DS209 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 20

Technical content

DS209 LUXEON 3020 Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT LUXEON 3020 is the first and only hot-color targeted EMC-based 3.0mm x 2.0mm QFN, delivering superior efficacy with superior lumen maintenance and assurance of ANSI color compliance at operating conditions—85°C. Lumileds enables mass production of affordable and reliable bulbs and lamps by simplifying system designs and integration with leading lm/$ and hot-color targeting. Features and BeneFIts PrImary aPPlIcatIons High efficacy delivers superior lumen maintenance Architectural Reliable QFN EMC package delivers superior thermal properties and reliability Downlights 1/9th ANSI micro-color binning enables tight color control Indoor Area Lighting Hot-color targeted at 85°C which leads to better color accuracy – Troffer Drive at max current for superior value – TLED Lamps Specialty Lighting luXeon 3020 Industry’s most compact, highest drive current 3V mid power LED

DS209 LUXEON 3020 Product Datasheet 20170307 ©2017 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS209 LUXEON 3020 Product Datasheet 20170307 ©2017 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON 3020 LEDs are tested with a 20ms monopulse of 120mA at junction temperature, Tj, of 25ºC. Forward voltage and luminous flux are binned at a Tj of 25°C, while color is hot targeted at a Tj of 85°C. Part Number Nomenclature Part numbers for LUXEON 3020 follow the convention below: L 1 3 0 – A A B B 0 0 2 0 1 1 0 0 1 Where: A A – designates nominal CCT (22=2200K, 25=2500K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K) B B – designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI) Therefore, the following part number is used for a LUXEON 3020 3000K 80CRI: L 1 3 0 – 3 0 8 0 0 0 2 0 1 1 0 0 1 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long- term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3020 is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

Table 1. Product performance of LUXEON 3020 at 120mA and 100mA at specified temperature.

  1. Correlated color temperature is hot targeted at Tj=85°C.
  2. Luminous flux and CRI are based upon mounted package on highly reflective surface at Tj=25°. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this
  3. Lumileds maintains a tolerance of ±2 on CRI and ±7.5% on luminous flux measurements.

Table 2 . Optical characteristics for LUXEON 3020 at 120mA, T j=25ºC .

  1. Total angle at which 90% of total luminous flux is captured.
  2. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.

DS209 LUXEON 3020 Product Datasheet 20170307 ©2017 Lumileds Holding B.V. All rights reserved. 4 Electrical and Thermal Characteristics Table 3 . Electrical and thermal characteristics for LUXEON 3020 at 120mA, T j=25ºC . Part numBer ForWard Voltage (V f) [1] tyPIcal temPerature coeFFIcIent oF ForWard Voltage (mV/°c) [2] tyPIcal thermal resIstance—JunctIon to solder Pad (°c/W)mInImum tyPIcal maXImum Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements. 2. Measured between 25°C and 85°C. Absolute Maximum Ratings Table 4 . Absolute maximum ratings for LUXEON 3020 . Parameter maXImum PerFormance DC Forward Current [1, 2] 240mA Peak Pulsed Forward Current [1, 3] 300mA LED Junction Temperature [1] (DC & Pulse) 125°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2 Operating Case Temperature [1, 2] -40°C to 105°C LED Storage Temperature -40°C to 105°C Soldering Temperature JEDEC 020D 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) [4] -10V Notes for 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Ripple current with a frequency of 50–150Hz is allowed as long as the average of the current waveform is below 240mA and the maximum of the current waveform is lower than 300mA. 3. At 10% duty cycle and pulse width <100μS. 4. At maximum reverse current of 10μA.

DS209 LUXEON 3020 Product Datasheet 20170307 ©2017 Lumileds Holding B.V. All rights reserved. 8 Figure 6 . Typical polar radiation pattern for LUXEON 3020 at 120mA, T j=25ºC .

dominant wavelength and forward voltage. availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON 3020 at 120mA, T j=25°C .

  1. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements.

Table 7. Forward voltage bin definitions for LUXEON 3020, T j=25°C .

  1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
  2. Drawings are not to scale.
  3. All dimensions are in millimeters.

Figure 9 . Mechanical dimensions for LUXEON 3020 .

Table 8. Reflow profile characteristics for LUXEON 3020.

  1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.

Table 9 . Moisture sensitivity levels for LUXEON 3020 . Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 8.

DS209 LUXEON 3020 Product Datasheet 20170307 ©2017 Lumileds Holding B.V. All rights reserved. 18 Reel Dimensions Notes for Figure 13: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 13 . Reel dimensions for LUXEON 3020 .

Product Datasheet 20170307 ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com.