L1186L-XX-S08-B-T

L1186_1112 UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

UNISONIC TECHNOLOGIES CO., LTD L1186 CMOS IC www.unisonic.com.tw 1 of 7 Copyright © 2011 Unisonic Technologies Co., Ltd QW-R502-319.F 600mA CMOS LDO „ DESCRIPTION The UTC L1186 is a COMS positive linear regulator. One of its features is the very low quiesc ent current typical as low as 30 μA and its dropout voltage is extremely low with 600mA output current. The internal circuit includes thermal shutdown and current fold-back to prevent device failure when the circuit is operated in the bad conditions. In application, the UTC L1186 needs a low noise, regulated supply. For stable operation, the output capacitance value should be 2.2μF or more. The UTC L1186 is an ideal for battery applications, such as instrumentations, portable electron ics, wireless devices, cordless phones, PC peripherals, and battery powered widgets. „ FEATURES * Accurate to Within 1.5% * Quiescent Current: 30μA * Internal Over-Temperature Shutdown * With Current Limiting * Internal Short Circuit Current Fold-Back * With Noise Reduction Bypass Capacitor * Has Power-Saving Shutdown Mode * Very Low Temperature Coefficient SOT-25 SOP-8 „ ORDERING INFORMATION Ordering Number Package Packing Lead Free Halogen Free L1186L-xx-AF5-R L1186G-xx-AF5-R SOT-25 Tape Reel L1186L-xx-S08-A-R L1186G-xx-S08-A-R SOP-8 Tape Reel L1186L-xx-S08-A-T L1186G-xx-S08-A-T SOP-8 Tube L1186L-xx-S08-B-R L1186G-xx-S08-B-R SOP-8 Tape Reel L1186L-xx-S08-B-T L1186G-xx-S08-B-T SOP-8 Tube Note: xx: Output Voltage, refer to Marking Information.

UNISONIC TECHNOLOGIES CO., LTD 2 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 3 1 9 . F „ MARKING INFORMATION PACKAGE VOLTAGE CODE MARKING SOT-25 15 :1.5V 28 :2.8V AD:ADJ 321 5 4 Voltage Code L: Lead Free G: Halogen FreeLSXX SOP-8 „ PIN CONFIGURATION EN GND VIN VOUT BYP/ADJ SOT-25 SOP-8(A) SOP-8(B) „ PIN DESCRIPTION PIN NO PIN NAME DESCRIPTION SOT-25 SOP-8(A) SOP-8(B) 1 1 8 V IN Input for voltage input. 2 2,3,6,7 3 GND Ground. 3 4 5 EN Enable pin. 4 5 2 BYP/ADJ Noise Reduction Bypa ss Capacitor/ Adjusted Voltage 5 8 1 V OUT Output voltage pin 4,6,7 NC No connection

UNISONIC TECHNOLOGIES CO., LTD 3 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 3 1 9 . F „ BLOCK DIAGRAM

UNISONIC TECHNOLOGIES CO., LTD 4 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 3 1 9 . F „ ABSOLUTE MAXIMUM RATING (TA = 25°C, unless otherwise specified.) PARAMETER SYMBOL RATINGS UNIT Input Voltage V IN 8 V Output Voltage V OUT GND-0.3 ~ V IN+0.3 V Output Current I OUT OUTIN D V-V P A Power Dissipation SOT-25 PD 400 mW SOP-8 600 Junction Temperature T J 150 °C Operating Temperature T OPR -40~+85 °C Storage Temperature T STG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. „ THERMAL DATA PARAMETER SYMBOL RATINGS UNIT Junction to Ambient SOT-25 θJA 260 °C/W SOP-8 200 Junction to Case (Note) SOT-25 θJC 81 °C/W SOP-8 65 Note: θJC on center of molding compound if IC has on tab „ ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified.) Fixed Voltage PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Input Voltage V IN Note1 7 V Output Voltage Accuracy V OUT I OUT=1mA -1.5 1.5 % Line Regulation OUT OUT V VΔ IOUT=1mA VIN=VOUT+1~VOUT+2 Load Regulation OUT OUT V VΔ IOUT=1mA~600 mA 0.2 1 % Output Current I OUT V OUT>1.2V 600 mA Current Limit I LIMIT V OUT>1.2V 600 800 mA Short Circuit Current I SC V OUT<0.8V 300 600 mA Quiescent Current I Q I OUT=0mA 30 50 μA Ground Pin Current I GND I OUT=1mA~600mA 35 μA Dropout Voltage V D IOUT =600mA VOUT=VO(NOM)-2.0% 1.4V<VO(NOM)≤2.0V 1400 mV 2.0V<VO(NOM)≤2.8V 800 mV Over Temperature Shutdown OTS 150 °C Over Temperature Hysteresis OTH 30 °C Temperature Coefficient of Output Voltage TCVO 30 ppm/°C Power Supply Rejection PSRR IOUT =100mA COUT=2.2μF ceramic CBYP=0.01μF f=1kHz 75 dB f=10kHz 55 dB f=100kHz 30 dB Output Voltage Noise eN f=10Hz~100kHz, IOUT =10mA COUT=2.2μF , CBYP=0.1μF 30 μVrms EN Input Threshold VEH V IN=2.7V~7V 2.0 V IN V VEL V IN=2.7V~7V 0 0.4 V EN Input Bias Current IEH V EN=VIN, VIN=2.7V~7V 0.1 μA IEL V EN=0V, VIN=2.7V~7V 0.5 μA Shutdown Supply Current I SD V IN=5V, VOUT =0V, VEN<VEL 0.5 1 μA PG Leakage Current I LC V PG=7V 1 μA

