LB1608

LB2518T101K TAIYO-YUDEN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

notice_e-01 Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change wi thout notice due to technical improvements, etc. Therefore, please check for the latest information carefully be - for e practical application or usage of the Products. P lease note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo - ra ting such products, which are caused under the conditions other than those specified in this catalog or individual sp ecification. ■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is av ailable. ■ Please conduct validation and verification of products in actual condition of mounting and operating environment be fore commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for us e in general electronics equipment.(for AV, office automation, household, office supply, information service, te lecommunications, ( such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, di saster prevention, medical, public information network (telephone exchange, base station) etc. which may have di rect influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. D o not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma - ri ne system, military, etc. where higher safety and reliability are especially required. I n addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil - it y evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to in stall a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu - to rs (so called “TA IYO YUDEN’s official sales channel ”). It is only applicable to the products purchased from any of TAIYO YUDEN ’ s of ficial sales channel. ■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc - cu r in connection with a third party's intellectual property rights and other related rights arising from your usage of pr oducts in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export C ertain items in this catalog may require specific procedures for export according to “Fo reign Exchange and For - eign Trade Control Law ” o f Japan, “U.S. Export Administration Regulations ”, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff.

80 wound01_e-02 ■ FEATURES ■ ORDERING CODE ■ EXTERNAL DIMENSIONS/STANDARD QUANTITY ■ AVAILABLE INDUCTANCE RANGE ■ APPLICATIONS ■ OPERATING TEMP. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. Surface Mounting ・ Mounting and soldering con - ditions should be checked be forehand. ・ Applicable so ldering process to those products is reflow so ldering only. ・ Recommended Land Patterns EXTERNAL DIMENSIONS LB-series are Wound Chip Inductors having wide line-up, which are suitable for any circuit designs. ◦ LBC series has large rated current. They contribute to the miniatur - iz ation of the power supply circuit. ◦ LB R series has low DC resistance. They contribute to the miniaturiza - tion of the power supply circuit. ◦ LB MF series has a low loss characteristic. ◦ They are suitable for an anti-noise measure on the power supply circuit of DSC, DVC, HDD, LCD-TV, mobile