRST/GPIO20 Digital I/O PD VDDIO JTAG Test Reset -

5 PMU_AT_IN R3 PMU_AT_IN Analog I VRTC Anti-tamper input; short

6 PMU_WAKEUP P2 PMU_WAKEUP Analog I VRTC Wakeup active high;

(HI)

7 VDD_RF L1 PMU_VO_RF Power O MIPI RFFE IO (antenna

tuning)

8 VSIM R1 PMU_VO_SIM Power O SIM LDO output

9 VDD_AUX T2 PMU_VO_AUX_LDO Power O SC2 LDO output

10 VDD_XO N1 PMU_VO_XO Power O Reserved (No

Connection) 11 SIMIO M10 SC_IO/GPIO14 Digital I/O PD VDDIO SIM Data 1.8V

12 I2C1_SDA H2 I2C1_SDA/SPIS_MRDY/

PWM 3/MCU_I2C1_SDA/ MCU_FLA SH1_SCK/ UART0_RI/MCU_S PIM1_CLK_A/ MCU_PWM3/G PIO44 Digital I/O PU VDDIO Reserved (No Connection)

13 I2C1_SCL H4 I2C1_SCL/SPIS_CLK/

LED3/M CU_I2C1_SCL/ MCU_FLASH1_ CS_N/ UART0_DTR/MCU_SPI M1_EN0_A/MCU_LED3/ GPI O45 Digital I/O PU VDDIO Reserved (No Connection)

14 I2C0_SCL L7 I2C0_SCL/SPIS_MISO/

MCU_I2C0_SCL/ UART0_DSR/GPIO43 Digital I/O PU VDDIO Reserved (No Connection)

15 I2C0_SDA J7 I2C0_SDA/SPIS_MOSI/

MCU_I2C0_SD A/ UART0_DCD/ MCU_CLKOU T/GPIO42 Digital I/O PU VDDIO Reserved (No Connection)

16 VBAT_FEM Power I Input from battery to

17 VBAT_FEM Power I Input from battery to

18 VBAT_FEM Power I Input from battery to

19 GND

20 UART2_RX H14 UART2_RX/

SPIS_MOSI_A/P WM2/ EJ1_TDI_B/UART1_RX/ MCU_UART1_RX/ MCU_SPI M1_MISO_A/ MCU_SPIM0_ MISO_A/ UART3_RX_B/ MCU_PWM2/GPIO27 Digital I/O PU VDDIO • Default is UART1 Receive Data

Dedicated for Altair debug interface

21 UART2_CTS G15 UART2_CTS/

SPIS_MRDY_A/E J1_TRST_B/ UART1_CTS/ MCU_UART1_CTS/ MCU_SPIM1_C LK_A/ MCU_SPIM0_CLK_A/U Digital I/O PD VDDIO •Default is UART1 Clear to Send

Dedicated for Altair debug interface

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2019 Type 1SC Data Sheet, 5/4/2020 Page 10 of 23 www.murata.com 1SC Pin# Module Pin Name ALT1250 Pin No ALT1250 IC Symbol Pin Name Type Direction Reset Value IO Domain / Supply ART3_CTS_B/GPIO29

22 UART2_TX G13 "UART2_TX/

SPIS_MISO_A/FE M22/ EJ1_TMS_B/UART1_TX/ MCU_UART1_TX/ MCU_SPIM1_MOSI_A/ MCU_SPIM0_ MOSI_A/ UART3_TX_B/GPIO 28 Digital I/O PU VDDIO •Default is UART1 Transmit Data

Dedicated for Altair debug interface

23 GND

24 RF_GNSS_COMMON

_ANT RF O GNSS receiver output

25 RF_GNSS_ANT RF I GNSS receiver input

26 GND

27 RF_AUX_OUT1 RF I

28 GND

29 RF_RXTX RF I /O CAT-M1 RF in/out signal

30 GND

31 PWM3 N13 PWM3/I2C1_SDA/

SC_SWP/F EM29/ MCU_CC_OUT3/ MCU_CC_IN3/ MCU_LED3/MCU_P WM3/GPIO53 Digital I/O PU VDDIO TX Indicator

