L17DM53741

L17DM53745-8 AMPHENOL | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

Hybrid D’Sub series TW / E1 Amphenol D’Sub TW Hybrid Series permits a mix of contacts including signal, power, shielded, high voltage and fiber optics in the same housing with 18 different contacts arrangements. This economic series was fist developed from our military series, and has improved features: - new contacts - new high temperature black thermoplastic insert - PCB configurations come preloaded with fixed contacts and brackets. These connectors are supplied with screw machined contacts which are fixed in the insulator. Acomplete range of housings are also available for cable application.

• Commercial
• Medical
• Industrial
• Telecom
• Any application requiring optimization of space A full range of arrangements compatible with reflow process A full range of arrangements compatible with reflow process Specifications
• Connectors according to: MIL C24308 - NFC93425 - HE507 Materials and platings Shells Steel-Tin plating Insulators High temperature black thermoplastic Signal contacts Female: machined bronze Material Male: machined brass Plating finish 16µ “Au over 79µ” Ni min. Or 30µ” Au over 79µ” Ni min. Shielded contacts Female: machined bronze Material Male: machined brass Plating Inner conductor 16µ “Au or 30µm Au over 79µ” Ni Outer ring 10µ “Au over 79µ” Ni Terminations Tinned Except solder cup and crimp terminations gold flash Power contacts Female: machined bronze Material Male: machined brass Plating Contacts 16µ “Au or 30µ” Au over 79µ” Ni Terminations Tinned Except solder cup and crimp terminations gold flash Brackets Steel-Tin plating Front jackscrews Brass-Tin plating Rear clinch nuts Brass-Tin plating Boardlocks Bronze-Tin plating Stand-off Brass-Tin plating Electrical Data Current rating Signal contacts 7.5 A. with 10 A. peaks Power contacts PCB terminations 10 to 40 A. Solder cup terminations 10 to 40 A. Crimp terminations 10 to 40 A. Shielded contacts 0.5 A. Voltage rating Signal and power contacts 300 V.R.M.S. at 50 Hz Shielded contacts 150 V.R.M.S. at 50 Hz Shielded contacts Frequency range 0-1 GHz Attenuation 0.2dB Characteristic impedance 50 Ohms Dielectric withstanding voltage ≥ 1000 V.R.M.S. at 50Hz Insulation resistance ≥ 5000 M Ohms at 500 VDC Contact resistance ≤ 5m Ohms Shell resistance ≤ 1m Ohm (electrical grounding) Climatic Data Operating temperature -55˚C + 155˚C (with peaks up to 180˚C) Damp heat 56 days (40˚C - 95% HR) Salt spray 48 hours Mechanical data Shells With or without dimples Contact retention force in dielectric material > 40N Maximum mating and unmating force With dimples E size = 70 N A size = 80 N B size = 100 N C size = 150 N D size = 180 N Without dimples E size = 30 N A size = 50 N B size = 80 N C size = 120 N D size = 160 N Compatible with process IR - Air convectioned 260˚ for 20 s. Resistance to solder iron heat 260˚C for 30 s. Mating cycles ≥ 200 (classe ll) or 500 (classe l) Blind mating system Available upon request Polarization Available with locking accessories Consult factory

Shell and contacts plating TECHNICAL DATA Housing arrangements Male front view 5W1 E 7W2 A 11W1 A 3W3 A 5W5 B 9W4 B 13W3 B 17W2 B 21W1 B 27W2 C 13W6 C 17W5 C 21W4 C 8W8 C 25W3 C 24W7 D 36W4 D 43W2 D CLASS ll 0.4µm (16µ”) Au contacts gold plating 200 mating cycles Types Shells and plating Tin plated shell * Male and female Tin plated shell with dimples Male only 77 TW 717 TW CLASS l 0.76µm (30µ”) Au contacts gold plating 500 mating cycles Types Shells and plating Tin plated shell * Male and female Tin plated shell with dimples Male only 177 TW 777 TW

