L293D STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repeti- tive) PER CHANNEL ENABLE FACILITY OVERTEMPERATURE PROTECTION LOGICAL ”0” INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES

DESCRIPTION

The Device is a monolithic integrated high volt- age, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power tran- sistors. To simplify use as two bridges each pair of chan- nels is equipped with an enable input. A separate supply input is provided for the logic, allowing op- eration at a lower voltage and internal clamp di- odes are included. This device is suitable for use in switching appli- cations at frequencies up to 5 kHz. The L293D is assembled in a 16 lead plastic packaage which has 4 center pins connected to- gether and used for heatsinking The L293DD is assembled in a 20 lead surface mount which has 8 center pins connected to- gether and used for heatsinking. June 1996 BLOCK DIAGRAM SO(12+4+4) Powerdip (12+2+2) ORDERING NUMBERS: L293DD L293D

Symbol Parameter Value Unit VS Supply Voltage 36 V V SS Logic Supply Voltage 36 V Vi Input Voltage 7 V V en Enable Voltage 7 V Io Peak Output Current (100µs non repetitive) 1.2 A P tot Total Power Dissipation at Tpins=9 0°C4 W Tstg,T j Storage and Junction Temperature – 40 to 150 °C THERMAL DATA Symbol Decription DIP SO Unit R th j-pins Thermal Resistance Junction-pins max. – 14 °C/W R th j-amb Thermal Resistance junction-ambient max. 80 50 (*) °C/W R th j-case Thermal Resistance Junction-case max. 14 – (*) With 6sq. cm on board heatsink. PIN CONNECTIONS (Top view) SO(12+4+4) Powerdip(12+2+2) L293D - L293DD

ELECTRICAL CHARACTERISTICS (for each channel, VS =2 4V , VSS = 5 V, Tamb =2 5°C, unless otherwise specified) Symbol Parameter Test Conditions Min. Typ. Max. Unit VS Supply Voltage (pin 10) V SS 36 V V SS Logic Supply Voltage (pin 20) 4.5 36 V IS Total Quiescent Supply Current (pin 10) Vi=L; I O =0; V en =H 2 6 m A Vi=H; I O =0; V en = H 16 24 mA Ven =L 4 m A ISS Total Quiescent Logic Supply Current (pin 20) Vi=L; IO =0; V en = H 44 60 mA Vi=H; I O =0; V en = H 16 22 mA Ven = L 16 24 mA V IL Input Low Voltage (pin 2, 9, 12, 19) – 0.3 1.5 V VIH Input High Voltage (pin 2, 9, 12, 19) VSS ≤ 7 V 2.3 V SS V VSS > 7 V 2.3 7 V IIL Low Voltage Input Current (pin 2, 9, 12, 19) VIL= 1.5 V – 10 µA IIH High Voltage Input Current (pin 2, 9, 12, 19) 2.3 V≤ VIH ≤ VSS – 0.6 V 30 100 µA Ven L Enable Low Voltage (pin 1, 11) – 0.3 1.5 V Ven H Enable High Voltage (pin 1, 11) VSS ≤ 7 V 2.3 V SS V VSS > 7 V 2.3 7 V Ien L Low Voltage Enable Current (pin 1, 11) Ven L= 1.5 V – 30 – 100 µA Ien H High Voltage Enable Current (pin 1, 11) 2.3 V≤ Ven H ≤ VSS – 0.6 V ± 10 µA VCE(sat)H Source Output Saturation Voltage (pins 3, 8, 13, 18) IO = – 0.6 A 1.4 1.8 V VCE(sat)L Sink Output Saturation Voltage IO = + 0.6 A 1.2 1.8 V V F Clamp Diode Forward Voltage IO = 600nA 1.3 V tr Rise Time (*) 0.1 to 0.9 V O 250 ns tf Fall Time (*) 0.9 to 0.1 V O 250 ns ton Turn-on Delay (*) 0.5 V ito 0.5 VO 750 ns toff Turn-off Delay (*) 0.5 V ito 0.5 VO 200 ns (*) See fig. 1. L293D - L293DD

POWERDIP16 PACKAGE MECHANICAL DATA DIM. mm inch a1 0.51 0.020 B 0.85 1.40 0.033 0.055 b 0.50 0.020 b1 0.38 0.50 0.015 0.020 D 20.0 0.787 E 8.80 0.346 e 2.54 0.100 e3 17.78 0.700 F 7.10 0.280 I 5.10 0.201 L 3.30 0.130 Z 1.27 0.050 L293D - L293DD

SO20 PACKAGE MECHANICAL DATA DIM. mm inch A 2.65 0.104 a1 0.1 0.2 0.004 0.008 a2 2.45 0.096 b 0.35 0.49 0.014 0.019 b1 0.23 0.32 0.009 0.013 C 0.5 0.020 c1 45 1.772 D 1 12.6 0.039 0.496 E 10 10.65 0.394 0.419 e 1.27 0.050 e3 11.43 0.450 F 1 7.4 0.039 0.291 G 8.8 9.15 0.346 0.360 L 0.5 1.27 0.020 0.050 M 0.75 0.030 S8 ° (max.) L293D - L293DD

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as criticalcomponents in life support devices or systems without express written approval of SGS-THOMSON Microelectronics.  1996 SGS-THOMSON Microelectronics – Printed in Italy – All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. L293D - L293DD