32 PWM0 P10 PWM0/CLKOUT/

MCU_CC_O UT0/ MCU_CC_IN0/MCU_CLK OUT/FEM28/ MCU_PWM0/G PIO50 Digital I/O PD VDDIO Device Reset Status (HI)

33 AUX_ADC4 H12 AUX_ADC4/FEM7/

PCM_OUT/MCU_LED0/ MCU_CC_OUT1/GPIO5 Digital I/O PD VDDIO External DCDC Control

34 AUX_ADC3 J13 AUX_ADC3/FEM6/

PCM_IN/K EYPAD4/ MCU_SPIM1_CLK_B/ MCU_I2C1_SCL/ SWDAT/MCU_CC_IN3/ GPIO4 Digital I/O PU VDDIO Reserved (No Connection)

35 AUX_ADC2 K14 AUX_ADC2/FEM5/

PCM_FS/K EYPAD7/ MCU_SPIM1_EN0_B/ MCU_I2C1_SDA/ SWCLK/MCU_CC_IN2/ GPIO3 Digital I/O PU VDDIO Reserved (No Connection)

36 AUX_ADC0 L13 AUX_ADC0/I2C1_SCL/

MCU_ CC_IN0/ KEYPAD9/MCU_LED 4/ PWM2/MCU_PWM2/ GPIO 1 Digital I/O PU VDDIO Reserved (No Connection)

37 AUX_ADC1 M14 AUX_ADC1/FEM4/

PCM_CLK/ KEYPAD6/ CLKOUT/MCU_LED 1/ MCU_CLKOUT/ MCU_CC_I N1/GPIO2 Digital I/O PD VDDIO GNSS coexistence indicator

38 GND

39 SF_SO/IO1 "Y14 FLASH0_IO1/GPIO71 Digital I/O PD V_FLASH Reserved (No

Connection)

40 SF_SI/IO0 "AA15 FLASH0_IO0/GPIO70 Digital I/O PU V_FLASH Reserved (No

Connection)

41 SF_nHOLD/IO3 "Y12 FLASH0_IO3/GPIO73 Digital I/O PU V_FLASH Reserved (No

Connection)

42 SF_nWP/IO2 "AA13 FLASH0_IO2/GPIO72 Digital I/O PD V_FLASH Reserved (No

Connection)

43 SPIM0_EN0 P12 SPIM0_EN0/

UART1_RTS/MC U_PCM_OUT_A/ UART0_DSR/ Digital I/O PU VDDIO Port C: UART RTS

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2019 Type 1SC Data Sheet, 5/4/2020 Page 11 of 23 www.murata.com 1SC Pin# Module Pin Name ALT1250 Pin No ALT1250 IC Symbol Pin Name Type Direction Reset Value IO Domain / Supply MCU_SPIS_CLK_B/ SWDAT/ MCU_SPIM0_EN0_A/ GPIO35

44 SPIM0_EN1 R13 SPIM0_EN1/

SPIS_SRDY_ABC/ KEYPAD4/FEM18/ MCU_SPIS_SRDY_AB/ MCU_CC_IN2/MC U_FLASH1_CS_N1/ MCU_CC_ OUT2/ GPIO36 Digital I/O PU VDDIO External LNA GNSS

45 SPIM0_MISO T12 SPIM0_MISO/

UART1_RX/MC U_PCM_FS_A/ UART0_DTR/ MCU_SPIS_MOSI_B/ MCU_U ART1_RX/ MCU_SPIM0_MISO_AB/ GPIO34 Digital I/O PU VDDIO Port C: UART RX

46 SPIM0_MOSI U13 SPIM0_MOSI/

UART1_TX/MC U_PCM_IN_A/ UART0_DCD/ MCU_SPIS_MISO_B/ SWCLK/ MCU_SPIM0_MOSI_AB/ GPI O33 Digital I/O PU VDDIO Port C: UART TX