Optimal cutout for rear mounting Standard cutout TECHNICAL DATATW / E1 ø 3.1 H J 10˚ 1.5 F A B G D’D E 0.9 G A A B B D C øG G H R D C F E 10˚ 10˚ Rd Rading J Rd Rading J Shell size E A B C D Shell size E A B C D Contact P: Pin S: Socket P S P S P S P S P S A ±0.25 (±.010) 30.7 (1.209”) 39.0 (1.535”) 52.9 (2.083”) 69.2 (2.724”) 66.8 (2.630”) B 0/-0.20 (0/-.008) 16.4 (.646”) 24.8 (.976”) 38.5 (1.513”) 54.9 (2.161”) 52.5 (2.067”) +0.20/0 (+.008/0) 16.8 (.661”) 25.1 (.988”) 38.8 (1.528”) 55.3 (2.177”) 52.7 (2.075”) +0.25/0 (+.010/0) 8.2 (.323”) 8.2 (.323”) 8.2 (.323”) 8.2 (.323”) 11.0 (.433”) C ±0.10 (±.004) 25.0 (.984”) 33.3 (1.311”) 47.0 (1.850”) 63.5 (2.500”) 61.1 (2.406”) D 0/-0.25 (0/-.010) 8.0 (.315”) 8.0 (.315”) 8.0 (.315”) 8.0 (.315”) 10.9 (.429”) E ±0.20 (±.008) 12.4 (.488”) 12.4 (.488”) 12.4 (.488”) 12.4 (.488”) 15.2 (.598”) F +0.05/-0.20 (+.002/-.008) 11.1 (.437) 11.1 (.437) 11.1 (.437) 11.1 (.437) 11.1 (.437) +0.10/-0.20 (+.004/-.008) 10.9 (.429”) 10.9 (.429”) 11.0 (.433”) 11.0 (.433”) 11.0 (.433”) G +0.10/-0.20 (+.004/-.008) 6.2 (.244”) 6.2 (.244”) 6.2 (.244”) 6.2 (.244”) 6.2 (.244”) ±0.10 (±.004) 5.9 (.232”) 5.9 (.232”) 5.8 (.228”) 5.8 (.228”) 5.8 (.228”) H +0.10/-0.40 (+.004/-.016) 19.4 (.764”) 27.7 (1.091”) 41.4 (1.630”) 57.9 (2.280”) 55.5 (2.185”) J 0/-0.50 (0/-.020) 11.0 (.433”) 11.0 (.433”) 11.0 (.433”) 11.0 (.433”) 13.8 (.543”) Mounting method Front Rear Front Rear Front Rear Front Rear Front Rear A ±0.20 (±.008) 22.2 (.874”) 20.5 (.807”) 30.5 (1.201”) 28.8 (1.134”) 44.3 (1.744”) 42.5 (1.673”) 60.7 (2.390”) 59.1 (2.327”) 58.3 (2.295”) 56.3 (2.217”) E ±0.20 (±.008) 13.0 (.512”) 11.4 (.449”) 13.0 (.512”) 11.4 (.449”) 13.0 (.512”) 11.4 (.449”) 13.0 (.512”) 11.4 (.449”) 15.8 (.622”) 14.1 (.555”) F ±0.20 (±.008) 6.5 (.256”) 5.7 (.224”) 6.5 (.256”) 5.7 (.224”) 6.5 (.256”) 5.7 (.224”) 6.5 (.256”) 5.7 (.224”) 7.9 (.311”) 7.1 (.280”) J ±0.20 (±.008) 2.1 (.083”) 3.4 (.0134”) 2.1 (.083”) 3.4 (.0134”) 2.1 (.083”) 3.4 (.0134”) 2.1 (.083”) 3.4 (.0134”) 2.1 (.083”) 3.4 (.0134”) B ±0.20 (±.008) 11.1 (.437”) 10.2 (.402”) 15.3 (.602”) 14.4 (.567”) 22.1 (.870”) 21.3 (.839”) 30.4 (1.197”) 29.5 (1.161”) 29.2 (1.150”) 28.2 (1.110”) C ±0.20 (±.008) 25.0 (.984”) 33.3 (1.311”) 47.0 (1.850”) 63.5 (2.500”) 61.1 (2.406”) D ±0.20 (±.008) 12.5 (.492”) 16.7 (.657”) 23.5 (.925”) 31.7 (1.248”) 30.6 (1.205”) G ±0.20 (±.008) 3.0 (.118”) 3.0 (.118”) 3.0 (.118”) 3.0 (.118”) 3.0 (.118”) H ±0.20 (±.008) 1.5 (.059”) 1.5 (.059”) 1.5 (.059”) 1.5 (.059”) 1.5 (.059”)

