KITVALVECNTLEVM FREESCALE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 18
Technical content
Datasheet sections
- 1 Important Notice
- 2 Getting Started
- 3 Getting to Know the Hardware
- 4 Installing the Software and Setting up the Hardware
- 5 Schematics, Board Layout and Bill of Materials
- 6 References
- 7 Revision History
Freescale Semiconductor, Inc. © Freescale Semiconductor, Inc., 2015. All rights reserved. Figure 1. KITVALVECNTLEVM
KTVALVECNTLEVMUG Rev. 1.0 Freescale Semiconductor, Inc. 3
1 Important Notice
Freescale provides the enclosed product(s) under the following conditions: This evaluation kit is intended for use of ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY . It is provided as a sample IC pre-soldered to a printed circuit board to make it easier to access inputs, outputs, and supply terminals. This evaluation board may be used with any development system or other source of I/O signals by simply connecting it to the host MCU or computer board via off-the-shelf cables. This evaluation board is not a Reference Design and is not intended to represent a fina l design recommendation for any particular application. Final device in an application will be heavily dependent on proper printed circuit boar d layout and heat sinking design as well as attention to supply filtering, transient suppression, and I/O signal quality. The goods provided may not be complete in terms of requ ired design, marketing, and or manufacturing related protective considerations, including product safety measur es typically found in the en d product incorporating the goods. Due to the open construction of the product, it is the user's responsibility to take any and all appropriate precautions with r egard to electrostatic dischar ge. In order to minimize risks associated with the customers applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. For any safety concerns, contact Freescale sales and technical support services. Should this evaluation kit not meet the specifications indicated in the kit, it may be returned within 30 days from the date of delivery and will be replaced by a new kit. Freescale reserves the right to make changes without fu rther notice to any products herein. Freescale makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale assume any liability arising out of the applicat ion or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typical”, must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale product could create a situation where personal injury or death may occur. Should the Buyer purchase or use Freescale products for any such unintended or unauth orized application, the Buyer shall indemnify and hold Freescale and its officers , employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges Freescale was negligent regarding the des ign or manufacture of t he part.Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2015
KTVALVECNTLEVMUG Rev. 1.0 4 Freescale Semiconductor, Inc.
2 Getting Started
2.1 Kit Contents/Packing List
The KITVALVECNTLEVM contents include:
- Assembled and tested evaluation module in anti-static bag.
- USB to FTDI cable
- USB Key containing – A code example – Schematics – Gerber files – Bill of Materials – Graphical User Interface software – A training package/user guide
- Warranty card
2.2 Jump Start
Freescale’s analog product development boards help to easily evaluate Freescale products. These tools support analog mixed signal and power solutions including monolithic ICs using proven high-volume SMARTMOS mixed signal technology, and system-in-package devices utilizing power, SMARTMOS and MCU dies. Freescale products enable longer battery life, smaller form factor, component count reduction, ease of design, lower system cost and improved performance in powering state of the art systems.
- G o t o www.freescale.com/KITVALVECNTLEVM
- Review your Tool Summary Page
- Look for
- Download documents, software and other information Once the files are downloaded, review the user guide in the bundle. The user guide includes setup instructions. Jump start bundles are available on each tool summary page with the most relevant and current information. The information includes everything needed for design.
2.3 Required Equipment and Software
To use this kit, you need:
- A DC Power Supply with variable voltage (0 to 16 V), 10 A capability
- A 5.0 V DC Power Supply with 200 mA capability
2.4 System Requirements
The kit requires the following to function properly with the software:
- Windows® XP, Windows 7, or Vista in 32- and 64-bit versions Jump Start Your Design
3 Getting to Know the Hardware
3.1 Board Overview
connector that allows direct access to the MC34SB0800 and MC34SB0410 SPI pins.
3.2 Board Features
- Support for both MC34SB0800 and MC34SB0410 (either separately or in unison)
- SPI port providing direct access to MCU SPI pins
- CAN and LIN bus connectors
3.2.1 Device Features
Table 1. Device Features
- Operating voltage 6.0 V to 36 V
- Eight Valve Controls - Four current regulated, four PWMed
- High-side predriver for valve protection
- Pump motor predriver up to 500 Hz PWM
- 16-bit SPI interface with watchdog
- Three 10-bit ADC channels MC34SB0410 Quad Valve and Pump System on Chip
- Operating voltage 6.0 V to 36 V
- Four Current-regulated or PWM Valve Controls
- Pump motor predriver up to 16 kHz PWM
- 16-bit SPI interface with watchdog
- Three 10-bit ADC channels MC9S12XEP 16-bit MCU for General Purpose Automotive and Industrial Applications
- S12X CPU @ 50Mhz bus speed
- ADC 12-bit resolution and 3 µs conversion time
- Pulse width modulator (PWM)
- Serial peripherial interface (SPI)
- Serial communication interface (SCI)
- Background debug module (BDM) debugger (xDBG) MCZ33903 System Basis Chip
- Voltage regulator for MCU, 5.0 V or 3.3 V
- ISO11898-5 high-speed CAN interface compatibility for baud rates of 40 kb/s to 1.0 Mb/s
- Fully-protected embedded 5.0 V regulator for the CAN driver
- Advanced SPI, MCU, ECU power supply and cr itical pins diagnostics and monitoring