47 NC Reserved (No

Connection)

48 VFLASH R15

PMU_VDDIO_FLASH0_ R15PMU_VO_FLASH Power O Reserved (No Connection)

49 VDDIO AA7

PMU_VDDIO PMU_VO_IO Power O IO Reference

50 VDD_RET "W9

PMU_VDD_RET PMU_VO_RET Power O Debug monitoring only

51 FLASH0_CS_N1 V14 FLASH0_CS_N1/FEM24/

Digital I/O PU V_FLASH GNSS SFN indication

52 FLASH1_CS_N M6 MCU_FLASH1_CS_N/

MCU_LED0/ FLASH1_CS_N1/ MCU_PWM0/GPIO54 Digital I/O PU VDDIO Reserved (No Connection)

53 FLASH1_IO1 R7 MCU_FLASH1_IO1/

I2C0_SCL/UART0_TX/ KEYPAD1/MCU_ I2C0_SCL/ MCU_CC_OUT1/M CU_UART1_TX/GPIO57 Digital I/O PU VDDIO Reserved (No Connection)

54 FLASH0_CS_N2 W11 FLASH0_CS_N2/FEM27/

LED5/MCU_LED5/ GPIO78 Digital I/O PU V_FLASH Reserved (No Connection)

55 FLASH1_SCK U7 MCU_FLASH1_SCK/

MCU_LED1/M CU_PWM1/GPIO55 Digital I/O PD VDDIO Reserved (No Connection)

56 PMU_VBACKUP W7 PMU_VBACKUP Power I Input from backup

57 PMU_VRTC W5 PMU_VRTC Power O Use for

PMU_SHUTDOWN and PMU_POWERBUTTON pull source

58 VBAT U3 PMU_VBAT_LDO Power I Voltage from Battery

59 V2 PMU_VBAT_DCDC_V2 Power I

60 W1 PMU_VBAT_DCDC_W1 Power I

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2019 Type 1SC Data Sheet, 5/4/2020 Page 12 of 23 www.murata.com 1SC Pin# Module Pin Name ALT1250 Pin No ALT1250 IC Symbol Pin Name Type Direction Reset Value IO Domain / Supply

61 EJ_TDI L5 EJ_TDI/GPIO21 Digital I/O PD VDDIO Reserved (No

Connection)

62 EJ_TMS K4 EJ_TMS/SWDAT/

Digital I/O PD VDDIO Reserved (No Connection)

63 PMU_AT_OUT N3 PMU_AT_OUT Analog O VRTC Anti-tamper output;

PMU_AT_IN or NC if not used

64 PMU_SHUTDOWN M2 PMU_SHUTDOWN Analog I PU VRTC "Shutdown active low ,

Modem reset (HI)

65 PMU_EXT_ALARM L3 PMU_EXT_ALARM/

2KHZ_CLK_OUT/GPO0 Analog O VDDIO Debug monitoring only

66 PMU_POWER_BUTT

K2 PMU_POWER_BUTTON Analog I PU VRTC Power button active low

67 PMU_ATB J3 PMU_ATB Test I/O VBAT Reserved (No

Connection) 68 SIMRST M8 SC_RST/GPIO13 Digital I/O PD VDDIO SIM Reset 1.8V 69 SIMCLK L9 SC_CLK/GPIO15 Digital I/O PD VDDIO SIM Clock 1.8V

70 SIM_DETECT J11 SC_DET/PWM0/FEM12/

MCU_PWM0/GPIO16 Digital I/O PD VDDIO SIM Detection 1.8V

71 SC_SWP J9 SC_SWP/CLKOUT/

MCU_PM3/EJ1_TO_AB/ CLK32KHZ_EXT/ MCU_CLKOUT/ MCU_CC_OUT3/GPI O17 Digital I/O PD VDDIO Host Wake-Up (HI)