phones,PC, game equipments, various communication equipments and etc.. ◦ －40 ～105℃ （In cluding-self-generated heat ） WIRE-WOUND CHIP INDUCTORS (LB SERIES) L B △ 2 0 1 2 T 1 0 0 △ △ △ △ △ ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ Type L W T e Standard Quantity [pcs] Pa per Tape Embossed Ta pe LB1608 1.6±0.1 （0.063±0.004） 0.8±0.1 （0.031±0.004） 0.8±0.1 （0.031±0.004） 0.35±0.15 LBMF1608 1.6±0.2 （0.063±0.008） 0.8±0.2 （0.031±0.008） 0.8±0.2 （0.031±0.008） 0.45±0.15 LB2012 LBC2012 LBR2012 2.0±0.2 （0.079±0.008） 1.25±0.2 （0.049±0.008） 1.25±0.2 （0.049±0.008） 0.5±0.2 LB2016 LBC2016 2.0±0.2 （0.079±0.008） 1.6±0.2 （0.063±0.008） 1.6±0.2 （0.063±0.008） 0.5±0.2 LB2518 LBC2518 LBR2518 2.5±0.2 （0.098±0.008） 1.8±0.2 （0.071±0.008） 1.8±0.2 （0.071±0.008） 0.5±0.2 LB3218 3.2±0.2 （0.128±0.008） 1.8±0.2 （0.071±0.008） 1.8±0.2 （0.071±0.008） 0.6±0.2 LBC3225 3.2±0.2 （0.128±0.008） 2.5±0.2 （0.098±0.008） 2.5±0.2 （0.098±0.008） 0.6±0.3 Unit：mm（in ch） ❶Type LB Wound chip inductor ❽Internal code❼Special code △ Standard pr oducts R Low Rdc ty pe ❸External Dimensions 〔mm〕 2012（0805） 2 .0×1.25 ❺Nominal Inductance〔μH〕 example 1R0 1 100 10 101 100 ※R=decimal po int ❷Shape △ Standard products C Hi gh current R Lo w Rdc MF L ow loss ❻Inductance Tolerances 〔％〕 K ±10 M ±20 ❹Packaging T Tape & Reel Unit：mm TYPE A B C 1608 0.55 0. 7 0.9 MF 1608 0.55 0. 7 1.0 12 0.60 1. 0 1.45 16 0.60 1. 0 1.8 18 0.60 1. 5 2.0 18 0.85 1. 7 2.0 25 0.85 1. 7 2.7 A A C B REFLOW Range Type LB1608 LBMF1608 LB2012 LBC2012 LBR2012 LB2016 LBC2016 LB2518 LBC2518 LBR2518 LB3218 LBC3225 70 0.55 100 10μH 35 2.5 45 7.0 90 5.8 47μH 47μH 1000 100μH 100μH 100μH 100μH 15 24 45 28.0 100μH 39 27 100μH 680μH 1000μH 1000μH Inductance ［μH］

81wound01_e-02 INDUCTORS ʗSTANDARD INDUCTORS ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• 1608（0603） TYPE Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB 1608T1R0M Ro HS 1.0 ±20% 100 0.17 160 7.96LB 1608T2R2M Ro HS 2.2 80 0.33 115 LB 1608T4R7M Ro HS 4.7 45 0.55 70 LB 1608T8R2M Ro HS 8.2 32 0.70 60 2.52LB 1608T100M Ro HS 10 32 0.70 60 Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LBMF1608T1R0M RoHS 1.0 ±20% 100 0.09 230 7.96LBMF1608T2R2M RoHS 2.2 80 0.17 160 LBMF1608T3R3M RoHS 3.3 60 0.22 130 LBMF1608T4R7M RoHS 4.7 45 0.24 110 LBMF1608T100 □ RoHS 10 ±10% ±20% 32 0.36 80 2.52LBMF1608T220 □ RoHS 22 16 1.0 50 LBMF1608T470□ RoHS 47 11 2.5 35 ・□Please specify the Inductance tolerance code （K or M）
• 2012（0805） T YPE
• 2016（0806）T YPE Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB C2012T1R0M Ro HS 1.0 ±20% 100 0.19 620 7.96LB C2012T2R2M Ro HS 2.2 70 0.33 430 LB C2012T4R7M Ro HS 4.7 45 0.50 295 LB C2012T100□ Ro HS 10 ±10% ±20% 40 1.2 200 2.52LB C2012T220□ Ro HS 22 16 3.7 130 LB C2012T470□ Ro HS 47 11 5.8 90 ・□Please specify the Inductance tolerance code （K or M） Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB 2016T1R0M Ro HS 1.0 ±20% 100 0.09 490 7.96 LB 2016T1R5M Ro HS 1.5 80 0.11 380 LB 2016T2R2M Ro HS 2.2 70 0.13 375 LB 2016T3R3M Ro HS 3.3 55 0.20 285 LB 2016T4R7M Ro HS 4.7 45 0.25 225 LB 2016T6R8M Ro HS 6.8 38 0.35 200 LB 