DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
I–19 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com L Series Miniature Slide Switches Features/Benefits
- Positive detent
- Enclosed housing
- Maintained and momentary functions
- PC and panel mounting
- RoHS compliant Typical Applications
- Communications equipment
- Lighting devices Specifications CONTACT RATING: Q contact material (LX0X, LX1X Models): 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL). See page I-23 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30ºC to +65ºC STORAGE TEMPERATURE: -30ºC to +85ºC NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center . Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I-20 through I-24. For additional options not shown in catalog, consult Customer Service Center. Models Available Materials HOUSING: 6/6 nylon (UL94V-2), black. ACTUATOR: 6/6 nylon (UL94V-2), black. ‘13’ actuator, natural (standard). CONTACTS: Q contact material: Copper, silver plated. See page I-23 for additional contact materials. TERMINALS: Q contact material: Copper, silver plated. See page I-23 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. Switch Function L202 DPDT L203 DP3T L101 SPST L102 SPDT L103 SP3T L104 SP4T L112 SPDT, mom. L113 SP3T, mom. to one end L123 SP3T, mom. to both ends L201 DPST L204 DP4T L212 DPDT , mom. Mounting Style MS PC Thru-hole MA Right angle, PC thru-hole ML Right angle, PC thru-hole MV Right angle, PC thru-hole SS Panel with mounting ears TS Panel with integral mounting ears Detent
1 With detent
2 Without detent
01 .200" high 02 .335" high 03 .375" high 05 .312" high 11 .100" high
12 Screwdriver slot
13 Plunger without cap
14 Plunger with .200" dia. cap 15 Plunger with .310" dia. cap 17 Plunger with .458" dia. cap 19 Plunger with .590" dia. cap Contact Material Q Silver B Gold G Gold over silver Seal NONE No seal E Epoxy seal Cap Color
2 Black
02 PC Thru-hole
01 Solder lug with notch
03 Solder lug with hole
04 PC Thru-hole
10 PC Thru-hole
06 Wire wrap
12 PC Thru-hole
I–20 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com ISlide L Series Miniature Slide Switches SWITCH AND LOCK FUNCTION ACTUATOR .200 5,08 Cap part number 7089 Cap part number 8018 Cap part number 7982 Cap part number 8940
14 PLUNGER WITH CAP13 PLUNGER WITHOUT CAP
15 PLUNGER WITH CAP
17 PLUNGER WITH CAP 19 PLUNGER WITH CAP
L101 SPST ML, MS, SS L102 SPDT ML, MS, SS L112 SPDT-MOM. ML, MS,MV, SS L103 SP3T MA, MS, TS L113 SP3T-MOM. to one end MA, MS, TS L123 SP3T-MOM. to both ends MA, MS, TS L104 SP4T MS SP AVAILABLE MOUNTING STYLESSCHEMATICSWITCH FUNCTION MODEL NO. NO. POLES L201 DPST MA, MS, SS L202 DPDT MA, MS, SS L212 DPDT-MOM. MV L203 DP3T MS, TS L204 DP4T MS DP AVAILABLE MOUNTING STYLESSCHEMATIC SWITCH FUNCTION MODEL NO. NO. POLES NOTE: and MOM. in table indicates momentary action. All models with all options when order ed with ‘G’ or ‘Q’ contact material. Contacts make on side actuator thrown. NOTE: No actuator color option code is r equired. Standard actuator color is black, other colors and heights available, consult Customer Service Center . See pages I-20 and I-22 for available mounting styles. ACTUATOR CAPS Caps supplied are not installed standard. To order actuator options ‘14 thru 19,’ select desired cap color from chart and place option code in last box of ordering format. Leave box empty for all other actuator options. Caps may also be ordered separately and user installed, see pages I-23 and I-24. Specify the four digit part number and desir ed cap color. For switches without caps, order ‘13’ or ‘23’ actuator option. Cap finish: gloss (excluding square cap part number 7982, finish: matte). SPLASH CAPS New protective splash caps for PC mounted slide switches are available separately and reusable. They provide splash protection during soldering and cleaning processes. To order specify correct part number, see page I-24. Other colors available, consult Customer Service Center. ACTUATOR OPTIONS FOR ‘MS, MA, ML, SS, & TS’ MOUNTING STYLES ACTUATOR OPTIONS FOR ‘MV’ MOUNTING STYLE ACTUATOR CAP COLOR 1 2 3