Straight connector footprint TECHNICAL DATA B B B A A A321 Straight contact combinations Arrangement with signal contacts See above dimensions Size 8 and 20 Contacts See above dimensions Size 8 Contacts Power 3.2 mm DIA. (.126”) (20 to 40 A) and signal Power only 3.2 mm DIA. (.126”) (20 to 40 A) Arrangement without signal contacts 3W3 - 5W5 - 8W8 P 3SY P 3Y Power only 2 mm DIA. (.0787”) (10 to 20 A) P 2Y Shielded onlyCY Power 2 mm DIA. (.0787”) (10 to 20 A) and signal Shielded and signal P 2SY CSY Signal only Signal (Size 20) with solder cup terminations Housing preloaded with contacts SY No reference Signal tail 0.6 mm Dia. (.0236”) 1.6 mm (.063”)PCB For other PCB thickness: consult factory.

Description

Power (.126” tail dia.) 1 Power (.0787” tail dia.) 1 Shielded 3 Signal 2 a 4.80 mm (.198”) 4.80 mm (.198”) 4.00 mm (.157”) 5.00 mm (.196”) b 7.2 mm (.283”) 7.2 mm (.283”) 7.2 mm (.283”) 11.50 mm (.453”) Dimensions

Right angle connector footprint Right angle contacts combinations TECHNICAL DATATW / E1 Arrangement with signal contacts Note: above dimensions correpond to sizes E to C. Consult factory for D sizes. Connector comes equiped with contacts and brackets. Arrangement without signal contacts 3W3 - 5W5 - 8W8 European Mixed MIL (U.S.) Size 8 and footprint footprint footprint 20 Contacts Power 3.2 mm EP3SV HP3SV MP3SV DIA. (.126”) (20 to

40 A) and signal

EP2SV HP2SV MP2SV DIA. (.0787”) (10 to

20 A) and signal

• HCSV MCSV Shielded and signal ESV HSV MSV Signal only European Mixed MIL (U.S.) Size 8 contacts footprint footprint footprint only Power only EP3V HP3V MP3V 3.2 mm DIA. (.126”) (20 to 40 A) Power only EP2V HP2V MP2V 2.0 mm DIA. (.0787”) (10 to 20 A) - HCV MCV Shielded only C B A C CB B A A 1 2 3

Power (.0787” tail dia.) 3 Power (.126” tail dia.) 3 Europe HE 5 pattern = - Europ. height - Europ. footprint pitch between 2 rows: .100” Mix Mixed pattern = - MIL height - Europ. footprint pitch between 2 rows: .100” MIL MIL pattern = - MIL height - MIL footprint pitch between 2 rows: .112” a 10.30mm (.406”) 11.57mm (.456”) 21.46mm (.845”) b 7.20mm (.283”) 7.20mm (.283”) 7.20mm (.283”) c 11.20mm (.441”) 10.50mm (.413”) 10.50mm (.413”) a 10.30mm (.406”) 10.30mm (.406”) 11.57mm (.456”) 21.46mm (.845”) b 6.30mm (.248”) 6.30mm (.248”) 6.30mm (.248”) 6.30mm (.248”) c 10.00mm (.394”) 9.50mm (.374”) 9.50mm (.374”) 9.50mm (.374”) a 10.30mm (.406”) 8.10mm (.319”) 9.52mm (.375”) 21.46mm (.845”) b 6.30mm (.248”) 6.30mm (.248”) 6.30mm (.248”) 6.30mm (.248”) c 10.00mm (.394”) 9.50mm (.374”) 9.50mm (.374”) 9.50mm (.374”) Signal tail 0.6 mm Dia. (.0236”) 1.6 mm (.063”) PCB For other PCB thickness: consult factory.