2016T100□ Ro HS 10 ±10% ±20% 32 0.50 155 2.52 LB 2016T150□ Ro HS 15 28 0.70 130 LB 2016T220□ Ro HS 22 16 1.0 105 LB 2016T330□ Ro HS 33 14 1.7 85 LB 2016T470□ Ro HS 47 11 2.4 70 LB 2016T680□ Ro HS 68 10 3.0 55 LB 2016T101□ Ro HS 100 8 4.5 40 0.796 ・□Please specify the Inductance tolerance code （K or M） Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB 2012T1R0M Ro HS 1.0 ±20% 100 0.15 405 7.96 LB 2012T2R2M Ro HS 2.2 80 0.23 260 LB 2012T3R3M Ro HS 3.3 55 0.30 235 LB 2012T4R7M Ro HS 4.7 45 0.40 190 LB 2012T6R8M Ro HS 6.8 38 0.47 135 LB 2012T100□ Ro HS 10 ±10% ±20% 32 0.70 120 2.52 LB 2012T100□R Ro HS 10 32 0.50 120 LB 2012T150□ Ro HS 15 28 1.3 100 LB 2012T220□ Ro HS 22 16 1.7 80 LB 2012T470□ Ro HS 47 11 3.7 60 LB 2012T680□ Ro HS 68 10 6.0 50 LB 2012T101□ Ro HS 100 8 7.0 45 0.796 ・□Please specify the Inductance tolerance code （K or M） Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB R2012T1R0M Ro HS 1.0 ±20% 100 0.07 400 7.96LB R2012T2R2M Ro HS 2.2 80 0.13 260 LB R2012T4R7M Ro HS 4.7 45 0.24 200 LB R2012T100□ Ro HS 10 ±10% ±20% 32 0.36 150 2.52LB R2012T220□ Ro HS 22 16 1.0 100 LB R2012T470□ Ro HS 47 11 1.7 75 LB R2012T101□ Ro HS 100 8 4.0 50 0.796 ・□Please specify the Inductance tolerance code （K or M）

82 wound01_e-02 ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• 2518（1007） TYPE Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB C2016T1R0M Ro HS 1.0 ±20% 100 0.10 690 7.96 LB C2016T1R5M Ro HS 1.5 80 0.15 600 LB C2016T2R2M Ro HS 2.2 70 0.20 520 LB C2016T3R3M Ro HS 3.3 55 0.27 410 LB C2016T4R7M Ro HS 4.7 45 0.37 355 LB C2016T6R8M Ro HS 6.8 38 0.59 290 LB C2016T100□ Ro HS 10 ±10% ±20% 32 0.82 245 2.52 LB C2016T150□ Ro HS 15 28 1.2 200 LB C2016T220□ Ro HS 22 16 1.8 165 LB C2016T330 □ Ro HS 33 14 2.8 135 LB C2016T470□ Ro HS 47 11 4.3 110 LB C2016T680 □ Ro HS 68 10 7.0 95 LB C2016T101□ Ro HS 100 8 8.0 75 0.796 ・□Please specify the Inductance tolerance code （K or M） Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB R2518T1R0M Ro HS 1.0 ±20% 100 0.045 960 7.96LB R2518T2R2M Ro HS 2.2 68 0.07 480 LB R2518T4R7M Ro HS 4.7 45 0.10 345 LB R2518T100□ Ro HS 10 ±10% ±20% 30 0.19 235 2.52LB R2518T220□ Ro HS 22 19 0.44 175 LB R2518T470□ Ro HS 47 11 0.84 120 LB R2518T101□ Ro HS 100 9 1.89 80 0.796 ・□Please specify the Inductance tolerance code （K or M） Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB 2518T1R0M Ro HS 1.0 ±20% 100 0.06 665 7.96 LB 2518T1R5M Ro HS 1.5 80 0.07 405 LB 2518T2R2M Ro HS 2.2 68 0.09 340 LB 2518T3R3M Ro HS 3.3 54 0.11 280 LB 2518T4R7M Ro HS 4.7 46 0.13 240 LB 2518T4R7MR Ro HS 4.7 46 0.10 235 LB 2518T6R8M Ro HS 6.8 38 0.15 195 LB 2518T100□ Ro HS 10 ±10% ±20% 30 0.25 165 2.52 LB 2518T150□ Ro HS 15 23 0.32 145 LB 2518T220□ Ro HS 22 19 0.50 115 LB 2518T330□ Ro HS 33 15 0.70 95 LB 2518T470□ Ro HS 47 12 0.95 85 LB 2518T680□ Ro HS 68 9.5 1.5 70 LB 2518T101□ Ro HS 100 9.0 2.1 60 0.796 LB 2518T151□ Ro HS 150 7.0 3.2 45 LB 2518T221□ Ro HS 220 5.5 4.5 40 LB 2518T331□ Ro HS 330 4.5 7.0 30 LB 2518T471□ Ro HS 470 3.5 10 25 LB 2518T681□ Ro HS 680 3.0 17 20 LB 2518T102□ RoHS 1000 2.4 24 15 0.252 ・□Please specify the Inductance tolerance code （K or M） Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB C2518T1R0M Ro HS 1.0 ±20% 100 0.080 775 7.96 LB C2518T1R0MR Ro HS 1.0 100 0.065 890 LB C2518T1R5M Ro HS 1.5 80 0.11 730 LB C2518T2R2M Ro HS 2.2 68 0.13 630 LB C2518T3R3M Ro HS 3.3 54 0.16 560 LB C2518T4R7M Ro HS 4.7 41 0.20 510 LB C2518T6R8M Ro HS 6.8 38 0.30 420 LB C2518T100□ Ro HS 10 ±10% ±20% 30 0.36 375 2.52 LB C2518T150□ Ro HS 15 23 0.65 285 LB C2518T220□ Ro HS 22 19 0.77 250 LB C2518T330□ Ro HS 33 15 1.5 185 LB C2518T470□ Ro HS 47 12 1.9 165 LB C2518T680□ Ro HS 68 9.5 2.8 140 LB C2518T101□ Ro HS 100 9.0 3.7 125 0.796 LB C2518T151□ Ro HS 150 7.0 6.1 95 LB C2518T221□ Ro HS 220 5.5 8.4 80 LB C2518T331□ Ro HS 330 4.5 12.3 65 LB C2518T471□ Ro HS 470 3.5 22 50 LB C2518T681□ Ro HS 680 3.0 28 45 ・□Please specify the Inductance tolerance code （K or M）

83wound01_e-02 INDUCTORS ʗSTANDARD INDUCTORS ■ PART NUMBERS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

• 3218（1297） TYPE
• 3225（1210） T YPE Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB 3218T1R0M Ro HS 1.0 ±20% 100 0.06 1075 7.96 LB 3218T1R5M Ro HS 1.5 80 0.07 860 LB 3218T2R2M Ro HS 2.2 68 0.09 775 LB 3218T3R3M Ro HS 3.3 54 0.11 560 LB 3218T4R7M Ro HS 4.7 41 0.13 550 LB 3218T6R8M Ro HS 6.8 40 0.17 380 LB 3218T100□ Ro HS 10 ±10% ±20% 30 0.25 340 2.52 LB 3218T150□ Ro HS 15 25 0.32 300 LB 3218T220□ Ro HS 22 19 0.49 255 LB 3218T330□ Ro HS 33 15 0.75 215 LB 3218T470□ Ro HS 47 12 0.92 205 LB 3218T680□ Ro HS 68 11 1.49 145 LB 3218T101□ Ro HS 100 8 2.4 140 0.796 LB 3218T151□ Ro HS 150 7 3.2 105 LB 3218T221□ Ro HS 220 5 5.4 80 LB 3218T331□ Ro HS 330 4 7.0 65 LB 3218T471□ Ro HS 470 3.5 14 54 LB 3218T681□ Ro HS 680 3.0 17 45 LB 3218T102□ Ro HS 1000 2.4 27 39 0.252 ・□Please specify the Inductance tolerance code （K or M） Ordering code EHS Inductance 〔μH〕 Inductance To lerance Self-resonant fr equency 〔MHz〕min. DC Resistance 〔Ω〕 （±30％ ） Rated current A〕max. Measuring frequency Hz〕 LB C3225T1R0MR Ro HS 1.0 ±20% 250 0.055 1100 0.1 LB C3225T1R5MR Ro HS 1.5 220 0.060 1000 LB C3225T2R2MR Ro HS 2.2 190 0.080 930 LB C3225T3R3MR Ro HS 3.3 160 0.095 820 LB C3225T4R7MR Ro HS 4.7 70 0.100 680 LB C3225T6R8MR Ro HS 6.8 50 0.120 620 LB C3225T100 □R Ro HS 10 ±10% ±20% 23 0.133 540 LB C3225T150□R Ro HS 15 20 0.195 420 LB C3225T220 □R Ro HS 22 17 0.27 330 LB C3225T330 □R Ro HS 33 13 0.41 300 LB C3225T470□R Ro HS 47 10 0.67 220 LB C3225T680 □R Ro HS 68 8 1.0 190 LB C3225T101□R Ro HS 100 6 1.4 150 ・□Please specify the Inductance tolerance code （K or M）

84 wound01_e-02 ■ ELECTRICAL CHARACTERISTICS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ■DC Bias characteristics （Measured by HP4285A＋42841A） Inductance ʤЖHʥ DC Bias ʤmAʥ LBC2518 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LB1608 1 1 0 0.1 100 100 1000 1R0M 100M Inductance ʤЖHʥ DC Bias ʤmAʥ LBMF1608 1 1 0 0.1 100 1000 1R0M 100˘ 4R7M Inductance ʤЖHʥ DC Bias ʤmAʥ LB2012 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LBC2012 1 1 0 0.1 100 100 1000 1R0M 470˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LBR2012 