DS138 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 20

Technical content

DS138 LUXEON CoB with CrispWhite Technology Line Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved. No. E352519 LUXEON CoB with CrispWhite Technology Line Retail lighting that makes an impact The LUXEON CoB with CrispWhite Technology Line creates the most impactful retail lighting ever available, by revealing the richest whites, vibrant reds and colors that pop. LUXEON CoB with CrispWhite Technology delivers the warm saturated colors of high 90CRI solutions while creating a natural crisp whiteness by activating fluorescent whitening agents in paints and fabrics to properly display merchandise in retail shops; ideal for CDM/CMH replacements. FEATURES AND BENEFITS PRIMARY APPLICATIONS Lumen packages from 500 to 5,000 lumens for a range of options Downlights Industry’s smallest light emitting surface (LES) for highest flux densities High Bay & Low Bay Up to 4x lower thermal resistance than competitors enabling smaller heat sinks and higher lumens Lamps Contains violet LEDs and does NOT contain UV LEDs for minimal amount of damage, much lower than that from traditional CDM shop lighting Spotlights Mouse bites for M2 and M3 make it easy to work with NOT RECOMMENDED FOR NEW DESIGNS

  • LUXEON CoB with CrispWhite Technology (Gen 2) For NEW designs consider these replacement products:

DS138 LUXEON CoB with CrispWhite Technology Line Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. i Table of Contents NOT RECOMMENDED FOR NEW DESIGNS

DS138 LUXEON CoB with CrispWhite Technology Line Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON CoB with CrispWhite Technology LEDs are tested and binned with a DC drive current specified below at a junction temperature, T j, of 85°C. 200mA – LUXEON CoB 1202s and 1202 300mA – LUXEON CoB 1203 450mA – LUXEON CoB 1204 600mA – LUXEON CoB 1205 900mA – LUXEON CoB 1208 1200mA – LUXEON CoB 1211 Part Number Nomenclature Part numbers for LUXEON CoB with CrispWhite Technology follow the convention below: L H C 1 – A A B B – D D D D C R S P (Traditional Part Number Scheme) L 2 C 1 – A A B B 1 2 0 2 0 6 A C 0 (New Part Number Scheme) Where: A A – designates nominal CCT (30=3000K) B B – designates minimum CRI (90=90CRI) D D D D – designates product configuration (1202=1202, 1203=1203, 1204=1204, 1205=1205, 1208=1208, 1211=1211) Therefore, the following part numbers are used for LUXEON CoB 1203 with CrispWhite Technology 3000K CCT 90CRI: L H C 1 – 3 0 9 0 – 1 2 0 3 C R S P Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long- term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON CoB with CrispWhite Technology is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). NOT RECOMMENDED FOR NEW DESIGNS

DS138 LUXEON CoB with CrispWhite Technology Line Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. 3 Performance Characteristics Product Selection Guide Table 1 . Product performance of LUXEON CoB with CrispWhite Technology at test current, T j=85ºC . NOMINAL CCT MINIMUM CRI [1] LUMINOUS FLUX [2] (lm) TYPICAL LUMINOUS EFFICACY (lm/W) TEST CURRENT (mA) LES [3] (mm) PART NUMBER MINIMUM TYPICAL 3000K 90 550 600 85 200 6.5 L2C1-3090120206AC0 3000K 90 550 625 90 200 9.0 LHC1-3090-1202CRSP 3000K 90 850 950 90 300 9.0 LHC1-3090-1203CRSP 3000K 90 1250 1400 90 450 13.0 LHC1-3090-1204CRSP 3000K 90 1700 1900 90 600 13.0 LHC1-3090-1205CRSP 3000K 90 2500 2800 90 900 15.0 LHC1-3090-1208CRSP 3000K 90 3400 3750 90 1200 19.0 LHC1-3090-1211CRSP Notes for Table 1: 1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 3. Light emitting surface (LES) is the inner diameter (phosphor area) inside the dam. Optical Characteristics Table 2 . Optical characteristics for LUXEON CoB with CrispWhite Technology at test current, T j=85°C . PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2] L2C1-3090120206AC0 135° 115° LHC1-3090-xxxxCRSP 135° 115° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. NOT RECOMMENDED FOR NEW DESIGNS

DS138 LUXEON CoB with CrispWhite Technology Line Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. 4 Electrical and Thermal Characteristics Table 3 . Electrical and thermal characteristics for LUXEON CoB with CrispWhite Technology at test current, T j=85ºC . PART NUMBER FORWARD VOLTAGE [1] (V) TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE [2] (mV/°C) TYPICAL THERMAL RESISTANCE—JUNCTION TO CASE [3] (°C/W)MINIMUM TYPICAL MAXIMUM L2C1-3090120206AC0 33 35.5 38 -16 0.98 LHC1-3090-1202CRSP 33 35.5 38 -16 0.91 LHC1-3090-1203CRSP 33 35.5 38 -16 0.70 LHC1-3090-1204CRSP 33 35.5 38 -16 0.53 LHC1-3090-1205CRSP 33 35.5 38 -16 0.45 LHC1-3090-1208CRSP 33 35.5 38 -16 0.29 LHC1-3090-1211CRSP 33 35.5 38 -16 0.23 Notes for Table 3: 1. Lumileds maintains a tolerance of ±2% on forward voltage measurements. 2. Measured between 25°C and 85°C. 3. Junction temperature to back of the PCB and measurement tolerance of ~10%. Absolute Maximum Ratings Table 4 . Absolute maximum ratings for LUXEON CoB with CrispWhite Technology . PARAMETER MAXIMUM PERFORMANCE DC Forward Current [1,2] 2x test current for LHC1–xxxx–xxxxCRSP and L2C1–xxxx120206AC0 LED Junction Temperature [1] (DC & Pulse) 125°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3B Operating Case Temperature [1] -40°C to 105°C LED Storage Temperature -40°C to 120°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed 20% of the maximum allowable DC forward current NOT RECOMMENDED FOR NEW DESIGNS

DS138 LUXEON CoB with CrispWhite Technology Line Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. 9 Forward Current Characteristics Figure 4a . Typical forward current vs . forward voltage for L2C1-3090120206AC0 and LHC1–3090–1202CRSP at T j=85ºC . Figre 4b . Typical forward current vs . forward voltage for LHC1–3090–1203CRSP at T j=85ºC . NOT RECOMMENDED FOR NEW DESIGNS

Table 5. 3-step MacAdam ellipse color bin definitions for LUXEON CoB with CrispWhite Technology.

  1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Figure 7 . 3000K 3-step MacAdam ellipse color bin .

DS138 LUXEON CoB with CrispWhite Technology Line Product Datasheet 20161007 ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com. NOT RECOMMENDED FOR NEW DESIGNS