Connectors come equiped with metal brackets Straight version Straight and right angle version BLANK: 3.10mm (.122”) dia mounting hole BLANK: 3.10mm (.122”) dia mounting hole A514: blind mating system FM: float mounting system RM6: metal brackets + boardlock RM54: RM5 4.40 threaded RM53: RM5 M3 threaded RM84: RM8 4.40 threaded RM83: RM8 M3 threaded 4F: 4.40 front female screwlock 3F: M3 front female screwlock 4R: 4.40 rear nut 3R: M3 rear nut Metal bracket RM6 1.5 max.ø3 (.118) (.137) (.783) 3.5 (.141 max.) 3.6 max. ø2.2 (.086) ø2.25 (.088) 3.4 (.134) 19.9 + 0.25 (.059 max.) 7.2 (.283) RM8 RM5 7.1 (.279)

4.80 (.189”) 4.80 (.189”) (.866”) (.866”) (.622”) øA øB øA øB 5.20 (.205”) 5.20 (.205”) Plug L 17DM 53745-8 L 17DM 53745-7 L 17DM 53745-1 Socket L 17DM 53744-7 L 17DM 53744-6 L 17DM 53744-1 Current 10 to 20 Amp. 20 to 30 Amp. 30 to 40 Amp. A mm (inch) 1.80 (.071”) 2.80 (.110”) 4.80 (.189”) B mm (inch) 2.55 (.100”) 3.70 (.145”) 5.60 (.220”) Trim dimensions: 7.5 mm (.295”) P/N Dimensions (.866”) (.866”)øA øB øA øB Plug L 17DM 53745-208 L 17DM 53745-207 L 17DM 53745-201 Socket L 17DM 53744-207 L 17DM 53744-206 L 17DM 53744-201 Current 10 to 20 Amp. 20 to 30 Amp. 30 to 40 Amp. A mm (inch) 1.80 (.071”) 2.80 (.110”) 4.80 (.189”) B mm (inch) 2.55 (.100”) 3.70 (.145”) 5.60 (.220”) Trim dimensions: 7.5 mm (.295”) Crimping tool for all sizes L17D479SP Extraction tool for sizes 8 cts P/N Dimensions (.622”)

B øD B øD A E G F Straight shielded contacts TECHNICAL DATA Straight shielded contacts Crimp ferrule and inner solder Ferrule and inner solder B øD B øD A E G F Type plug plug plug plug socket socket socket socket P/N L17DM 53740 L17DM 53740-1 L17DM 53740-3 L17DM 53740-5 L17DM 53742 L17DM 53742-1 L17DM 53742-3 L17DM 53742-5 B 23.6 (.929”) 23.6 (.929”) 23.6 (.929”) 23.6 (.929”) 23.6 (.929”) 23.6 (.929”) 23.6 (.929”) 23.6 (.929”) F 6.3 (.248”) 6.3 (.248”) 7.9 (.311”) 7.9 (.311”) 6.3 (.248”) 6.3 (.248”) 7.9 (.311”) 7.9 (.311”) D 1.0 (.039”) 1.7 (.066”) 2.8 (.110”) 3.2 (.126”) 1.0 (.039”) 1.7 (.066”) 2.8 (.110”) 3.2 (.126”) Cable - RG

178 B/U

179 B/U 316 B/U

180 B/U

58 C/U

Dimensions (inch) A Max 18.8 (740”) 18.8 (740”) 21.5 (846”) 21.5 (846”) 18.8 (740”) 18.8 (740”) 21.5 (846”) 21.5 (846”) Trim dimensions (inch) E 7.9 (.311”) 7.9 (.311”) 9.5 (.374”) 9.5 (.374”) 7.9 (.311”) 7.9 (.311”) 9.5 (.374”) 9.5 (.374”) G 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) Dimensions (inch) Trim dimensions (inch)Type short plug plug plug plug plug short socket socket socket socket socket P/N L17DM 53740-5000 L17DM 53740-5001 L17DM 53740-5002 L17DM 53740-5005 L17DM 53740-5008 L17DM 53742-5000 L17DM 53742-5001 L17DM 53742-5002 L17DM 53742-5004 L17DM 53742-50060 A Max 17.0 (669”) 18.8 (740”) 21.5 (846”) 21.5 (846”) 18.8 (740”) 17.0 (669”) 18.8 (740”) 21.5 (846”) 21.5 (846”) 18.8 (740”) B 21.8 (.858”) 23.6 (.929”) 26.3 (1.035”) 26.3 (1.035”) 23.6 (.929”) 21.8 (.858”) 23.6 (.929”) 26.3 (1.035”) 26.3 (1.035”) 23.6 (.929”) D 1.0 (.039”) 1.7 (.066”) 2.8 (.110”) 3.2 (.126”) 1.0 (.039”) 1.0 (.039”) 1.7 (.066”) 2.8 (.110”) 3.2 (.126”) 1.0 (.039”) Cable - RG E 7.9 (.311”) 7.9 (.311”) 9.5 (.374”) 9.5 (.374”) 7.9 (.311”) 7.9 (.311”) 7.9 (.311”) 9.5 (.374”) 9.5 (.374”) 7.9 (.311”) F 6.3 (.248”) 6.3 (.248”) 7.9 (.311”) 7.9 (.311”) 6.3 (.248”) 6.3 (.248”) 6.3 (.248”) 7.9 (.311”) 7.9 (.311”) 6.3 (.248”) G 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”) 2 (.078”)