1 1 0 100 1000 100 1000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LB2016 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LBC2016 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LB2518 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LBR2518 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ LB3218 1 1 0 0.1 100 1000 100 100001000 1R0M 101˘ 100˘ Inductance ʤЖHʥ DC Bias ʤmAʥ ̡ ̗ ̘3225 1 1 0 0.1 100 100 100001000 101˘̧ 100˘̧ 1R0MR

85wound01_e-02 INDUCTORS ʗSTANDARD INDUCTORS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0103_reli-PRP1wound0103_reli_e-01 ■ PACKAGING ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. ②Tape material ③Taping Dimensions ◦Embossed Tape （0.315 inches wide ） ◦Card board carrier tape （0.315 inches wide ） Type Chip cavity Insertion pitch Tape thickness A B F T K LBM 2016 1. 75±0.1 （0.069±0.004） 2.1±0.1 （0.083±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 1.9max. （0.075max.） LEM 2520 2.3±0.1 （0.091±0.004） 2.7±0.1 （0.106±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.1±0.1 （0.083±0.004） LBC3225/ CBC3225 2.8±0.1 （0.110±0.004） 3.5±0.1 （0.138±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 4.0max. （0.157max.） LB3218 2.1±0.1 （0.083±0.004） 3.5±0.1 （0.138±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.2max. （0.087max.） LB2518 / CB2518 LB C2518 / CBC2518 LB R2518 2.15±0.1 （0.085±0.004） 2.7±0.1 （0.106±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 2.2max. （0.087max.） LB2016/ CB2016 LBC2016 / CBC2016 1.75±0.1 （0.069±0.004） 2.1±0.1 （0.083±0.004） 4.0±0.1 （0.157±0.004） 0.3±0.05 （0.012±0.002） 1.9max. （0.075max.） LB2012 / CB2012 LBC2012 / CBC2012 LBR2012 1.45±0.1 （0.057±0.004） 2.25±0.1 （0.089±0.004） 4.0±0.1 （0.157±0.004） 0.25±0.05 （0.010±0.002） 1.45max. （0.057max.） CBL2012 1.55±0.1 （0.061±0.004） 2.3±0.1 （0.091±0.004） 4.0±0.1 （0.157±0.004） 1.1max. （0.043max. ） 1.1max. （0.043max. ） LB1608 1.0±0.1 （0.039±0.004） 1.8±0.1 （0.071±0.004） 4.0±0.1 （0.157±0.004） 1.1max. （0.043max. ） 1.1max. （0.043max. ） LBMF1608 / CB MF1608 1.1±0.1 （0.043±0.004） 1.9±0.1 （0.075±0.004） 4.0±0.1 （0.157±0.004） 0.25±0.05 （0.010±0.002） 1.2max. （0.047max.） Unit：mm（inch） ①Minimum Quantity Type Standard Quantity ［pcs］ Papar Tape Em bossed Tape LB C3225/CBC3225 ー 1000 LB3218 ー 2000 LBR2518/LBC2518/LB251 /CB2518/CBC2518/LEM2520 ー 2000 LBM2016/LBC2016/ LB2016/CB2016/CBC2016 ー 2000 LB2012/LBC2012/LBR202 /CB2012/CBC2012 ー 3000 CBL2012 4000 ー LB1608 4000 ー LBMF1608/CBMF1608 ー 3000◦Embossed tape ④Leader and Blank Portion (10 pitches or more) (10 pitches or more) (5.9 inches or more) 150mm or more ⑤Reel Size The top tape requires a peel-off force 0.2 to 0.7N in the direction of the arrow as illustrated below. ⑥Top Tape Strength Pull direction 10.0ʶ1.5 (0.394ʶ0.059) П180 ʢП7.09 ) ʵ0.118 П60 ʢП2.36 )ʴ1 ʴ0.039 2.5 max ʢ0.098ʣ

