L1T2-3085000000000

L1T2-3070000000000 LUMILEDS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 19

Technical content

Features

• Compact 3737 package
• Typical Vf of 2.8V and thermal resistance of 3K/W
• Hot tested at Tj = 85°C
• Freedom from Binning - 3 & 5 SDCM
• Exceeds ENERGY STAR lumen maintenance requirements
• UL-recognized component [E352519] with level 4 enclosure consideration Benefits
• High luminance for directional applications
• Optimized for extreme efficacy
• Excellent color consistency
• Proven reliability LUXEON TX Datasheet DS133 ©2013 Philips Lumileds Lighting Company. Key Applications
• Downlights
• High Bay & Low Bay
• Indoor Area Lighting
• Lamps
• Outdoor LUXEON TX Extreme efficacy that will transform your next market leading luminaire Introduction LUXEON® TX emitters are illumination grade LEDs designed to deliver high efficacy with high flux density to enable directional and high-lumen applications. With Freedom from BinningTM and extreme performance, LUXEON TX emitters ensure system color point accuracy and provide lamp and luminaire designers with the flexibility to optimize for the highest possible efficacy or for low system cost, in vast Correlated Color Temperature (CCT) ranges at 70 CRI from 3000K to 6500K, at 80 and 85 CRI from 2700K to 5000K, and at 90 CRI from 2700K to 3000K.

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. i Table of Contents

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. 2 General Information Product Nomenclature LUXEON TX emitters are specified and binned “hot” under conditions comparable to those found in “real-world” lighting products. The test conditions for LUXEON TX are 700 mA DC with junction temperature at 85°C. The base part number designation is explained as follows: L 1 T 2 – x x y y s 0 0 0 0 z z z 0 Where: xx — designates nominal ANSI CCT (27 for 2700K, 30 for 3000K) yy — designates minimum CRI performance (70 for 70 CRI, 80 for 80 CRI) s — designates SDCM (0 for full distribution, 3 for 3-step SDCM, 5 for 5-step SDCM) zzz — designates minimum flux level at standard binning current and temperature (210 for 210 lm, etc.) Therefore, 80 CRI 3-step SDCM products tested and binned at 3000K with a 210 lm minimum flux at binning current and temperature will have the part numbering scheme: L 1 T 2 – 3 0 8 0 3 0 0 0 0 2 1 0 0 The base part numbers referred to in this document in the following format indicate full flux and color distribution: L 1 T 2 – x x y y 0 0 0 0 0 0 0 0 0 Average Lumen Maintenance Characteristics LUXEON TX products are tested in compliance with LM-80. Please visit the LM-80 documentation site at www.philipslumileds.com/support/documentation/lumen-maintenance or contact your local Philips Lumileds Technical Solutions Manager for TM-21 extrapolations or other support. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON TX complies with the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS and REACH directives. Philips Lumileds will not intentionally add the following restricted material to the LUXEON TX: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. 3 Product Selection Product Selection Guide for LUXEON TX Emitters, Junction T emperature = 85°C T able 1. Typical Performance Characteristics Base Part Number Nominal ANSI CCT Min CRI Min Luminous Flux (lm) Typical Luminous Flux (lm) Typical Forward Voltage (V) Typical Efficacy (lm/W) 700 mA 700 mA 350 mA 700 mA 1000 mA 350 mA 700 mA 1000 mA 350 mA 700 mA 1000 mA L1T2-3070000000000 3000K 70 230 135 245 327 2.71 2.80 2.86 142 125 114 L1T2-4070000000000 4000K 70 250 147 269 360 2.71 2.80 2.86 155 137 126 L1T2-5070000000000 5000K 70 260 151 275 369 2.71 2.80 2.86 159 140 129 L1T2-5770000000000 5700K 70 260 151 275 369 2.71 2.80 2.86 159 140 129 L1T2-6570000000000 6500K 70 260 151 275 369 2.71 2.80 2.86 159 140 129 L1T2-2780000000000 2700K 80 200 118 216 289 2.71 2.80 2.86 124 110 101 L1T2-3080000000000 3000K 80 210 124 227 304 2.71 2.80 2.86 131 116 106 L1T2-3580000000000 3500K 80 220 130 238 319 2.71 2.80 2.86 137 121 112 L1T2-4080000000000 4000K 80 230 136 247 331 2.71 2.80 2.86 143 126 116 L1T2-5080000000000 5000K 80 230 135 247 332 2.71 2.80 2.86 142 126 116 L1T2-2785000000000 2700K 85 170 102 186 249 2.71 2.80 2.86 108 95 87 L1T2-3085000000000 3000K 85 180 108 197 264 2.71 2.80 2.86 114 101 92 L1T2-3585000000000 3500K 85 190 114 208 279 2.71 2.80 2.86 120 106 98 L1T2-4085000000000 4000K 85 200 120 217 291 2.71 2.80 2.86 127 111 102 L1T2-5085000000000 5000K 85 200 118 217 292 2.71 2.80 2.86 124 111 102 L1T2-2790000000000 2700K 90 160 96 175 234 2.71 2.80 2.86 101 89 82 L1T2-3090000000000 3000K 90 170 103 188 252 2.71 2.80 2.86 109 96 88 Notes for Table 1: 1. Philips Lumileds maintains a tolerance of ± 6.5% on luminous flux and ± 2 on CRI measurements.

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. 4 Optical Characteristics LUXEON TX at 700 mA, Junction T emperature = 85°C T able 2. Base Part Number Nominal ANSI CCT Color T emperature CCT Typical T otal Included Angle [2] (degrees) u0 .90V Typical Viewing Angle [3] (degrees) 2u ½Typical L1T2-2780000000000 L1T2-2785000000000 L1T2-2790000000000 2700K 2725K 160 120 L1T2-3070000000000 L1T2-3080000000000 L1T2-3085000000000 L1T2-3090000000000 3000K 3045K 160 120 L1T2-3580000000000 L1T2-3585000000000 3500K 3465K 160 120 L1T2-4070000000000 L1T2-4080000000000 L1T2-4085000000000 4000K 3985K 160 120 L1T2-5070000000000 L1T2-5080000000000 L1T2-5085000000000 5000K 5028K 160 120 L1T2-5770000000000 5700K 5665K 160 120 L1T2-6570000000000 6500K 6530K 160 120 Notes for Table 2: 1. Test current is 700 mA D.C. for all L1T2-xxyy000000000 emitters. 2. Total angle at which 90% of total luminous flux is captured. 3. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. 5

Electrical Characteristics

Electrical Characteristics at 700 mA for LUXEON TX Junction T emperature = 85°C T able 3. Nominal ANSI CCT Base Part Number Forward Voltage Vf [1] (V) Typical T emperature Coefficient of Forward Voltage [2] (mV/°C) DVF / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) Ru J-C Minimum Maximum 2700K L1T2-2780000000000 L1T2-2785000000000 L1T2-2790000000000 2.5 3.25 -1.6 3 3000K L1T2-3070000000000 L1T2-3080000000000 L1T2-3085000000000 L1T2-3090000000000 2.5 3.25 -1.6 3 3500K L1T2-3580000000000 L1T2-3585000000000 2.5 3.25 -1.6 3 4000K L1T2-4070000000000 L1T2-4080000000000 L1T2-4085000000000 2.5 3.25 -1.6 3 5000K L1T2-5070000000000 L1T2-5080000000000 L1T2-5085000000000 2.5 3.25 -1.6 3 5700K L1T2-5770000000000 2.5 3.25 -1.6 3 6500K L1T2-6570000000000 2.5 3.25 -1.6 3 Notes for Table 3: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between Tj = 25°C and TJ = 110°C at If = 700 mA. Absolute Maximum Ratings T able 4. Parameter LUXEON TX DC Forward Current [1] [2] 1050 mA 1200 mA Peak Pulsed Forward Current [1] [3] 1200 mA 1350 mA LED Junction Temperature [1] 150°C 135°C ESD Sensitivity < 8000V Human Body Model (HBM) Class 3A per JEDEC JS-001-2012 Operating Case Temperature at 700 mA -40°C - 135°C Storage Temperature -40°C - 135°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vr) [4] [5] LUXEON TX LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum. For additional information on thermal measurement guidelines please refer to Application Brief AB106. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple”, with frequencies ≥100 Hz and amplitude ≤ 150 mA are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC Forward Current at the corresponding maximum junction temperature. 3. Pulsed operation with a peak drive current equal to the stated Peak Pulsed Forward Current is acceptable if the pulse on-time is ≤ 5 ms per cycle and the duty cycle is ≤ 50%. 4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse voltage does not exceed 5V and the reverse current is less than 200μA. 5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.

Figure 1. T emperature profile for T able 6.

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. 7 Mechanical Dimensions Notes for Figure 2: 1. Do not handle the device by the lens. Excessive force on the lens may damage the lens itself or the interior of the device. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The thermal pad is electrically isolated from the anode and cathode contact pads. Figure 2.

1. All dimensions are in millimeters.
2. The figure shows the recommended LUXEON TX layout on Printed Circuit Board (PCB).
3. For more information on assembly and layout, please refer to Application Brief 106 (AB106).

Figure 3. Solder pad layout.

Figure 6. Color Spectrum of L1T2-xx90000000000.

Figure 9. T ypical forward current vs. forward voltage, L1T2-xxyy000000000.

12 MAX

8 MAX

Figure 10. Emitter pocket tape packaging.

330.00 REEL DIAMETER

Figure 11. Emitter reel packaging.

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. 15 Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux and forward voltage (Vf). Color is offered in a single 3-step or 5-step MacAdam ellipse color space centered on the ANSI CCT color bins. For additional information please review the MacAdam ellipse technical definition section. Decoding Product Bin Labeling LUXEON TX emitters are labeled using a four digit alphanumeric CAT code following the format below: ABCD A B C D Flux Bin Nominal ANSI CCT SDCM Definition Vf min max see flux bin table 1 6500K 3 3-step (80, 85, 90 CRI) P 2.50V 2.75V 2 5700K U R 2.75V 3.00V 3 5000K L S 3.00V 3.25V 5 4000K 5 5-step (70 CRI) 6 3500K A 5-step (80, 85, 90 CRI)7 3000K B 8 2700K C D

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. 16 Product Binning and Labeling, Continued Table 7 lists the standard photometric luminous flux bins for LUXEON TX emitters (tested and binned at 700 mA and Tj = 85°C). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. T able 7. Flux Bins – White Bin Code Minimum Photometric Flux (lm) G 160 H 170 J 180 K 190 L 200 M 210 N 220 P 230 Q 240 R 250 S 260 T 270 U 280 V 290 W 300

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. 17 LUXEON TX 3-step and 5-step MacAdam Ellipse Color Definition T ested at 700 mA DC and Junction T emperature = 85°C T able 8. LUXEON TX Product Characteristics for 3-step MacAdam Ellipse Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle T able 9. LUXEON TX Product Characteristics for 5-step MacAdam Ellipse Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle Note for Tables 8 & 9:

• Philips Lumileds maintains a tester tolerance of ± 0.005 on x, y color coordinates.

LUXEON TX Datasheet DS133 20131023 ©2013 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www .philipslumileds .com www .philipslumileds .cn .com Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. Who We Are Philips Lumileds focuses on one goal: Creating the world’s highest performing LEDs. The company pioneered the use of solid-state lighting in breakthrough products such as the first LED backlit TV, the first LED flash in camera phones, and the first LED daytime running lights for cars. Today we offer the most comprehensive portfolio of high quality LEDs and uncompromising service. Philips Lumileds brings LED’s qualities of energy efficiency, digital control and long life to spotlights, downlights, high bay and low bay lighting, indoor area lighting, architectural and specialty lighting as well as retrofit lamps. Our products are engineered for optimal light quality and unprecedented efficacy at the lowest overall cost. By offering LEDs in chip, packaged and module form, we deliver supply chain flexibility to the inventors of next generation illumination. Philips Lumileds understands that solid state lighting is not just about energy efficiency. It is about elegant design. Reinventing form. Engineering new materials. Pioneering markets and simplifying the supply chain. It’s about a shared vision. Learn more about our comprehensive portfolio of LEDs at www .philipslumileds .com. RoHS COMPLIANT No. E352519