Right angled shielded contact Crimping tool Extraction tool TECHNICAL DATATW / E1 Crimp ferrule and inner solder Ferrule and inner solder Hand crimp tool Extraction tool for sizes 8 cts L17D429SP A F E G A B C øD F E G B C øD 227-0944 (without dies) (M 22 520/5-01) Dimensions (inch) Trim dimensions (inch)Type plug plug plug plug socket socket socket socket P/N L17DM 53741 L17DM 53741-1 L17DM 53741-3 L17DM 53741-4 L17DM 53743-2 L17DM 53743-3 L17DM 53743-5 L17DM 53743-6 Cable - RG 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) B 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) D 1.0 (.039”) 1.7 (.066”) 2.8 (.110”) 3.2 (.126”) 1.0 (.039”) 1.7 (.066”) 2.8 (.110”) 3.2 (.126”) E 9.5 (.374”) 9.5 (.374”) 10.7 (.421”) 10.7 (.421”) 9.5 (.374”) 9.5 (.374”) 10.7 (.421”) 10.7 (.421”) F 5.9 (.232”) 5.9 (.232”) 7.9 (.311”) 7.9 (.311”) 5.9 (.232”) 5.9 (.232”) 7.9 (.311”) 7.9 (.311”) G 1.6 (.062”) 1.6 (.062”) 2.4 (.094”) 2.4 (.094”) 1.6 (.062”) 1.6 (.062”) 2.4 (.094”) 2.4 (.094”) Dimensions (inch) Trim dimensions (inch)Type plug plug plug plug socket socket socket socket P/N L17DM 53741-5000 L17DM 53741-5001 L17DM 53741-5003 L17DM 53741-5004 L17DM 53743-5000 L17DM 53743-5001 L17DM 53743-5003 L17DM 53743-5004 B 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) 18.6 (.732”) G 1.6 (.062”) 1.6 (.062”) 2.4 (.094”) 2.4 (.094”) 1.6 (.062”) 1.6 (.062”) 2.4 (.094”) 2.4 (.094”) D 1.0 (.039”) 1.7 (.066”) 2.8 (.110”) 3.2 (.126”) 1.0 (.039”) 1.7 (.066”) 2.8 (.110”) 3.2 (.126”) Cable - RG 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) 13.5 (.531”) E 9.5 (.374”) 9.5 (.374”) 10.7 (.421”) 10.7 (.421”) 9.5 (.374”) 9.5 (.374”) 10.7 (.421”) 10.7 (.421”) F 5.9 (.232”) 5.9 (.232”) 7.9 (.311”) 7.9 (.311”) 5.9 (.232”) 5.9 (.232”) 7.9 (.311”) 7.9 (.311”) dim. between 2 flat surfaceRG cables RG 58 C/U RG 178 B/U RG 179 B/U RG 180 B/U MIL reference M 22 520/5-05 M 22 520/5-03 M 22 520/5-03 M 22 520/5-05 Amphenol P/N 227 1221-05 227 1221-03 227 1221-03 227 1221-05 cavity A 5.41 3.25 cavity B 2.67 4.52

