KWT-542 LUCKY-LIGHT | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
B C DEF G 1 G2 J K LM NHD P DIG 1 DIG 2 2, 7, 11, 13&16 No PIN AB C D E F G 1 G 2 J K L M N HD PA PACKAGE DIMENSIONS PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 o C AMBIENT) C.C or C.A Hi-Eff. Red Super Red Green Super Green Yellow Hi-Eff Red Super Red Green Super Green Yellow Emitted Color GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP Raw Material Chip 635 660 565 570 585 635 660 565 570 585 (nm) 100 100 100 100 100 100 100 100 100 100 Pd (mW) 100 100 100 100 100 100 100 100 100 100 If (Peak) (mA) If (Rec) mA Absolute Maximum Ratings If (mA) 1.7 1.5 1.7 1.7 1.7 1.7 1.5 1.7 1.7 1.7 1.9 1.9 2.2 2.2 1.9 1.9 1.9 2.2 2.2 1.9 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 750 5600 750 850 700 750 5600 750 850 700 2000 21000 2000 2200 1600 2000 21000 2000 2200 1600 Electro-optical Data(at 10mA) KWT-542A3 KWT-542AS KWT-542A2 KWT-542AG KWT-542A6 KWT-542C3 KWT-542CS KWT-542C2 KWT-542CG KWT-542C6 Part No. Common Anode Common Cathode Wave Length λρ (nm) Vf (V) Per Segment Min. Typ. Max. Iv (µcd) Per Segment Min. Typ. REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the t otal number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commissi on on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent). DESCRIPTION: The KWT-542 series is 0.54 inch (13.72mm) height 14-segment dual digit alphanumeric displays with the right DPs. This series is suitable for use in instrument panels, digital readout displays. All devices are available as either common anode or common cathode. KWT-542 SERIES Alphanumeric LED Display Dual Digit (0.54") TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA ABSOLUTE MAXIMUM RATINGS: (Ta=25 o Max 5 V 100µA 0.4mA/ oC -40oC To 85oC -40oC To 100oC Parameter Reverse Voltage per segment Reverse Current per segment (Vr = 5V) Derating Linear from 25 oC per segment Operating Temperature Range Storage Temperature Range Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260 oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. PIN 1. 8.00 1.10 DIG. 1 DIG. 2 A BK LMN G1 G2 JH C DPD E F 12.70 25.20 2.54*8=20.32 15.24 21.10 7.80 13.72(.54") 5.0 o φ0.50 515 8 B C DEF G 1 G2 J K LM NHD P DIG 1 DIG 2 2, 7, 11, 13&16 No PIN AB C D E F G 1 G 2 J K L M N HD PA