72 UART0_RTS K8 UART0_RTS/

SPIM0_EN0_A/I 2C0_SDA/UART2_RTS/ MCU_ UART0_RTS/ EJ1_TCK_A/MC U_I2C0_SDA/ MCU_SPIM0_E N0_B/ UART3_RTS_A/GPIO26 Digital I/O PU VDDIO •Default is UART0 Request to Send

Data host interface; UART RTS (HI)

73 UART0_TX K10 UART0_TX/

SPIM0_MOSI_A/F EM15/ UART2_TX/MCU_UAR T0_TX/EJ1_TMS_A/ UART3_T X_A/GPIO24 Digital I/O PU VDDIO •Default is UART0 Transmit Data

Data host interface; UART TX (HI)

74 UART2_RTS K6 UART2_RTS/

SPIS_CLK_A/FE M23/ EJ1_TCK_B/ UART1_RTS/ MCU_UART1_RTS/ MCU_SPI M1_EN_A/ MCU_SPIM0_EN0_A/ UART3_RTS_B/GPIO30 Digital I/O PU VDDIO •Default is UART1 Request to Send

Dedicated for Altair debug interface

75 UART0_RX G11 UART0_RX/

SPIM0_MISO_A/ FEM14/ UART2_RX/MCU_UA RT0_RX/EJ1_TDI_A/ UART3_ RX_A/GPIO23 Digital I/O PU VDDIO •Default is UART0 Clear to Send

Data host interface; UART RX (HI)

76 UART0_CTS G9 UART0_CTS/

SPIM0_CLK_A/I2 C0_SCL/UART2_CTS/ MCU_U ART0_CTS/ EJ1_TRST_A/ MCU_I2C0_SCL/ MCU_SPIM0_CLK_B/ UART3_CTS_A/GPIO25 Digital I/O PU VDDIO •Default is UART0 Clear to Send

Data host interface; UART CTS (HI)

77 RFFE_SCLK H6 RFFE_SCLK/FEM10/

Digital I/O PD VDDIO MIPI RFFE Clock (antenna tuning)

78 RFFE_SDATA H8 RFFE_SDATA/FEM11/

Digital I/O PD VDDIO MIPI RFFE data (antenna tuning)

79 GND Ground

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2019 Type 1SC Data Sheet, 5/4/2020 Page 13 of 23 www.murata.com 1SC Pin# Module Pin Name ALT1250 Pin No ALT1250 IC Symbol Pin Name Type Direction Reset Value IO Domain / Supply

80 GND Ground

81 GND Ground

82 PWM1 L11 PWM1/I2C0_SDA/

MCU_SPI M1_MISO_AB/ KEYPAD5/MC U_CC_OUT1/ MCU_CC_IN1/ MCU_PWM1/GPIO51 Digital I/O PU VDDIO Reserved (No Connection)

83 PWM2 M12 PWM2/I2C0_SCL/

MCU_SPIM 1_MOSI_AB/ FEM16/MCU_C C_OUT2/MCU_CC_IN2/ MCU_PWM2/GPIO52 Digital I/O PU VDDIO Reserved (No Connection)

84 SPIM1_MISO N9 MCU_SPIM1_MISO/

SPIS_M OSI_A/ KEYPAD6/PWM1/MC U_SPIS_MOSI_A/SC_IO/ MCU_PCM_FS_B/ MCU_PWM1/G PIO39 Digital I/O PD VDDIO Reserved (No Connection)

85 SPIM1_EN P8 MCU_SPIM1_EN/

SPIS_CLK_A/KEYPAD8/ PWM3/ MCU_SPIS_CLK_A/ SC_DET/MCU_PCM_ IN_B/MCU_PWM3/ GPIO40 Digital I/O PU VDDIO Reserved (No Connection)

86 SPIM1_MOSI T8 MCU_SPIM1_MOSI/

SPIS_MI SO_A/PWM2/ MCU_PWM2/ MCU_SPIS_MISO_A/ SC_CLK/ MCU_PCM_OUT_B/ GPIO38 Digital I/O PD VDDIO Reserved (No Connection)

87 SPIM1_CLK R9 MCU_SPIM1_CLK/

SPIS_MRD Y_A/PWM0/ MCU_CC_OUT0/ MCU_SPIS_MRDY_A/ SC_RST/ MCU_PCM_CLK_B/ GPIO41 Digital I/O PD VDDIO Reserved (No Connection)

88 SF_CLK W15 FLASH0_SCK/GPIO67 Digital I/O PD V_FLASH Reserved (No

Connection)

89 GND

90 USB_DN J15 USB_DN/GPI64_3V3 Digital I VDDIO Reserved (No

Connection)

91 USB_DP L15 USB_DP/GPI63_3V3 Digital I/O VDDIO Reserved (No

Connection)

92 GND

93 USB3V3 N15 USB_V3P3 Digital I/O VDDIO Reserved (No

Connection)

94 SPIM0_CLK V12 SPIM0_CLK/

UART1_CTS/MC U_PCM_CLK_A/ UART0_RI/M CU_SPIS_MRDY_B/ MCU_UA RT1_TX/ MCU_SPIM0_CLK_A/ GPIO37 Digital I/O PU VDDIO Port C: UART CTS

95 PCM_FS R11 PCM_FS/UART1_RTS/

MCU_FLASH1_IO 1/ MCU_LED5/ MCU_UART1_ RTS/ MCU_PCM_FS/GPIO47 Digital I/O PU VDDIO Reserved (No Connection)

96 PCM_IN N11 PCM_IN/UART1_RX/

Digital I/O PU VDDIO Reserved (No Connection)

Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 2019 Type 1SC Data Sheet, 5/4/2020 Page 14 of 23 www.murata.com 1SC Pin# Module Pin Name ALT1250 Pin No ALT1250 IC Symbol Pin Name Type Direction Reset Value IO Domain / Supply MCU_FLASH1_IO2/ MCU_LED4/ MCU_UART1_RX/ MCU_PCM_IN/GPIO48

97 PCM_OUT T10 PCM_OUT/UART1_TX/

MCU_FLASH1_IO 3/ MCU_PWM2/ MCU_UART1_TX/ MCU_PCM_OUT/GPIO4 Digital I/O PU VDDIO Reserved (No Connection)

98 PCM_CLK V10 PCM_CLK/UART1_CTS/

MCU_FLASH1_I O0/ MCU_LED2/ MCU_UART1_CTS/ MCU_PCM_CLK/GPIO4 Digital I/O PD VDDIO Reserved (No Connection)

99 GND

100 CLKOUT U9 CLKOUT/

32KHZ_CLK_OUT/ PWM0/FLASH1_CS_N1/ LED2/MCU_CLKOUT/ MCU_CC_OUT1/ MCU_PWM0/GPIO60 Digital O PD VDDIO Reserved (No Connection)

101 GND

102 PMU_VCAP V6 PMU_VCAP Analog O VBAT Connecting external

103 FLASH1_IO3 N7 MCU_FLASH1_IO3/

I2C1_SCL/UART0_RTS/ KEYPAD3/ MCU_I2C1_SCL/ MCU_CC_OUT3/ MCU_UART1_RTS/ GPIO59 Digital I/O PU VDDIO Reserved (No Connection)

104 FLASH1_IO2 P6 MCU_FLASH1_IO2/

I2C1_SDA/UART0_CTS/ KEYPAD2/ MCU_I2C1_SDA/ MCU_CC_OUT2/ MCU_UART1_CTS/ GPIO58 Digital I/O PD VDDIO Reserved (No Connection)

105 FLASH1_IO0 T6 MCU_FLASH1_IO0/

I2C0_SDA/UART0_RX/ KEYPAD0/MCU_ I2C0_SDA/ MCU_CC_OUT0/ MCU_UART1_RX/ GPIO56 Digital I/O PU VDDIO Reserved (No Connection)

