L1MC-RGB0035000MP0 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

DS242 LUXEON Multicolor Module 0.5W Product Datasheet ©2019 Lumileds Holding B.V. All rights reserved. The LUXEON MultiColor Module 0.5W is a compact 3-in-1 package that offers flexibility and versatility. With the ability to control individually or all at the same time the color control is precise. LUXEON MultiColor Module 0.5W RGB 3-in-1 versatile package FEATURES AND BENEFITS PRIMARY APPLICATIONS RGB 3-in-1 module Panel Lights 3.5mm x 3.5mm – Display Wall Individually control each channel Linear IPX8 water resistant rating Wall Wash Landscape Lighting No. E352519

DS242 LUXEON Multicolor Module 0.5W Product Datasheet 20190311 ©2019 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS242 LUXEON Multicolor Module 0.5W Product Datasheet 20190311 ©2019 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON MultiColor Module 0.5W LEDs are tested and binned with a DC drive current of 20mA at a junction temperature, Tj, of 25ºC. Part Number Nomenclature The part number for the LUXEON MultiColor Module 0.5W follows the convention below:: L 1 M C – A A A 0 0 3 5 0 B 0 M P 0 Where: A A A – designates color (R=Red, G=Green, B=Blue) B – designates binning Therefore, the following part number is used for the Red, Green, Blue LUXEON MultiColor Module LED: L 1 M C – R G B 0 0 3 5 0 0 0 M P 0 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long- term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON MultiColor Module 0.5W is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

DS242 LUXEON Multicolor Module 0.5W Product Datasheet 20190311 ©2019 Lumileds Holding B.V. All rights reserved. 3 Performance Characteristics Product Selection Guide Table 1 . Product performance of LUXEON MultiColor Module 0 .5W at 20mA, T j=25ºC . COLOR DOMINANT WAVELENGTH [1] (nm) INTENSITY [2] (mcd) PART NUMBER MINIMUM MAXIMUM MINIMUM TYPICAL Red 619 625 850 1000 L1MC-RGB0035000MP0Green 520 530 1800 2300 Blue 465 478 360 500 Red Any one color bin Any one intensity bin from G to H L1MC-RGB0035010MP0 [3]Green Any one color bin from 20 to 21 Any one intensity bin from R to T Blue Any one color bin from 30 to 33 Any one intensity bin from A to D Notes for Table 1: 1. Lumileds maintains a tolerance of ±1nm on dominant wavelength measurements. 2. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements. 3. The part number means that only one single CAT Code for each color will be orderable and shipped in certain quantities. Optical Characteristics Table 2 . Optical characteristics for LUXEON MultiColor Module 0 .5W at 20mA, T j=25°C . COLOR PART NUMBER TYPICAL SPECTRAL HALF-WIDTH [1] (nm) TYPICAL TEMPERATURE COEFFICIENT OF DOMINANT WAVELENGTH (nm/°C) TYPICAL TOTAL INCLUDED ANGLE [2] TYPICAL VIEWING ANGLE [3] Red L1MC-RGB00350x0MP0 15 0.04 66° 102° Green 25 0.04 66° 102° Blue 18 0.04 66° 102° Notes for Table 2: 1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity. 2. Total angle at which 90% of total luminous flux is captured. 3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3 . Electrical and thermal characteristics for LUXEON MultiColor Module 0 .5W at 20mA, T j=25°C . COLOR PART NUMBER FORWARD VOLTAGE [1] (Vf) TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE [2] (mV/°C) TYPICAL THERMAL RESISTANCE—JUNCTION TO SOLDER PAD (°C/W)MINIMUM TYPICAL MAXIMUM Red L1MC-RGB00350x0MP0 1.70 2.10 2.50 -1.6 75 Green 2.60 2.80 3.40 -2.4 120 Blue 2.60 3.00 3.40 -2.6 85 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements. 2. Measured between 25°C and 85°C.

DS242 LUXEON Multicolor Module 0.5W Product Datasheet 20190311 ©2019 Lumileds Holding B.V. All rights reserved. 4 Absolute Maximum Ratings Table 4 . Absolute maximum ratings for LUXEON MultiColor Module 0 .5W . PARAMETER RED GREEN AND BLUE DC Forward Current [1, 2] 50mA 35mA Peak Pulsed Forward Current [1, 3] 200mA 100mA LED Junction Temperature [1] (DC & Pulse) 115°C 115°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2 LED Storage Temperature -40°C to 100°C Soldering Temperature JEDEC 020c 250°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON MultiColor Module 0.5W LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Single-color light. 3. At 0.01ms pulse on time test with a pulse period of 0.1ms.

DS242 LUXEON Multicolor Module 0.5W Product Datasheet 20190311 ©2019 Lumileds Holding B.V. All rights reserved. 7 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux, intensity, radiometric power, color point, peak wavelength, dominant wavelength and forward voltage. LUXEON MultiColor Module 0.5W LEDs are labeled using a 12-digit alphanumeric CAT code following the format below: A B C D – Red E F G H – Green J K L M – Blue Where: A E J – designates intensity for the red, green and blue LED (example: B=440 to 520mcd, S=2200 to 2500mcd) BC FG KL – designates color, dominant wavelength bin (example: Red 10=619 to 625nm, Green 20=520 to 525nm, Blue 31=468 to 471nm) D H M – designates forward voltage bin (example: A=1.70 to 2.4V, B=2.60 to 3.40V) Therefore, a LUXEON MultiColor Module 0.5W LED with a red intensity of 975 to 1150mcd / color 619 to 625nm / forward voltage of 1.70 to 2.50V; green intensity of 2200 to 2500mcd / color 525 to 530nm / forward voltage of 2.60 to 3.40V; blue intensity of 440 to 520mcd / color 468 to 471nm and forward voltage of 2.60 to 3.40V has the following CAT Code: H 1 0 A – Red S 2 1 B – Green B 3 1 B – Blue

availability in a particular bin varies by production run and by product performance. Table 5. Intensity bin definitions for LUXEON MultiColor Module 0.5W.

  1. Lumileds maintains a tolerance of ±10% on intensity measurements.

Table 6. Dominant wavelength bins for LUXEON MultiColor Module 0.5W at 20mA, T j=25°C .

  1. Lumileds maintains a tolerance of ±1nm on dominant wavelength measurements.

Table 7. Forward voltage bin definitions for LUXEON MultiColor Module 0.5W.

  1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.

DS242 LUXEON Multicolor Module 0.5W Product Datasheet 20190311 ©2019 Lumileds Holding B.V. All rights reserved. 9 Mechanical Dimensions Notes for Figure 5: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 5 . Mechanical dimensions for LUXEON MultiColor Module 0 .5W .

Table 8. Reflow profile characteristics for LUXEON MultiColor Module 0.5W. Table 9 . Moisture sensitivity levels for LUXEON MultiColor Module 0 .5W .

  1. Waterproof test is conducted on the component level by assembling the module on a PCB, isolating the electrical path by silicone. It is recommended to test the product in the application and

Figure 6. Visualization of the acceptable reflow temperature profile as specified in Table 8.

DS242 LUXEON Multicolor Module 0.5W Product Datasheet 20190311 ©2019 Lumileds Holding B.V. All rights reserved. 11 Solder Pad Design Notes for Figure 7: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 7 . Recommended PCB solder pad layout for LUXEON MultiColor Module 0 .5W . LUXEON MultiColor Module 3535 RGB 0.5W Footprint

DS242 LUXEON Multicolor Module 0.5W Product Datasheet 20190311 ©2019 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents. About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world better, safer, more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com.