KW1-1001 LUCKY-LIGHT | Alldatasheet
Document overview
- Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Single Digit (1.00") INTERNAL CIRCUIT DIAGRAM A 3, 6, 14 4, 5 & 12 NO PIN B CD EFG D P 11 3 1 08 7 21 19 PACKAGE DIMENSIONS PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 o C AMBIENT) C.C or C.A Hi-Eff. Red Super Red Green Super Green Yellow Hi-Eff Red Super Red Green Super Green Yellow Emitted Color GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP Raw Material Chip 635 660 565 570 585 635 660 565 570 585 (nm) 100 100 100 100 100 100 100 100 100 100 Pd (mW) 100 100 100 100 100 100 100 100 100 100 If (Peak) (mA) If (Rec) mA Absolute Maximum Ratings If (mA) 3.4 3.0 3.4 3.4 3.4 3.4 3.0 3.4 3.4 3.4 3.8 3.8 4.4 4.4 3.8 3.8 3.8 4.4 4.4 3.8 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 10-20 1600 5600 1200 1350 1200 1600 5600 1200 1350 1200 4200 40000 4000 4500 3200 4200 40000 4000 4500 3200 Electro-optical Data(at 10mA) KW1-1001A3 KW1-1001AS KW1-1001A2 KW1-1001AG KW1-1001A6 KW1-1001C3 KW1-1001CS KW1-1001C2 KW1-1001CG KW1-1001C6 Part No. Common Anode Common Cathode Wave Length λρ (nm) Vf (V) Per Segment Min. Typ. Max. Iv (µcd) Per Segment Min. Typ. REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the t otal number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commissi on on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent). DESCRIPTION: The KW1-1001 series is large single digit display in 1.00 inch (26.00mm) height with right DP designed for accurate readable displays need to be viewed over a distance. This series is suitable for use in instruments, digital readout displays. All devices are available as either common anode or common cathode. TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA ABSOLUTE MAXIMUM RATINGS: (Ta=25 o Max 5 V 100µA 0.4mA/ oC -40oC To 85oC -40oC To 100oC Parameter Reverse Voltage per segment Reverse Current per segment (Vr = 5V) Derating Linear from 25 oC per segment Operating Temperature Range Storage Temperature Range Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260 oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. A B CE D 22.40 1.80 13.00 PIN 1 15.24 2.54*6=15.24 33.00 8.50 26.00(1.0") DP F G φ0.50 7.0 o A 3, 6, 14 4, 5 & 12 NO PIN B CD EFG D P 11 3 1 08 7 21 19