KW1-1002XY LUCKY-LIGHT | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
A B C D DP E F G 14.10(0.555) o 24.0(0.945) 25.4(1.0) 34.0(1.339) 30.48(1.20) PIN 1. 10.50(0.414) 4.80 min. 2.54*4=10.16 φ0.50(0.020) PACKAGE DIMENSIONS PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 o C AMBIENT) C.C or C.A Hi-Eff Red Green Super Red Super Green Yellow Green Hi-Eff Red Green Super Red Super Green Yellow Green Emitted Color GaAsP/GaP GaP GaAlAs GaP GaAsP/GaP GaP GaAsP/GaP GaP GaAlAs GaP GaAsP/GaP GaP Raw Material Chip 635 565 660 570 585 565 635 565 660 570 585 565 (nm) 100 100 100 100 100 100 100 100 100 100 100 100 Pd (mW) 100 100 100 100 100 100 100 100 100 100 100 100 If (Peak) (mA) If (Rec) mA Absolute Maximum Ratings If (mA) 3.4 3.4 3.0 3.4 3.4 3.4 3.4 3.4 3.0 3.4 3.4 3.4 3.8 4.4 3.8 4.4 3.8 4.4 3.8 4.4 3.8 4.4 3.8 4.4 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 1600 1200 10000 1350 1200 1200 1600 1200 10000 1350 1200 1200 4200 4000 40000 4500 3200 4000 4200 4000 40000 4500 3200 4000 Electro-optical Data(at 10mA) KW1-1002A32 KW1-1002ASG KW1-1002A26 KW1-1002C32 KW1-1002CSG KW1-1002C26 Part No. Common Anode Common Cathode Wave Length λρ (nm) Vf (V) Per Segment Min. Typ. Max. Iv (µcd) Per Segment Min. Typ. REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the t otal number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commissi on on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent). KW1-1002XY SERIES Multi-Color LED Numeric Display Single Digit (1.00") DESCRIPTION: The KW1-1002XY series is large multi-color single digit display in 1.00 inch (25.40mm) height with right DP designed for accurate readable displays need to be viewed over a distance. This series is suitable for use in instruments, digital readout displays. All devices are available as either common anode or common cathode. TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA ABSOLUTE MAXIMUM RATINGS: (Ta=25 o Max 5 V 100µA 0.4mA/ oC -40oC To 85oC -40oC To 100oC Parameter Reverse Voltage per segment Reverse Current per segment (Vr = 5V) Derating Linear from 25 oC per segment Operating Temperature Range Storage Temperature Range Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260 oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect.