DS215 LUMILEDS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 20

Technical content

No. E352519 DS215 LUXEON 3030 HV Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. LUXEON 3030 HV is an industry standard package to optimize total voltage output, available in 24V and 48V. This high voltage at low current architecture allows system design freedom and is compatible with more efficient and cost effective drivers. This mid power LED is 1/9 th micro-color binned for tight color control and hot-color targeted to ensure that the LEDs are within color target at application conditions—85°C. LUXEON 3030 HV delivers efficacy and reliability for a variety of applications such as downlights, lamps and spotlights. luXEon 3030 HV High flux, hot-color targeted, 24V and 48V mid power packages FEaturEs and BEnEFIts PrImary aPPlIcatIons High voltage at low current, compatible with more efficient and cost effective drivers Downlights 24V and 48V options available to optimize total voltage output Lamps 1/9th micro color binning and 85°C hot-color targeting enables tight color control Spotlights EMC based package affirms lumen maintenance and long lifetime

DS215 LUXEON 3030 HV Product Datasheet 20170110 ©2017 Lumileds Holding B.V. All rights reserved. i Table of Contents

DS215 LUXEON 3030 HV Product Datasheet 20170110 ©2017 Lumileds Holding B.V. All rights reserved. 2 General Product Information Product Test Conditions LUXEON 3030 HV LEDs are tested with a 20ms monopulse of 34mA for LUXEON 3030 HV 24V and 17mA for LUXEON 3030 HV 48V parts at a junction temperature,Tj, of 25°C. Forward voltage and luminous flux are binned at a Tj of 25°C, while color is hot targeted at a Tj of 85°C. Part Number Nomenclature Part numbers for LUXEON 3030 HV follow the convention below: L 1 3 0 – A A B B C C H V 0 0 0 0 1 Where: A A – designates nominal CCT (27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K) B B – designates minimum CRI (80=80CRI, 90=90CRI) C C – designates voltage (0B=24V and 0C=48V) Therefore, the following part number is used for a LUXEON 3030 HV 3000K 80CRI 24V: L 1 3 0 – 3 0 8 0 0 B H V 0 0 0 0 1 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long- term performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3030 HV is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

Table 1. Product performance of LUXEON 3030 HV at specified test current and temperature.

  1. Correlated color temperature is hot targeted at Tj=85°C.
  2. Luminous flux and CRI specs are based upon mounted package on highly reflective surface at Tj=25°C. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is
  3. Lumileds maintains a tolerance of ±2 on CRI and ±7.5% on luminous flux measurements.

Table 2 . Optical characteristics for LUXEON 3030 HV at test current, T j=25°C .

  1. Total angle at which 90% of total luminous flux is captured.
  2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

DS215 LUXEON 3030 HV Product Datasheet 20170110 ©2017 Lumileds Holding B.V. All rights reserved. 4 Electrical and Thermal Characteristics Table 3 . Electrical and thermal characteristics for LUXEON 3030 HV at test current, T j=25°C . Part numBEr ForWard VoltaGE [1] (Vf) tyPIcal tEmPEraturE coEFFIcIEnt oF ForWard VoltaGE [2] (mV/°c) tyPIcal tHErmal rEsIstancE — JunctIon to soldEr Pad (°c/W)mInImum tyPIcal maXImum L130- XXXXXBHV00001 22.5 24.0 25.0 -13 12 L130- XXXXXCHV00001 45.0 48.0 50.0 -26 12 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements. 2. Measured between 25°C and 85°C. Absolute Maximum Ratings Table 4 . Absolute maximum ratings for LUXEON 3030 HV . ParamEtEr maXImum PErFormancE DC Forward Current [1,2] 60mA for L130-xxxx0BHV00001 30mA for L130-xxxx0CHV00001 Peak Pulsed Forward Current [1,3] 80mA for L130-xxxx0BHV00001 40mA for L130-xxxx0CHV00001 LED Junction Temperature [1] (DC & Pulse) 125°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2 Operating Case Temperature [1] -40°C to 105°C LED Storage Temperature -40°C to 105°C Soldering Temperature JEDEC 020D 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed 25% of the maximum allowable DC forward current 3. Pulsed operation with the maximum peak pulsed forward current is acceptable if the pulse duty cycle is ≤10%.

DS215 LUXEON 3030 HV Product Datasheet 20170110 ©2017 Lumileds Holding B.V. All rights reserved. 7 Figure 3b. Typical normalized light output vs. forward current for L130-XXXX0CHV00001 at T j=25°C .

dominant wavelength and forward voltage. in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON 3030 HV at test current, T j=25°C .

  1. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements.

Table 7. Forward voltage bin definitions for LUXEON 3030 HV at test current, T j=25°C .

  1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
  2. Drawings are not to scale.
  3. All dimensions are in millimeters.

Figure 9. Mechanical dimensions for LUXEON 3030 HV.

Table 8. Reflow profile characteristics for LUXEON 3030 HV. Table 9. Moisture sensitivity levels for LUXEON 3030 HV. Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 8.

DS215 LUXEON 3030 HV Product Datasheet 20170110 ©2017 Lumileds Holding B.V. All rights reserved. 18 Reel Dimensions Notes for Figure 13: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 13 . Reel dimensions for LUXEON 3030 HV .

Product Datasheet 20170110 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com. ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com