106 EJ_TCK R5 EJ_TCK/SWCLK/GPIO18 Digital I/O PD VDDIO Reserved (No

Connection) 107- 115 GND_PAD

3 RF Specification

The module is compliant to the 3GPP spec for release 13 and rated at a Class 3 device (23 dBm)

4 Environmental Specification

4.1 Absolute Maximum Rating

Table 4.1 Absolute Maximum Rating Parameters Min Typ Max Unit Storage Temperature -40 +85 degC Supply Voltage VBAT -0.3 - 4.35 V PMU_VBACKUP -0.3 - 4.35 V PMU_VCAP -0.3 - 4.35 V VBAT_FEM -0.5 - 5.2 V

4.2 Recommended Operating Condition

Table 4.2 Recommended Operating Condition Parameters Min Typ Max Unit Operating Temperature -40 25 +85 degC Supply Voltage VBAT 2.2 4.35 V PMU_VBACKUP 2.2 4.35 V PMU_VCAP 2.2 4.35 V VBAT_FEM 2.85 4.5 V Interface Voltage V_IO 1.7 1.8 1.9 V For VDDIO, the total current from all IOs combined, and supplied by PMU_VDDIO, should not exceed 50mA.

5 Application Information

5.1 Recommended PCB Landing Pattern

Figure 5.1 Recommended PCB Landing Pattern

6 Assembly Information

Refer to Figure6.1 for recommended soldering conditions. When products are immersed in solvent after mounting, ensure the temperature difference is within 100°C. Soldering must be done by this method to prevent products from damage. Set up the highest temperature of reflow within 260 °C. If considering other soldering conditions, you must contact Murata before proceeding. Reflow soldering standard conditions Figure6.1 Reflow Profile Please don’t use the reflow method more than twice. Use rosin type flux or a weakly active flux with a chlorine content of 0.2 wt % or less. Since this Product is Moisture Sensitive, any cleaning with liquid is NOT permitted.

7 Packaging and Marking Information

7.1 Dimensions of Tape (Plastic tape)

Figure 7.1 Tape Dimensions (Unit in mm)

7.2 Dimensions of Reel

Figure 7.2 Reel Dimensions (Unit: mm)

7.3 Taping Diagrams

Figure 7.3 Tape Diagram

7.4 Module Marking Information

Figure 7.4 shows the module marking. Dimensions are nominal, not absolute. TBD Figure 7.4 Module Marking Diagram

7.5 Moisture Sensitivity Level

The module is rated to MSL 4 (72 hours). Please observe this rating with the utmost importance.

8 Regulatory Information

The module is FCC/IC certified (HSW -TY1SC and 4492A -TY1SC) and RED ETSI EN 301908 -13, EN301908 -1, EN301489-1, EN301489-19, EN301489-52 compliant. Please contact support if you need the DoC for the module. The module is also certified for use in Japan (TELEC 003-180242).

9 RoHS Information

The Type 1SC module conforms to RoHS requirements. Product Model Name Murata Ordering Part Number Standard Order Increment Module Sample Type 1SC LBAD0XX1SC-TEMP *** pcs Development Kit Type 1SC DK LBAD0XX1SC-EVK-TEMP 1 pcs

11 Notice

11.1 Storage Conditions

Please use this product within 6 months after receipt. - The product shall be stored in original under with an ambient temperature from 5 to 35°C, and humidity from 20% to 70%RH. (Packing materials, in particular, may become deformed if the temperature exceeds 40°C.) - If the product is not used for more than 6months after receipt, confirm the solderability before use. - Store the product in non-corrosive gas (Cl2, NH3, SO2, Nox, etc.). - Avoid mechanical shock, such as dropping or puncturing the product, to preserve integrity of the packing materials. - After the package is opened, store it at <30°C / <60%RH and use the product within 72 hours. - If the color of the indicator in the packing changes, bake the product before soldering. Baking condition: 125+5/-0°C, 24hours, 1 time Baked the product on a heat-resistant tray because other materials (Base Tape, Reel Tape and Cover Tape) are not heat- resistant.