wound0103_reli-PRP2 wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1.Operating temperature Range LB, LBC, LBR, LBMF Series ー40～＋105 ℃ （Including self-generated heat）CB, CBC, CBL, CBMF Series LBM Series LEM Series ー40～＋85 2.Storage LB, LBC, LBR, LBMF Series ー40～＋85 ℃CB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Please refer the term of "7. storage conditions" in pr ecautions. 3.Rated Current LB, LBC, LBR, LBMF Series Within the specified toleranceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LEM Series The maximum DC value having inductance decrease within 10％ and temperatur e increase within 20℃ by the application of DC bias. 4.Inductance LB, LBC, LBR, LBMF Series Within the specified toleranceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LEM Series Measuring equipment：LCR Meter（HP4285A＋42851A or its equivalent ） Measuring frequency：Specified fr equency LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF・LBM Series Measuring equipment：LCR Mater（ HP4285A or its equivalent） 5.Q LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM, LEM Series Within the specified tolerance 【Test Methods and Remarks】 LEM Series Measuring equipment：LCR Meter （HP4285A＋42851A or its equivalent Measuring frequency：Specified fr equency LBM Series Measuring equipment ：LCR Mater（HP4285A or its equivalent ） 6.DC Resisitance LB, LBC, LBR, LBMF Series Within the specified toleranceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Measuring equipment：DC Ohmmeter（HIOKI 3227 or its equivalent ） 7.Self-Resonant Frequency LB, LBC, LBR, LBMF Series Within the specified toleranceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Measuring equipment：Impedance analyzer（HP4291A or its equivalent ） 8.Temperature Characteristic LBM2016 LEM2520 Inductance change:Within±5％ LB1608 LB2012 LBR2012 CB2012 CBL2012 LB2016 CB2016 LB2518 LBR2518 CB2518 LBC3225 CBC3225 Inductance change:Within±20％ LBMF1608 CBMF1608 LBC2016 CBC2016 LBC2518 CBC2518 LB3218 Inductance change:Within± 25％ LBC2012 CBC2012 Inductance change:Within± 35％ 【Test Methods and Remarks】 Change of maximum inductance deviation in step 1-5 LB, CB Series Step 1 2 3 4 5 Temperture（℃） 20 ー40 20 （Reference temperature ） ＋85 （Maximum operating temperature ） 20 LEM2520 Step 1 2 3 4 5 Temperture（℃） 20 ー25 20 （Reference temperature ） ＋85 （Maximum operating temperature ） 20 9.Rasistance to Flexure of Substrate LB, LBC, LBR, LBMF Series No damage.CB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Warp： 2mm（ LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF Series） Pressing jig Board LBɾLBMFɾ CBMF1608 ɹ ɿ 0.8mm Others ɿ 1.0mm LEM2520：1.6mm 3mm （LEM2520） Test substrate: Board according to JIS C0051

wound0103_reli-PRP3wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 10.Body Strength LB, LBC, LBR, LBMF Series No damage.CB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LB・LBC・LBR・CB・CBC・CBL・LBM・LEM2520 Applied for ce：10N Duration：10sec. LB1608・LBMF1608・CBMF1608 Applied force：5N Duration：10sec. 11.Adhesion of terminal electrode LB, LBC, LBR, LBMF Series No abnormality.CB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF・LEM2520 Applied force：10N to X and Y directions Duration：5 sec. Test substrate：Printed board LB1608・CBMF1608・LBMF1608 Applied force：5N to X and Y dir ections Duration：5 sec. Test substrate：Printed board 12.Resistance to vibration LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM, LEM Series Inductance change:Within±5％ No significant abnormality in appearance. 