UNISONIC TECHNOLOGIES CO., LTD 5 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 3 1 9 . F „ ELECTRICAL CHARACTERISTICS (Cont.) Adjusted Voltage PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Input Voltage V IN Note1 7 V Reference Voltage V REF 1.196 1.215 1.234 V Output Voltage Accuracy V OUT I OUT=1mA -1.5 1.5 % Line Regulation OUT OUT V VΔ VIN=VOUT+VD~7V, IOUT=1mA -0.15 0.15 % Load Regulation OUT OUT V VΔ IOUT=1mA VIN=VOUT+1~VOUT+2 Output Current I OUT V OUT>1.3V 600 mA Current Limit I LIMIT V OUT>1.3V 600 800 mA Short Circuit Current I SC V OUT<0.8V 300 600 mA Adjusted Current I ADJ I OUT=0mA 30 50 μA Ground Pin Current I GND I OUT=1mA~600mA 35 μA Dropout Voltage V D V OUT=VO(NOM)-2.0%, IOUT =600mA 600 mV Over Temperature Shutdown OTS 150 °C Over Temperature Hysteresis OTH 30 °C Temperature Coefficient of Output Voltage TCVO 30 ppm/°C Power Supply Rejection PSRR IOUT =100mA COUT=2.2μF ceramic CBYP=0.01μF f=1kHz 40 dB f=10kHz 20 dB f=100kHz 15 dB Output Voltage Noise eN f=10Hz~100kHz, IOUT =10mA COUT=2.2μF , CBYP=0.1μF 30 μVrms EN Input Threshold VEH V IN=2.7V~7V 2.0 V IN V VEL V IN=2.7V~7V 0 0.4 V EN Input Bias Current IEH V EN=VIN, VIN=2.7V~7V 0.1 μA IEL V EN=0V, VIN=2.7V~7V 0.5 μA Shutdown Supply Current I SD V IN=5V, VOUT =0V, VEN<VEL 0.5 1 μA PG Leakage Current I LC V PG=7V 1 μA Notes: 1. VIN(MIN)=VOUT+VD 2. To prevent the Short Circuit Cu rrent protection feature fr om being prematurely activated, the input voltage must be applied before a current source load is applied.

UNISONIC TECHNOLOGIES CO., LTD 6 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 3 1 9 . F „ TYPICAL APPLICATION CIRCUIT Fixed Voltage L1186INPUT GND VIN VOUT OUTPUT 2.2μF + C2 BYP EN 5V 1μF0 . 1 μF Adjusted Voltage IN GND ADJ OUT IN OUT 2.2µF 100p 1µF EN VOUT = 1.215 ( R1/R2 +1 ) C2 is unnecessary if R1 or R2 < 20 K R1 and R2 use resistance value within 1% accuracy for correct for correct VOUT EN

UNISONIC TECHNOLOGIES CO., LTD 7 of 7 www.unisonic.com.tw Q W - R 5 0 2 - 3 1 9 . F „ TYPICAL CHARACTERISTICS VIN (2V/DIV) VOUT (10mV/DIV) IO (500mA/DIV) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.