I–21 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com L Series Miniature Slide Switches DETENT MOUNTING STYLE MA RIGHT ANGLE, PC THRU-HOLE MS PC THRU-HOLE, 2 POSITION MODELS L203011MS02Q DP3T L202021MA04Q Horizontal Actuation DPDT Standard with all maintained models: L101, L102, L103, L104, L113, L201, L202, L203 and L204. Standard with all momentary models: L112, L123, and L212. AVAILABLE WITH: Models: L101, L102, L112, L103, L113 L123, L201, L202, L203, L104 and L204 Terminations: 02, 06, 10 and 12 Actuators: 01, 02, 03, 05, 11 and 12 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. Splash caps ar e available separately and reusable, see page I-24. AVAILABLE WITH: Models: L103, L201, L202, L113 and L123 Terminations: 04 Actuators: 02 and 12 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. Splash caps ar e available separately and reusable, see page I-24. .425 (10,79) .752 (19,10) .150 TRAVEL (3,81) .125 TYP (3,18) .200 (5,08) .200 (5,08) .070 TYP (1,78) .221 TYP (5,61) .181 TYP (4,60) .288 (7,32) .050 X .020 TYP (1,27) X (0,51) .225 TYP (5,71) TERMINAL NOS. FOR REFERENCE ONLY .181 TYP (4,60) .065 DIA (1,65) TYP .225 TYP (5,70) .400 (10,16) 0.941 (23,90) .335 (8,51) .412 (10,46) .100 TYP (2,54) 0.125 (3,18) .200 (5,08) .140 (4,06) TRAVEL .215 (5,46) .256 (6,50) .100 TYP (2,54) .181 TYP (4,60) 1 TERM. NOS. FOR REFERENCE ONLY .425 (10,79) 1.122 (28,50) .170 TRAVEL (4,32) TYP .200 (5,08) .070 TYP (1,78) .050 TYP (1,27) .181 TYP (4,60) .288 (7,32) .050 X .020 TYP (1,27) X (0,51) .225 TYP (5,71) TERMINAL NOS. FOR REFERENCE ONLY .181 TYP (4,60) .065 DIA (1,65) TYP .225 TYP (5,70) .232 TYP (5,89) RIGHT ANGLE, PC, SP-3 POSITION MODELS PC THRU HOLE, 4 POSITION MODELS PC THRU-HOLE, 3 POSITION MODELS
I–22 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com ISlide .425 (10,80)
5.160 TYP
(4,06) TRAVEL .125 (3,18) 1.000 (25,40) .941 (23,90) .200 (5,08) .200 (5,08) .070 TYP (1,78) .240 (6,10) .181 (4,60) TYP .358 (9,09) 1.000 (25,40) .135 (3,43) .110 DIA (2,79ø) .530 (13,46) CAVITY I.D.
0.0625 HIGH X
0.010 RAISED
0.080 (2,03) FULL R TYP. 0.250 (6,35)ø ø 0.100 TYP (2,54) 2X 0.218 (5,53) 2X 0.050 (1,27) 2X 0.050 (1,27) 0.100 (2,54) 1.000 (25,40) L Series Miniature Slide Switches MV RIGHT ANGLE, PC THRU-HOLE ML RIGHT ANGLE, PC THRU-HOLE L102021ML04Q Horizontal Actuation SPDT L212132MV02Q DPDT AVAILABLE WITH: Models: L101, L102, L112 Terminations: 04 Actuators: 01, 02, 05, 11 and 12 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. Splash caps are available separately and reusable, see page I-24. A VAILABLE WITH: Models: L112 and L212 T erminations: 02, 06, 10 and 12 Actuators: 13 thru 19 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. Splash caps ar e available separately and reusable, see page I-24. MOUNTING STYLE TS PANEL WITH INTEGRAL MOUNTING EARS AVAILABLE WITH: Models: L103, L113, L123 and L203 Terminations: 01, 02, 03, 06, 10, 12 Actuators: 01, 02, 03, 05, 11 and 12 L202011SS03Q DPDT L203011TS03Q DP3T .110 DIA (2,79ø) TYP .360 (9,14) 1.000 (25,40) .135 (3,43).225 (5,72) .760 (19,30) .181 TYP (4,60) .358 (9,09) .070 TYP (1,78) .240 (6,10).050 (1,27) .200 (5,08) .200 (5,08) 1.200 (30,48) 1.000 (25,40) .425 (10,60) .125 (3,18) .150 (3,81) TRAVEL ø .100 (2,54) AVAILABLE WITH: Models: L101, L102, L112, L201 and L202 Terminations: 01, 02, 03, 06, 10, 12 Actuators: 01, 02, 03, 05, 11 and 12 SS PANEL WITH MOUNTING EARS PANEL MOUNTING PANEL MOUNTING