Cabling instructions for shielded contacts ASSEMBLY INSTRUCTIONS Straight crimp shielded contacts: Right angle crimp shielded contacts: Solder straight shielded contacts: Solder right angle shielded contacts: inner solder contact outer crimp contact inner solder contact outer crimp contact soft solder coaxial shellouter ring outer ring braided shield inner sleeve soft solder coaxial shellouter ring outer ring solderbraided shield inner sleeve crimp 3.20 soft solder coaxial shellouter ring outer ring inner sleeve crimp 3.20 Assembly method - Slide the outer ring over the cable jacket. Trim the cable according to the recommended dimensions. - Insert the cable dielectric and the center conductor inside the inner sleeve. - Solder the central conductor to the shielded center contacts. - Slide the outer ring towards the inner sleeve ans recover the braid. - Using crimp hand tool equipped with the appropriate dies, crimp in the area defined. soft solder cap into shell after cable assembly on 90˚ type coaxes solder soft solder coaxial shell outer ring outer ringinner sleeve soft solder cap into shell after cable assembly on 90˚ type coaxes Assembly method - Slide the outer ring over the cable jacket. Trim the cable according to the recommended dimensions. - Insert the cable dielectric and the center conductor inside the inner sleeve. - Solder the central conductor to the shielded center contacts. - Slide the outer ring towards the inner sleeve ans recover the braid. - Solder by introducing metal through the outer ring hole.

How to build your part number HOW TO ORDERTW / E1 Contacts and Shell Contact Plating Shell Tinned Tinned & Indents; Plug only 0.4µm(16µ”) Au 77 717 0.76µm(30µ”) Au 177 777 Shell size and Configuration: E5W1, A3W3, A7W2, A11W1, B5W5, B9W4, B13W3, B17W2, B21W1, C8W8, C13W6, C17W5, C21WA4 C25W3, C27W2, D24W7, D36W4, D43W2 RoHS Compliant Gender: P: Pin S: Socket For right angle MP3SV: US Footprint, 20-40 Amp power & signal mix MP2SV: US Footprint, 10-20 Amp power & signal mix MCSV: US Footprint, Coax & signal mix MSV: US Footprint, Signal only MP3V: US Footprint, 20-40 Amp power only (3W3, 5W5, 8W8) MP2V: US Footprint, 10-20 Amp power only (3W3, 5W5, 8W8) MCV: US Footprint, Coax only (3W3, 5W5, 8W8) EP3SV: European Footprint, 20-40 Amp power & signal mix EP2SV: European Footprint, 10-20 Amp power & signal mix Contacts: For straight BLANK: Solder-cup signal contacts only P3SY: 20-40 Amp power & signal mix P2SY: 10-20 Amp power & signal mix CSY: Coax & signal mix SY: Signal only P3Y: 20-40 Amp power only (3W3, 5W5, 8W8) P2Y: 10-20 Amp power only (3W3, 5W5, 8W8) CY: Coax only (3W3, 5W5, 8W8) ESV: European Footprint, Signal only EP3V: European Footprint, 20-40 Amp power only (3W3, 5W5, 8W8) EP2V: European Footprint, 10-20 Amp power only (3W3, 5W5, 8W8) HP3SV: Mixed Footprint, 20-40 Amp power & signal mix HP2SV: Mixed Footprint, 10-20 Amp power & signal mix HCSV: Mixed Footprint, Coax & signal mix HSV: Mixed Footprint, Signal only HP3V: Mixed Footprint, 20-40 Amp power only (3W3, 5W5, 8W8) HP2V: Mixed Footprint, 10-20 Amp power only (3W3, 5W5, 8W8) HCV: Mixed Footprint, Coax only (3W3, 5W5, 8W8) Panel Mounting Options For right angle & cable mount Blank: .120”(3.05mm) Clear Hole 3F: M3 Front Screwlock 3R: M3 Rear Threaded Insert 4F: #4-40 Front Screwlock 4R: #4-40 Threaded Rear Insert FM: Float mount system A514: Blind Mate Guide Pin Board Mounting Options For Straight Blank: .120”(3.05mm) Clear Hole RM53: M3 Threaded (panel side) standoff with boarlock RM54: 4-40UNC Threaded (panel side) standoff with boardlock RM84: Non-Removable M3 screwlock, with standoff and boardlock For Right Angle RM6: Metal bracket with boardlocks Special Deviations Please consult factory

Do not hesitate to contact us for further information Amphenol IT & Communication Products Block A3/A4, The 4th Industrial District of Industrial Headquarters, Dong Keng Road Gong Ming Town, Shen Zhen China Fax:+86(0)755 2754 9955 Technical Support Tel:+86(0)755 2717 7945 Info-dsub@amphenol.com.cn http://www.dsubconnector.com The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.E13/B NOTES Memo