【Test Methods and Remarks】 LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：According to JIS C5102 clause 8.2. Vibration type：A Dir ections：2 hrs each in X, Y and Z directions. T otal：6 hrs Frequency range：10 to 55 to 10 Hz （1min. ） Amplitude：1.5mm Mounting method：Soldering onto printed board Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 13.Drop test LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change:Within±5％ N o significant abnormality in appearance. 【Test Methods and Remarks】 LEM： Acceleration：980m/sec2 Duration：6msec Number of times：6 sides × 3 times Mounting method：Soldering onto printed board Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 14.Solderability LB, LBC, LBR, LBMF Series At least 90％ of surface of terminal electrode is cover ed by newCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 LEM： Solder temperature：230±5 ℃ Duration：5±0.5sec. Flux：Methanol solution with 25％ of colophony LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： Solder temperatur e：245±5℃ Duration：5±0.5sec Flux：Methanol solution with 25％ of colophony

wound0103_reli-PRP4 wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 15.Resistance to soldering LB, LBC, LBR, LBMF Series Inductance change:Within±10％CB, CBC, CBL, CBMF Series LEM Series Inductance change:Within±5％ LEM2520 No significant abnormality in appearance. 【Test Methods and Remarks】 LEM： Reflow condition 3 times of reflow over at 220±5℃ for 40sec. MAX, With Peak temperatur e at 240±5℃ for 5 sec. MAX. （Refer to a Profile of chart below .） Flow condition Solder temperature：260±5℃ Duration：10±1sec. Once 3 times of reflow oven at 230℃ MIN for 40sec. with peak temperatur e at 260 ℃ for 5sec. 16.Resisitance to solvent LB, LBC, LBR, LBMF Series No significant abnormality in appearanceCB, CBC, CBL, CBMF Series LBM, LEM Series 【Test Methods and Remarks】 Solvent temperature：Room temperature T ype of solvent：Isopropyl alcohol Cleaning conditions：90s. Immersion and cleaning. 17.Thermal shock LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 LEM : Conditions for 1cycle Step Temperature （℃） Duration（min） 1 ー40 30 2 ＋85 30 Number of cycle ：100 cycle Recovery ：At least 1 hr of recovery under the standar d condition after the test, followed by the measurement within 2 hrs. LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： ー40～＋85 ℃, maintain times 30min. ,100 cycle Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. 18.Damp heat life test LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 Temperatur e：60±2℃ Humidity：90～95％RH Duration：1000 hrs Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 19.Loading under damp heat life test LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 Temperatur e：60±2℃ Humidity：90～95％RH Duration：1000 hrs Applied current：Rated current Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs.