I–23 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com L Series Miniature Slide Switches CONTACT MATERIAL SEAL EPOXY .075 MAX. (1,91) E EPOXY SEALNONE NO SEAL * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. 2 CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. All models with all options when ordered with ‘G’ or ‘Q’ contact material. NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. TERMINATIONS .240 (6,10) .028 (0,71) .020 THK. (0,51) .080 (2,03) .062 (1,57) .226 (5,74) .050 (1,27) .020 THK. (0,51) .080 (2,03) .060 (1,52) .240 (6,10) .046 (1,17) .020 THK. (0,51) .080 (2,03) .085 (2,16) .256 (6,50) .050 (1,27) .020 THK. (0,51) .080 (2,03) .085 (2,16) .181 TYP. (4,60) .225 (5,72) .065 DIA (1,65ø) TYP. .187 TYP . (4,75) .065 DIA (1,65ø TYP. .181 TYP. (4,60) .272 (6,91) .065 DIA (1,65ø) TYP. .181 TYP. (4,60) .225 (5,72) .065 DIA (1,65ø) TYP. .181 TYP. (4,60) .272 (6,91) .065 DIA (1,65ø) TYP. .181 TYP. (4,60).225 (5,72) .065 DIA (1,65ø) TYP. .181 TYP. (4,60) .272 (6,91) .065 DIA (1,65ø) TYP. All models with ‘04’ terminations and ‘ML’ mounting style. All 2 position models, except ‘04’ and ‘10’ terminations. All 2 position models with ‘04’ and ‘10’ terminations. All 3 position models except ‘04’ and ‘10’ terminations. All 3 position models, with ‘10’ termination. All 4 position models, except ‘04’ and ‘10’ terminations. All 4 position models, with ‘10’ terminations. .445 (11,30) .050 (1,27) .020 THK. (0,51) .080 (2,03) .065 (1,65) .226 (5,74) .050 (1,27) .020 THK. (0,51) .080 (2,03) .272 (6,91) .419 (10,64) .050 (1,27) .020 THK. (0,51) .080 (2,03)
12 PC THRU-HOLE 06 WIRE WRAP
02 PC THRU-HOLE 01 SOLDER LUG WITH NOTCH 03 SOLDER LUG WITH HOLE 10 PC THRU-HOLE
‘MA & ML’ Mounting Styles Only ‘MS, MV, SS & TS’ Mounting Styles Only LX0X, LX1X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL). LX6X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL). 0.4 VA MAX. @20 V AC OR DC max. LX0X, LX1X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL). LX6X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL). LOW LEVEL/DRY CIRCUIT OR POWER POWER LOW LEVEL/DRY CIRCUIT GOLD OVER SILVER GOLD 1 SILVER 2 OPTION CODE RATINGSCONTACT MATERIAL Q B G
I–24 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com ISlide AVAILABLE HARDWARE .200 DIA. (5,08 ).120 (3,05) .155 (3,94) .375 DIA. (9,53 ) .120 (3,05) .250 (6,35) .310 DIA. (7,87 ) .250 (6,35) .138 (3,51) Cap Compatible with 13-19 actuators PART NO.
708902000 BLACK
708903000 RED
Material: Nylon Finish: Gloss Cap Compatible with 13-19 actuators PAR T NO. 452D02000 BLACK 452D03000 RED Material: Nylon Finish: Gloss Cap Compatible with 13-19 actuators PAR T NO.
894102000 BLACK
894103000 RED
Material: Nylon Finish: Gloss Cap Compatible with 13-19 actuators PAR T NO.
484602000 BLACK
484603000 RED
Material: Nylon Finish: Gloss PART NO.
798202263 BLACK
798203000 RED
Material: Nylon Finish: Matte Cap Compatible with 13-19 actuators PAR T NO.
752702000 BLACK
752703000 RED
Material: Nylon Finish: Gloss Cap Compatible with 13-19 actuators PAR T NO.
801802000 BLACK
801803000 RED
Material: Nylon Finish: Gloss .450 SQ. (11,43) .195 (4,95) .240 (6,10) L Series Miniature Slide Switches Cap Compatible with 01-05 actuators PART NO.
120100602 BLACK
Material: Nylon Finish: Matte Splash Cap PAR T NO. 120100200 Material: Nylon Splash Cap PAR T NO. 120100300 Material: Nylon NOTE: Other colors available, consult Customer Service Center. Splash Cap PART NO. 120100400 Material: Nylon Fits ‘MA’ mounting style, LXX3 models only. Fits ‘MS’ mounting style, LXX1 & LXX2 models only. Fits ‘MV’ mounting style, LX1X models only.