L14P1 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

0.038 (0.97) 0.100 (2.54) 0.050 (1.27) 45° 0.046 (1.16) 0.036 (0.92) 0.030 (0.76) NOM 0.195 (4.95) 0.178 (4.52) 0.230 (5.84) 0.209 (5.31) 0.500 (12.7) MIN 0.255 (6.47) 0.225 (5.71) Ø0.020 (0.51) 3X PACKAGE DIMENSIONS

FEATURES

  • Hermetically sealed package
  • Narrow reception angle
  • Devices can be used as a photodiode by wiring the collector and base leads. NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified.

DESCRIPTION

The L14P1/L14P2 are silicon phototransistors mounted in a narrow angle, TO-18 package.  2001 Fairchild Semiconductor Corporation DS300309 6/01/01 1 OF 4 www.fairchildsemi.com EMITTER (CONNECTED TO CASE) COLLECTOR BASE 2 SCHEMATIC HERMETIC SILICON PHOTOTRANSISTOR L14P1 L14P2

www.fairchildsemi.com 2 OF 4 6/01/01 DS300309 PARAMETER TEST CONDITIONS SYMBOL MIN TYP MAX UNITS Collector-Emitter Breakdown I C = 10 mA, Ee = 0 BV CEO 30 — V Emitter-Base Breakdown I E = 100 µA, Ee = 0 BV EBO 5.0 — V Collector-Base Breakdown I C = 100 µA, Ee = 0 BV CBO 40 — V Collector-Emitter Leakage V CE = 12 V, Ee = 0 I CEO — 100 nA Reception Angle at 1/2 Sensitivity θ ±8 Degrees On-State Collector Current L14P1 Ee = 0.5 mW/cm2, VCE = 5 V(7,8) IC(ON) 6.5 — mA On-State Collector Current L14P2 Ee = 0.5 mW/cm2, VCE = 5 V(7,8) IC(ON) 13.0 mA On-State Photodiode Current Ee = 0.3 mW/cm2, VCB = 5 V ICB(ON) 6.0 µA Rise Time IC = 10 mA, VCC = 5 V, RL =100 Ω tr 10 µs Fall Time IC = 10 mA, VCC = 5 V, RL =100 Ω tf 12 µs Saturation Voltage L14P1 IC = 0.8 mA, Ee = 0.6 mW/cm2(7,8) VCE(SAT) — 0.40 V Saturation Voltage L14P2 IC = 1.6 mA, Ee = 0.6 mW/cm2(7,8) VCE(SAT) — 0.40 V ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) (All measurements made under pulse conditions) Parameter Symbol Rating Unit Operating Temperature T OPR -65 to +125 °C Storage Temperature T STG -65 to +150 °C Soldering Temperature (Iron)(3,4,5 and 6) TSOL-I 240 for 5 sec °C Soldering Temperature (Flow)(3,4 and 6) TSOL-F 260 for 10 sec °C Collector to Emitter Breakdown Voltage VCEO 30 V Collector to Base Breakdown Voltage V CBO 40 V Emitter to Base Breakdwon Voltage V EBO 5V Power Dissipation (TA = 25°C)(1) PD 300 mW Power Dissipation (TC = 25°C)(2) PD 600 mW ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) NOTE: 1. Derate power dissipation linearly 3.00 mW/°C above 25°C ambient. 2. Derate power dissipation linearly 6.00 mW/°C above 25°C case. 3. RMA flux is recommended. 4. Methanol or isopropyl alcohols are recommended as cleaning agents. 5. Soldering iron tip 1/16”(1.6mm) minimum from housing. 6. As long as leads are not under any stress or spring tension. 7. Light source is a GaAs LED emitting light at a peak wavelength of 940 nm. 8. Figure 1 and figure 2 use light source of tungsten lamp at 2870°K color temperature. A GaAs source of 3.0 mW/cm 2 is approximately equivalent to a tungsten source, at 2870°K, of 10 mW/cm2. HERMETIC SILICON PHOTOTRANSISTOR L14P1 L14P2

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. DS300309 6/01/01 4 OF 4 www.fairchildsemi.com HERMETIC SILICON PHOTOTRANSISTOR L14P1 L14P2