- Auxiliary 5.0 V or 3.3 V SPI configurable regulator, for additional ICs
6 Freescale Semiconductor, Inc.
3.2.2 GUI-enabled Features
Table 2. GUI-enabled Features
- Current Value Targeted
- Duty-cycle
- Change PI Value
- Change Frequency
- Turn ON/OFF
- P W M
- Control by ex- ternal pin (ADN1) Turn ON/OFF
- Turn ON/OFF
- Control by ex- ternal pin (ADN2) Frequency Mod- ulation selec- tion (for the Main clock) READ Overcurrent
- Overcurrent
- Open load
- Overtemperature
- VDS monitoring
- Current Targeted
- Duty-cycle value for gate driver Overcurrent
- Overcurrent
- Open load
- Overtemperature
- VDS Monitoring
- Overcurrent
- Open load
- Overtempera- ture
- VDS Monitor- ing
- Internal Ana- log Regulator Voltage
- Internal Digital Regulator Voltage
- Internal 10 V and 12 V Reg- ulator Voltage
- Charge Pump Voltage
- Die tempera- ture Monitoring of ADIN pin (LSB)
3.3 Board Description
Figure 2 and Table 3 below describe the major components of the KITVALVECNTLEVM evaluation board. Figure 2. KITVALVECNTLEVM Board Description Table 3. Board Description
8 Freescale Semiconductor, Inc.
3.4 Connectors
Figure 3. KITVALVECNTLEVM Connectors Table 4. KITVALVECNTLEVM Connectors
3.5 Test Point Definitions
3.6 Jumper Definitions
Table 5. Test Point Definitions Table 6. Jumper Definitions Table 4. KITVALVECNTLEVM Connectors (continued)
10 Freescale Semiconductor, Inc.
4 Installing the Software and Setting up the Hardware
4.1 Installing User Firmware on the KITVALVECNTLEVM
- Purchase a USB BDM Multilink programming cable (See the P&E Micro site at the following url:
https://www.pemicro.com/products/product_viewDetails.cfm?product_id=33).
- Locate the programming connector (see Table 4) on the EVB. Attach the 6-pin (Berg) connector to the program connector.
Make sure the red wire side of the cable is at the J1 side of the connector.
- Attach the USB end of the cable to the PC
- Install Freescale’s CodeWarrior V10.x on the PC
- Use the S12Z Multilink Programmer/Debugger to perform the programming and download the code.
4.2 Installing CodeWarrior
(Eclipse IDE) can be downloaded from freescale.com/CodeWarrior. requires the S12Z component. Select the S12Z component and click on “Next” to complete the installation. Figure 4. Code Warrior GUI
4.3 Configuring the Hardware
Figure 5 shows the configuration diagram for the KITVALVECNTLEVM. Figure 5. Board Setup
12 Freescale Semiconductor, Inc.
4.3.1 Step-by-step Instructions for Setting up the Hardware
- Make sure the "GUI_EVM_VAPS_REV1.0" program is installed on the PC and can communicate with the
GUI_EVM_VAPS_REV1.0 on the PC.
- Attach a +12 VDC power supply (do not turn power on yet) to the VPWR connector on the KITVALVECNTLEVM board. Make
terminal is connected to the screw terminal labeled "VPWR".
- Attach a +5 VDC power supply (do not turn power on yet) to the VCC5 connector on the KITVALVECNTLEVM board. Make
terminal is connected to the screw terminal labeled "VCC5".
- Turn on the +12 VDC power supply. Then turn on the +5 VDC power supply.
- Connect the USB to FTDI cable with the USB plug connected to the computer and the FTDI plug to the board as shown in
Figure 6. Connection to the PC
- Launch the GUI "GUI_EVM_VAPS_V1.0.exe"
- You should see the screen shown in Figure 7:
Figure 7. GUI Start-up View
- Select the port COM used by the USB to FTDI cable.
- Start the GUI by clicking the arrow, as shown below:
- Select the tab "OCTAL-Monitoring"
- You should see the screen shown in Figure 8:
14 Freescale Semiconductor, Inc. Figure 8. Octal Monitoring Screen
- Click on the "Start" button. The voltage on each dashboard should arrive at a stabilized value.
- As a typical example, Digital & Analog Supply will be set around 2.5 V, internal regulator 10 V around 9.5 V to 10 V and the
other internal regulator 12V around 11.5 V to 12 V. Finally Internal Charge Pump supply should be set around 13 V.
Schematics, Board Layout and Bill of Materials KTVALVECNTLEVMUG Rev. 1.0 Freescale Semiconductor, Inc. 15
5 Schematics, Board Layout and Bill of Materials
KITVALVECNTLEVM board schematics, board layout, and bill of materials are available in the Download section of the KITVALVECNTLEVM Tool Summary page: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KITVALVECNTLEVM.
KTVALVECNTLEVMUG Rev. 1.0 16 Freescale Semiconductor, Inc.
6 References
Following are URLs where you can obtain information on related Freescale products and application solutions:
6.1 Support
Visit www.freescale.com/support for a list of phone numbers within your region.
6.2 Warranty
Visit www.freescale.com/warranty for a list of phone numbers within your region. Freescale.com Support Pages Description URL KITVALVECNTLEVM Tool Summary Page http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=KITVALVECNTLEVM MC34SB0410 Product Summary Page http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MC34SB0410 MC34SB0800 Product Summary Page http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MC34SB0800 MC33903 Product Summary Page http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MC33903 S12XE Product Summary Page http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=S12XE CodeWarrior CodeWarrior Page www.freescale.com/CodeWarrior
Revision History
KTVALVECNTLEVMUG Rev. 1.0 Freescale Semiconductor, Inc. 17
7 Revision History
Revision Date Description of Changes 1.0 6/2015 • Initial Release
Document Number: KTVALVECNTLEVMUG Rev. 1.0 Information in this document is provided solely to enable system and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. & Tm. Off. SMARTMOS is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2015 Freescale Semiconductor, Inc. How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support