wound0103_reli-PRP5wound0103_reli_e-01 ■ RELIABILITY DATA ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 20.High temperature life test LB, LBC, LBR, LBMF Series CB, CBC, CBL, CBMF Series Inductance change:Within±10％ No significant abnormality in appearance.LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 Temperatur e：85±2℃ Duration：1000 hrs Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 21.Loading at high temperature life test LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance. CB, CBC, CBL, CBMF Series LBM, LEM Series est Methods and Remarks】 Temperatur e：85±2℃ Duration：1000 hrs Applied current：Rated current Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. 22.Low temperature life test LB, LBC, LBR, LBMF Series Inductance change:Within±10％ No significant abnormality in appearance.CB, CBC, CBL, CBMF Series LBM Series LEM Series Inductance change :Within±10％ R12～4R7：30 min. 5R6～330：25 min. 390～820：20 min. 101：15 min. 【Test Methods and Remarks】 Temperatur e：－40±2 ℃ Duration：1000 hrs Recovery：At least 2 hrs of recovery under the standar d condition after the test, followed by the measurement within 48 hrs. LEM：Recovery At least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. 23.Standard condition LB, LBC, LBR, LBMF Series Standard test conditions Unless specified, Ambient temperature is 20±15℃ and the Relative humidity is 65± 20％. If ther e is any doubt about the test results, further measurement shall be had within the following limits: Ambient Temperature: 20±2 Relative humidity: 65±5％ Inductance value is based on our standard measurement systems. CB, CBC, CBL, CBMF Series LBM, LEM Series

wound0103_reli-PRP6 wound0103_reli_e-01 ■ PRECAUTIONS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 1．Circuit Design Precautions ◆Operating environment 1． T he products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, me asuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might r esult in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2．PCB Design Precautions ◆Land pattern design 1．Please contact any of our offices for a land pattern, and refer to a recommended land pattern of a right figure or specifications. Technical consider- ations PRECAUTIONS 【Recommended Land Patter ns】 Surface Mounting ・ Mounting and soldering conditions should be checked beforehand. ・ Applicable soldering process to those products is reflow soldering only. 3．Considerations for automatic placement Precautions ◆Adjustment of mounting machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked befor ehand. Technical consider- ations 1. When installing products, care should be taken not to apply distortion str ess as it may deform the products. 4．Soldering Precautions ◆Wave soldering （LEM T ype only） 1．For wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant specifications. ◆Reflow soldering （LB and CB Types ） 1．For reflow soldering with either leaded or lead-free solder,the profile specified in "point for controlling" is recommended. ◆Reflow soldering （LEM） 1．For r eflow soldering, please apply conditions meeting the range of the specified conditions in our catalog or the relevant specifications. ◆Recommended conditions for using a soldering ir on 1．Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350℃ Duration-3 seconds or less. The soldering iron shoud not come in contact with inductor directly. T echnical consider- ations ave soldering （LEM T ype only） 1．Components can be damaged by excessive heat where soldering conditions exceed the specified range. ◆Reflow soldering （LB and CB Types ） 1．Reflow profile 300 250 200 150 100 Pre-heat zone 90ʶ30 sec 30ʶ10 sec 230ˆ Minn Peak Temp: 260ʴ0/ʔ5ˆ 5 sec Max 180ˆ 150ˆ ◆Recommended conditions for using a soldering iron 1．Components can be damaged by excessive heat where soldering conditions exceed the specified range. 5．Cleaning Precautions ◆Cleaning conditions Washing by supersonic waves shall be avoided. Technical consider- ations ◆Cleaning conditions If washed by supersonic waves, the pr oducts might be broken. 6．Handling Precautions ◆Handling 1．There is a case that a characteristic varies with magnetic influence. ◆Br eakaway PC boards （splitting along perforations ） 1．Planning pattern configurations and the position of products should be carefully performed to minimize stress. ◆Mechanical considerations 1．Ther e is a case to be damaged by a mechanical shock. Technical consider- ations ◆Handling 1．Keep the inductors away fr om all magnets and magnetic objects. ◆Br eakaway PC boards （splitting along perforations ） 1．When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the board. 2．Board separation should not be done manually, but by using the appropriate devices. ◆Mechanical considerations 1．Please do not give the inductors any excessive mechanical shocks. 7．Storage conditions Precautions ◆Storage 1．Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. Technical consider- ations ◆Storage 1．To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. ・Recommended conditions Ambient temperature：0～40℃ ／ Humidity：Below 70% RH The ambient temperature must be kept below 30℃ even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, LE type inductors should be used within one year from the time of delivery. LB type：Should be used within 6 months from the time of delivery. LE type：In case of storage over 6 months, solderability shall be checked before actual usage. LEM Type，LB Type，CB Type