DS208 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 25

Technical content

DS208 LUXEON 3014 Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT No. E352519 LUXEON 3014 is an industry standard compatible footprint for ease of installation into existing 3014 sockets and stays consistent with a 3.0mm x 1.4mm x 0.75mm package. LUXEON 3014 is hot-color targeted at operating conditions—65°C. This low power device is an ideal choice when uniformity and reduction in spottiness is necessary for indoor designs. luXEon 3014 Hot-color targeted industry standard package for uniform light FEaturEs and BEnEFIts PrImary aPPlIcatIons Industry standard footprint and package offering compatibility with existing designs Indoor Area Lighting 1/9th ANSI micro-color binning enables tight color control Lamps Hot-color targeted at 65°C which leads to better color accuracy Specialty Lighting Rectangular package design allows for increased uniformity – Monochrome LED Drive at maximum current, 120mA for superior value – Channel Lighting – Signage

DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON 3014 LEDs are tested with a 20ms monopulse of 60mA at a junction temperature,Tj, of 25°C. Forward voltage and luminous flux are binned at a Tj of 25°C, while color is hot targeted at a Tj of 65°C. Part Number Nomenclature Part numbers for LUXEON 3014 follow the convention below: L 1 3 0 – A A B B Y Y 1 4 0 0 0 0 C Where: A A – designates nominal CCT (22=2200K, 25=2500K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K, 80=8000K, 10=10000K) B B – designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI) Y Y – designates platform (HE=new generation for 80CRI, 00=previous generation) C – designates Lumileds internal code (1 is full distribution base part; 2, 3, etc.=shares the same base part) Therefore, the following part number is used for a new generation LUXEON 3014 3000K 80CRI: L 1 3 0 – 3 0 8 0 H E 1 4 0 0 0 0 C Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long- term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3014 is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved. 3 Performance Characteristics Product Selection Guide Table 1 . Product performance of LUXEON 3014 at 60mA and 30mA at test temperature . nomInal cct [1] mInImum crI [2, 3, 4] lumInous FluX [3] (lm) tyPIcal lumInous EFFIcacy (lm/W) tyPIcal lumInous FluX (lm) tyPIcal lumInous EFFIcacy (lm/W) Part numBErmInImum tyPIcal 60ma 30ma 8000K 70 25 28 150 15 172 L130-8070001400001 10000K 70 23 27 145 14 166 L130-1070001400001 2200K 80 19 22 118 12 135 L130-2280HE1400001 2500K 80 21 24 129 12 148 L130-2580HE1400001 2700K 80 23 26 140 13 161 L130-2780HE1400001 3000K 80 23 26 140 13 161 L130-3080HE1400001 3500K 80 23 26 140 13 161 L130-3580HE1400001 4000K 80 25 28 150 15 172 L130-4080HE1400001 5000K 80 25 28 150 15 172 L130-5080HE1400001 5700K 80 25 28 150 15 172 L130-5780HE1400001 6500K 80 25 27 145 15 166 L130-6580HE1400001 2200K 90 16 18 97 9 99 L130-2290001400001 2700K 90 18 20 102 11 118 L130-2790001400001 3000K 90 19 20 102 11 118 L130-3090001400001 3500K 90 19 22 113 12 129 L130-3590001400001 4000K 90 20 23 113 12 129 L130-4090001400001 5000K 90 20 23 118 13 140 L130-5090001400001 5700K 90 20 23 118 13 140 L130-5790001400001 6500K 90 20 23 113 12 129 L130-6590001400001 Notes for Table 1: 1. Correlated color temperature is hot targeted at Tj=65°C. 2. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 3. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 4. For 90CRI products, R9≥50. Optical Characteristics Table 2 . Optical characteristics for LUXEON 3014 at 60mA, T j=25°C . Part numBEr tyPIcal total IncludEd anglE [1] tyPIcal VIEWIng anglE [2] L130-xxxxxx1400001 140° 116° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved. 4 Electrical and Thermal Characteristics Table 3 . Electrical and thermal characteristics for LUXEON 3014 at 60mA, T j=25ºC . Part numBEr ForWard VoltagE [1] (V) tyPIcal tEmPEraturE coEFFIcIEnt oF ForWard VoltagE (mV/°c) [2] tyPIcal thErmal rEsIstancE—JunctIon to soldEr Pad (°c/W)mInImum tyPIcal maXImum Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements. 2. Measured between 25°C and 85°C. Absolute Maximum Ratings Table 4 . Absolute maximum ratings for LUXEON 3014 . ParamEtEr maXImum PErFormancE DC Forward Current [1,2] 120mA Peak Pulsed Forward Current [1,3] 150mA LED Junction Temperature [1] (DC & Pulse) 115°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2 Operating Case Temperature [1] -40°C to 105°C LED Storage Temperature -40°C to 100°C Soldering Temperature JEDEC 020D 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) -5V Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current 3. At 10% duty cycle with pulse width of 10ms.

dominant wavelength and forward voltage. a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON 3014 at 60mA, T j=25°C .

  1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.

Table 7. Forward voltage bin definitions for LUXEON 3014 at 60mA, T j=25°C .

  1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
  2. Drawings are not to scale.
  3. All dimensions are in millimeters.

Figure 8 . Mechanical dimensions for LUXEON 3014 .

Table 8. Reflow profile characteristics for LUXEON 3014. Table 9 . Moisture sensitivity levels for LUXEON 3014 . Figure 9. Visualization of the acceptable reflow temperature profile as specified in Table 8.

DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved. 23 Notes for Figure 17b — Shipment box label descriptions for customer use: All other field labels not described are for Lumileds internal use only. 1. Lumileds part number. 2. Customer part number for custom requests only. 3. Total number of LED emitters in a shipment box. 4. Maximum of 10 reels printed per label. For example, if there are 21 reels in a shipment box, there will be 3 labels printed. 5. Lumileds product name. Figure 17b . Example of shipment box label format B .

Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com.