LB1610S GOOD-ARK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • Case:ABF
  • Glass passivated standard bridge rectifiers
  • Ideal for automated placement
  • Moisture sensitivity: level 1, per J-STD-020
  • Solder dip 260 °C, 10 s
  • Plastic package has Underwriters Laboratory Flammability Classification 94V-0
  • Halogen-free according to IEC 61249-2-21 definition Typical Applications For use of general purpose AC to DC bridge rectification in power supply，charger，office appliance， home appliance and telecome device. VRRM V VRMS V VDC V Io(AV) A A A I2t A2sec TJ, TSTG °C Maximum instantaneous forward voltage IF=1.0A TA=25℃ VF Volts TA=25℃ TA=125℃ Typical junction capacitance 4.0 V, 1 MHz CJ pF RθJA RθJC RθJl Notes: 1. Mounted on FR-4 P.C.B Board Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM Maximum Ratings (TA = 25 ° C unless otherwise noted) Parameter Symbol Unit Maximum repetitive peak reverse voltage Maximum RMS voltage LB1610S LB1610SL 1000 1.6 µA 10.0 - 55 to + 150 Maximum DC reverse current at rated DC blocking voltage IR Rating for fusing(t<8.3ms) Operating junction and storage temperature range Unit Symbol Unit Typical thermal resistance(1) ℃/W 700 1000 Electrical Characteristics (TA = 25 ° C unless otherwise noted) Parameter Test Conditions Symbol Maximum DC blocking voltage Maximum average output rectified current 100Peak forward surge current 1.0 ms single square wave superimposed on rated load LB1610S LB1610SL LB1610S LB1610SL 1.0 5.0 200 Thermal Characteristics Parameter www.goodark.com 1/5 2016.05-Rev.A

Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers Reverse Voltage 1000V Output Current 1.6A Package Outline Dimensions DIM MIN MAX MIN MAX A 1.25 1.35 0.049 0.053 A1 0.00 0.15 0.000 0.006 B 0.50 0.70 0.020 0.028 C 0.15 0.30 0.006 0.012 D 3.80 4.20 0.150 0.165 E1 4.40 4.60 0.173 0.181 E2 5.00 5.20 0.197 0.205 L 0.25 0.65 0.010 0.026 HE 6.00 6.40 0.236 0.252 H 1.20 1.30 0.047 0.051 Unit: mm TAPING ORIENTATION Unit: mm Unit: inch www.goodark.com 3/5 2016.05-Rev.A

Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers Reverse Voltage 1000V Output Current 1.6A Soldering Parameters Peak Temperature : 260+0/-5° C Dipping Time : 10 seconds Soldering : 1 time Do not exceed 260° C 260° C Peak Temperature (TP) 240+0/-5 ° C Wave Soldering Ramp-down Rate 6° C/second max 6° C/second max Time 25° C to peak Temperature (TP) 6 minutes Max. 8 minutes Max. 240+0/-5° C Time within 5° C of actual peak Temperature (tp) 10 –30 seconds 20 – 40 seconds TS(max) to TL - Ramp-up Rate 3° C/second max 3° C/second max Reflow - Temperature (TL) (Liquidus) 183° C 217° C - Time (min to max) (ts) 60 – 150 seconds 60 – 150 seconds Average ramp up rate (Liquidus Temp (TL) to peak) 3° C/second max 3° C/second max Reflow Soldering Sn-Pb Eutectic Assembly Pb-Free assembly Pre Heat - Temperature Min (Ts(min)) 100° C 150° C - Temperature Max (Ts(max)) 150° C 200° C - Time (min to max) (ts) 60 – 120 secs 60 – 180 secs www.goodark.com 4/5 2016.05-Rev.A

Low Profile Miniature Single Phase Surface Mount Bridge Rectifiers Reverse Voltage 1000V Output Current 1.6A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good- Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 5/5 2016.05-Rev.A