11.2 Handling Conditions

Be careful in handling or transporting products because excessive stress or mechanical shock may break products. Handle products with care to avoid cracks or damages on the terminals, causing unwarranted changes in the product characteristics. Do not touch products with bare hands to avoid degrading solder ability or damage caused by static electrical charge.

11.3 Standard PCB Design (Land Pattern and Dimensions)

All the ground terminals should be connected to the ground patterns. Furthermore, the ground pattern should be provided between IN and OUT terminals. Please refer to the specifications for the standard land dimensions. The recommended land pattern and dimensions is in accordance with Murata's standard. The characteristics of products may vary depending on the pattern drawing method, grounding method, land dimensions, land forming method of the NC terminals and the PCB material and thickness. Therefore, be sure to verify the characteristics in the actual set. If using non-standard lands, contact Murata beforehand.

11.4 Notice for Chip Placer

When positioning products on the PCB, be aware that mechanical chucking may damage products. When placing products on the PCB, a worn-out chucking locating claw or a suction nozzle can cause undue stress and uneven force, resulting in damaged products. To prevent products from damage, be sure to follow the specifications for the maintenance of the chip placer in use.

11.5 Operational Environment Conditions

Products are designed to work under normal environmental conditions (ambient temperature, humidity and pressure) as stated above. However, if products are used under the following circumstances, they may be damaged, resulting in leakage of electricity and abnormal temperatures. - In an atmosphere containing corrosive gas (Cl2, NH3, SOx, NOx, etc.). - In an atmosphere containing combustible and volatile gases. - Dusty environment. - Direct sunlight. - Excessive moisture. - Excessive humidity where water condenses. - Extreme cold, such as in freezing temperatures. If products could be exposed to those conditions described above, consult with Murata before actual use. Static electricity may degrade or destroy products. Avoid static electricity or excessive voltage while assembling and measuring.

11.6 Input Power Capacity

Avoid exceeding the input power capacity as specified in this document. If operating conditions may exceed parameters as stated in this document, inform Murata before use.

12 PRECONDITIONS TO USE MURATA PRODUCTS

PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the products is its conformance to the specifications pro vided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES RE GARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The product shall not be used in any application li sted below which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree that, if you use our products in such applications, we will not be r esponsible for any failure to meet such requirements. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS. - Aircraft equipment. - Aerospace equipment - Undersea equipment. - Power plant control equipment - Medical equipment. - Transportation equipment (vehicles, trains, ships, elevator, etc.). - Traffic signal equipment. - Disaster prevention / crime prevention equipment. -Burning / explosion control equipment - Application of similar complexity and/ or reliability requirements to the applications listed in the above. We expressly prohibit you from analyzing, breaking, reverse-engineering, remodeling altering, and reproducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our products or services are used. I nformation provided by us regarding third -party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reaso ns such as end of supply of materials and/or components from our suppliers. By signing on specification sheet or approval sheet, you acknowledge that you are the legal representative for your company and that you understand and accept the validity of the c ontents herein. When you are not able to return the signed version of specification sheet or approval sheet within 30 days from receiving date of specification sheet or approval sheet, it shal l be deemed to be your consent on the content of specification s heet or approval sheet. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim l iability for damages caused by - the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the product to be sold by you, -deviation or lapse in function of engineering sample, -improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you can’t agree the above contents, you should inquire our sales.

Product Information

LBAD0XX1SC specifications and overview.

Summary

LTE CAT M1 Module Revision 1.2 5/4/2020

Description

LTE CAT M1 Module Revision 1.2 5/4/2020

Source title LBAD0XX1SC Datasheet(PDF) - Murata Manufacturing Co., Ltd

Related Parts

More parts from the same family.

Browse manufacturer